R Tie-wraps - Whipping Knot for Overbraiding R NSA8420-7 R Figure 008

20-33-44 Page 17

R Tie-wraps - Separation Knot for Overbraiding R NSA8420-7 R Figure 009

20-33-44 Page 18

R Tie-wraps - Separation Knot for Overbraiding R NSA8420-7 R Figure 010

20-33-44 Page 1920-33-45 Page 1

 _____________________________________________________________________BACKSHELL , END PIECE AND CONDUIT FITTING - DESCRIPTION AND OPERATION
 _______1. General 
R
 This chapter gives the main backshell, end piece and conduit fitting
 description and installation used on aircraft: 
R  - Backshell for circular connector, 
R  - Backshell for rectangular connector, 
R  - Backshell for convoluted conduit with circular connector, 
R  - Backshell for screened conduit with circular connector, 
R  - End piece and conduit fitting at conduit end.
 ________________________________2. Backshell for Circular Connector
 (Ref. Fig. 001) 
R
 This type of backshell has for example the codes that follow:
 - By cable tie attachment: 
R  E0080 backshell for NAS1599 (E0039, E0040, E0041, E0052, E0053, E0054) and
 MIL-C-83723 (E0186, E0579, E0195, E0320, E0321, E0322) connector type. 
R  ABS0638 backshell for NAS1599 (E0039, E0040, E0041, E0052, E0053, E0054) 
R  and MIL-C-83723 (E0320, E0321, E0322) connector type.
 NSA938112 backshell for MIL-C-26500 (E0077, E0079, E0110) connector type. 
R
 - By clamp attachment:
 NSA938150 backshell for NAS1599 (E0039, E0040, E0041, E0052, E0053, E0054)
 ABS0872 backshell for MIL-C-26482 connector type.
 NSA938163 backshell for MIL-C-26500 (E0070, E0079, E0110) connector type.
 E0344 backshell for MIL-C-5015 (E0093, E0094, NSA938931 and NSA938932)
 connector type.
 NSA938155 backshell for MIL-C-5015 (NSA938931, NSA938932, E0093, E0094)
 connector type
 NSA938921 backshell for MIL-C-5015 (NSA938925, E0111, E0233) connector
 type.
 E0199 backshell for MIL-C-83723 (E0195, E0197) connector type.
 ABS0126 backshell for PREN2997 (E0452, E0454) connector type.
 E0455 backshell for PREN2997 (E0451, E0452, E0454) connector type.
 E0549 backshell for MIL-C-38999 (E0545) connector type.
 E0617 backshell for MIL-C-38999 (E0545) connector type. 
R
 - Without bundle attachment:
 NSA938003 threads Protector for NAS1599 (E0052, E0053, E0054) connector
 type 
R  A. E0080, ABS0638 and NSA938112 backshells
 (Ref. Fig. 001)
 (1) P/N identification

R Backshell, End Piece and Conduit Fitting - P/N Characteristics and Installation R E0080, NSA938003 and NSA938150 R Figure 001

20-33-45 Page 2

 Backshell: E0080  - 01  - 12  C
 |  |  |  |
 |  |  |  ----- Color code : C = black
 |  |  |  N = olive green
 |  |  |
 |  |  --------- Size code (08 to 24)
 |  |

 | ---------------- Type code : 01 = straight | 02 = elbowed | ------------------------ Standard P/N
 Protective pad alone: E0080 -CP1 | | | ---------- Material code (green color) | ------------------- Standard P/N
 (2)
 P/N characteristics

 (a) Temperature Minimum operating temperature is -55 deg.C (-67.00 deg.F) Maximum operating temperature is 175 deg.C (347.00 deg.F)

 (3)
 Installation procedure

 -Install the backshell on the wires before you connect them to the connector.
 -Screw the backshell on the connector.
 -Tighten the backshell with pliers UTICA 529 or equivalent.
 ____
NOTE : To make the tightening of the backshell easer you can use a tightening support SOURIAU 580030 or equivalent.
 -If necessary, safety the connector (ref 20-51-12).
 -On metal backshell install a protective pad E0080-CP1 or NSA935404 between the backshell and the bundle.
 -Attach the bundle to the backshell with a cable tie NSA935401.

20-33-45 Page 3
 Apr 01/03
R

 B. NSA938150, ABS0872, NSA938163, E0344, NSA938155, NSA938921, E0199, ABS0126, E0455, E0549 and E0617 backshells (Ref. Fig. 001)
 (1) P/N identification
 NSA938150  - 01  - 10
 |  |  |
 |  |  --------------- Size code (08 to 24)
 |  |
 |  ---------------------- Type code
　
中國航空網 www.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：A320 ESPM Electrical Standard Practices Manual 2(81)