曝光臺 注意防騙 網曝天貓店富美金盛家居專營店坑蒙拐騙欺詐消費者

_________________________________________________
 1.  General
 A.  This procedure gives the steps to remove and install the main gear upper drag strut (referred to as the upper drag strut).
 TASK 32-11-31-004-001
 2.  Remove the Main Gear Upper Drag Strut (Fig. 401)_____________________________________
 A.  Standard Tools and Equipment
 (1)  
Assemblies - Ground Lock (AMM 32-00-01/201)

 B.  
References

 (1)  
AMM 07-11-11/201, Airplane Jacking

 (2)  
AMM 32-00-01/201, Ground Lock Assemblies

 C.  
Access

 (1)  
Location Zone
 310 Left Main Landing Gear
 410 Right Main Landing Gear

 D.  
Prepare for the Removal of the Upper Drag Strut

 S 844-002
 (1)  
Make sure that all the ground lockpins (AMM 32-00-01/201) are installed.

 S 844-003

 (2)
Lift the airplane on jacks until the wheels are off the ground.

 E.  
Remove the Upper Drag Strut

 S 034-004
 (1)  
Release the clamps (6) that attach the center wing door (5) to the upper drag strut (3).

 S 034-005

 (2)  
Release the clamps (9) that attach the hydraulic lines and the electrical harness to the upper drag strut (3).

 (3)  
Remove the lower attach bolt (13).

 (4)
Let the upper drag strut hang from the upper attach bolt (4).

 (5)  
Hold the upper drag strut.

 (6)  
Remove the upper attach bolt (2).

 (7)  
Remove the upper drag strut from the airplane.

 S 024-006
 S 024-007
 S 024-008
 S 024-009
 S 024-010
 EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú

 32-11-31
 ALL  ú ú 01 Page 401 ú Nov 12/00
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A 
737-300/400/500MAINTENANCE MANUAL 
SEE  B 
SEE  C 
SEE  A 
SEE  D 
6. DOOR
 CLAMP 
5. CENTER
 WING
 DOOR 

FWD INBD
3. UPPER DRAG STRUT  4. UPPER ATTACHMENT
A
2. UPPER ATTACHMENT BOLT
B
Main Gear Upper Drag Strut Installation Figure 401 (Sheet 1)
1. TRUNNION LINK
FWD
INBD
3. UPPER DRAG STRUT
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú

 32-11-31
 ALL  ú ú 01 Page 402 ú Feb 20/84
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A 737-300/400/500MAINTENANCE MANUAL
3. UPPER DRAG STRUT
ELECTRICAL
HYDRAULIC
HARNESS

LINES
9. HYDRAULIC LINES AND ELECTRICAL HARNESS CLAMPS
FWD INBD
C
3. UPPER DRAG STRUT
10.
 LOWER DRAG STRUT

11.
 SIDE STRUT UNIVERSAL

FWD INBD
12.
 T-BOLT ASSEMBLY

13.
 LOWER ATTACHMENT BOLT

D
Main Gear Upper Drag Strut Installation
Figure 401 (Sheet 2)

EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú

 32-11-31
 ALL  ú ú 01 Page 403 ú Feb 20/84
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
737-300/400/500MAINTENANCE MANUAL
 S 844-011
 (8)  Make a yellow mark on the upper attachment bolt (2) to make sure that the bolt is installed in the same location.
 TASK 32-11-31-404-012
 3. Install the Upper Drag Strut (Fig. 401)
____________________________
 A. Consumable Materials
 (1)  
G01395 Compound - Corrosion Inhibiting, BMS 3-27, Mastinox 6856K

 (2)  
D00633 Grease - BMS 3-33

 (3)  
D00013 Grease - MIL-PRF-23827

 B.
　
中國航空網 www.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：737-300 400 500 AMM 飛機維護手冊 起落架 LANDING GEAR 1(82)