B.
Standard Tools and Equipment
(1)
Pins - Ground Lock
C.
References
(1)
AMM 07-11-11/201, Airplane Jacking
(2)
AMM 32-00-01/201, Ground Lockpins
(3)
AMM 32-32-91/401, Downlock Springs
D.
Access
(1)
Location Zone
310 Left Main Landing Gear
410 Right Main Landing Gear
E.
Procedure
S 844-002
(1)
Make sure that the ground lockpins (AMM 32-00-01/201) are installed in all the gears.
S 584-003
(2)
Lift the airplane on jacks until the wheels nearly touch the ground (AMM 07-11-11/201).
S 024-004
(3)
Remove the downlock springs (2) (AMM 32-32-91/401).
(4)
Hold the downlock strut and the upper and lower side struts.
(5)
Remove the bolt keeper (6) and the retaining bolt (5).
S 024-007
(6)
Use the thread protector and remove the bolt (5) to disconnect the downlock strut (3) from the reaction link (4).
S 024-008
(7)
Use the thread protector and remove the attachment bolt (10) to disconnect the downlock strut (7) from the lower and upper side strut (9, 11).
(8)
Remove the downlock strut (3).
S 024-005
S 024-006
S 024-009
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
32-11-89
ALL ú ú 02 Page 401 ú Mar 15/98
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A 737-300/400/500MAINTENANCE MANUAL
SEE A SEE B
2. DOWNLOCK
1. DOWNLOCK ACTUATOR
SEE C SIDE STRUT
6. KEEPER
3. LOCK STRUT
5. BOLT
B
SPRING
3.
DOWNLOCK STRUT
4.
REACTION LINK
A
DOWNLOCK SENSOR ACTUATOR
7. DOWNLOCK STRUT LOWER LINK
11. UPPER SIDE
STRUT
4. REACTION LINK
10. LOCK STRUT LOWER
ATTACHMENT BOLT
DOWNLOCK STRUTUPPER LINK
8.
SPACER WASHER
9.
LOWER SIDE STRUT
INBD FWD
SIDE STRUT CENTER ATTACHMENT C
Main Gear Downlock Strut Installation
Figure 401
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
32-11-89
ALL ú ú 01 Page 402 ú Nov 15/92
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A 737-300/400/500MAINTENANCE MANUAL
TASK 32-11-89-404-010
3. Install Main Gear Downlock Strut (Fig. 401)
________________________________
A. Special Tools and Equipment
(1)
Thread Protector and Alignment Tool- F80115-14 (F80115-5, Optional) Use to protect the threads of the bolts which connect the downlock strut to the reaction link and the side strut.
B.
Consumable Materials
(1)
G01395 Compound - Corrosion Inhibiting, BMS 3-27, Mastinox 6856K
(2)
D00633 Grease - BMS 3-33
(3)
D00013 Grease - MIL-PRF-23827
C.
References
(1)
AMM 07-11-11/201, Airplane Jacking
(2)
AMM 12-21-11/301, Main Gear Lubrication
(3)
AMM 29-15-00/201, Hydraulic Systems
(4)
AMM 32-00-01/201, Ground Lockpins
(5)
AMM 32-32-91/401, Main Gear Downlock Springs
D.
Access
(1)
Location Zone
310 Left Main Landing Gear
410 Right Main Landing Gear
E.
Procedure
S 644-011
WARNING: USE NITRILE GLOVES FOR SKIN PROTECTION AGAINST BMS 3-27
_______ (MASTINOX 6856K). IF MASTINOX GETS ON YOUR SKIN, IMMEDIATELY REMOVE IT WITH WATER. IF THIS MATERIAL GETS IN YOUR EYES, IMMEDIATELY FLUSH YOUR EYES WITH WATER AND GET MEDICAL AID. THIS MATERIAL CONTAINS VERY POISONOUS AND FLAMMABLE AGENTS WHICH CAN CAUSE INJURIES TO PERSONS.
中國航空網 www.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：737-300 400 500 AMM 飛機維護手冊 起落架 LANDING GEAR 1(121)
