S 034-018

 (13)
 Remove the bolt.

 S 034-019

 (14)
 Put the lower drag strut with the T-bolt assembly in its position on the upper torsion link.

 S 024-020

 (15)
 Remove the T-bolt and the universal assembly.

 TASK 32-11-42-404-021
 3.  Install the T-Bolt Assembly (Fig. 401)___________________________
 A. Consumable Materials
 (1)
G01395 Compound - Corrosion Inhibiting, BMS 3-27, Mastinox 6856K

 B.
References

 (1)
7-11-11/201, Airplane Jacking

 EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú

 32-11-42
 ALL  ú ú 01 Page 402 ú Nov 15/92
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A 737-300/400/500MAINTENANCE MANUAL
 (2)  
20-50-11/201, Standard Torque Values

 C.
Access

 (1)  
Location Zone
 310 Left Main Landing Gear
 410 Right Main Landing Gear

 D.
Procedure

 S 624-053
 WARNING: USE NITRILE GLOVES FOR SKIN PROTECTION AGAINST BMS 3-27
_______ (MASTINOX 6856K). IF MASTINOX GETS ON YOUR SKIN, IMMEDIATELY REMOVE IT WITH WATER. IF THIS MATERIAL GETS IN YOUR EYES, IMMEDIATELY FLUSH YOUR EYES WITH WATER AND GET MEDICAL AID. THIS MATERIAL CONTAINS VERY POISONOUS AND FLAMMABLE AGENTS WHICH CAN CAUSE INJURIES TO PERSONS.
 CAUTION: REMOVE UNWANTED MASTINOX FROM SURFACES WHICH WILL BE
_______ LUBRICATED. IF YOU APPLY MASTINOX TO JOINTS THAT TURN, FAILURE OF THE LANDING GEAR TO EXTEND OR RETRACT COULD OCCUR.
 (1)  Apply a layer of Mastinox to the surfaces of the T-bolt bearing (Ref 12-21-11/301).
UPPER 
DRAG STRUT 
SHOCK STRUT 
UNIVERSAL 
ASSEMBLY 
T-BOLT 

LOWER DRAG
ANTI-ROTATION
STRUT LUG
Main Gear T-Bolt Installation Figure 401
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú

 32-11-42
 ALL  ú ú 01 Page 403 ú Nov 15/96
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A 737-300/400/500MAINTENANCE MANUAL
 (2)  S 824-024If it is necessary, adjust the axle jack to do the steps that follow.
 (3)  S 434-025Put the thrust washer on the T-bolt.and insert T-bolt through universal assembly.
 (4)  S 424-026Put the T-bolt through the universal assembly.
 (5)  S 424-027Put the T-bolt into the lower drag strut.
 (6)  S 824-028Move the lower drag strut up to align the T-bolt with the shock strut lugs.
 S 624-029

 WARNING: USE NITRILE GLOVES FOR SKIN PROTECTION AGAINST BMS 3-27
_______ (MASTINOX 6856K). IF MASTINOX GETS ON YOUR SKIN, IMMEDIATELY REMOVE IT WITH WATER. IF THIS MATERIAL GETS IN YOUR EYES, IMMEDIATELY FLUSH YOUR EYES WITH WATER AND GET MEDICAL AID. THIS MATERIAL CONTAINS VERY POISONOUS AND FLAMMABLE AGENTS WHICH CAN CAUSE INJURIES TO PERSONS.
 CAUTION: REMOVE UNWANTED MASTINOX FROM SURFACES WHICH WILL BE
_______ LUBRICATED. IF YOU APPLY MASTINOX TO JOINTS THAT TURN, FAILURE OF THE LANDING GEAR TO EXTEND OR RETRACT COULD OCCUR.
 (7)  
Apply a layer of compound to the washer, the bolt shank, and the threads (Ref 12-21-11/301).

 S 434-031

 (8)  
With the head inboard, install the bolt through the shock strut lugs and the T-bolt.

 S 434-032

 (9)  
Put the support rod fitting from the door support of the shock strut on the bolt.

 EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú

 32-11-42
 ALL  ú ú 01 Page 404 ú Nov 15/96
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
737-300/400/500MAINTENANCE MANUAL
 S 434-033
 (10)
 Add the nut.

 S 974-052

 (11)
 Do a check on the initial torque of the nut (Ref 20-50-11/201).