27-11-05
ALL ú ú 01 Page 602 ú Jun 10/90
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
747-400
MAINTENANCE MANUAL
HOUSING/BEARING
A-A
INDEX NO. PART NAME DIM. DESIGN LIMITS WEAR LIMITS PART WORN REPLACE REPAIR WORN PART REPAIR INSTR.
DIAMETER MITTED PER-WEAR DIM. DIAM CLEAR-ANCE MAX
MIN MAX
LOWER BEARING ID 1.9373 1.9379 1.941 X
HOUSING
1 0.0055
BEARING OD 1.9370 1.9375 X
2 FORK WTH 0.3194 0.3208 0.3249 0.0060 X
CONTROL COLUMN THK 0.3188 0.3193 0.3160 X
PLATE
Aileron Control Load Limiter Wear Limits
Figure 601 (Sheet 2)
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
27-11-05
ALL ú ú 01 Page 603 ú Jun 10/90
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
747-400 MAINTENANCE MANUAL
AILERON TRIM ACTUATOR AND TRIM AND FEEL MECHANISM - MAINTENANCE PRACTICES
_________________________________________________________________________
1. General_______
A. There are six tasks in this procedure. These are the tasks:
(1)
The removal of the aileron trim system
(2)
The installation of the aileron trim system
(3)
The removal of the aileron trim and feel mechanism
(4)
The installation of the aileron trim and feel mechanism
(5)
The test of the aileron trim and feel mechanism
(6)
The inspection/check of the aileron trim actuator and the trim and feel mechanism.
B.
The aileron trim and feel mechanism gives an alternative feel at the aileron control wheels. It also supplies center and trim of the lateral control system. The mechanism receives its input from the left body control cables. It then supplies an output which operates the central lateral control packages.
TASK 27-11-06-002-001
2. Aileron Trim Actuator Removal_____________________________
A. Special Tools and Equipment
(1)
G12001-50 Rig Pin Kit
(2)
MIT65B04001-41 Control Wheel Straightedge
(3)
4MIT65B80307-1 Protractor (Recommended)
(4)
F52485-500 Protractor (Optional)
(5)
3MIT65B80307-1 Control Wheel Adapter
B.
References
(1)
06-09-08/201, Wing Access Doors and Panels
(2)
24-22-00/201, Manual Control
(3)
29-11-00/201, Main Hydraulic Supply System
(4)
32-00-30/201, Landing Gear Door Locks
(5)
IPC 27-11-06 Fig. 2
(6)
SSM 27-11-01
(7)
WDM 27-11-11
C.
Access
(1)
Location Zone
135 Wing Landing Gear Well, LH
136 Wing Landing Gear Well, RH
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
27-11-06
ALL ú ú 03 Page 201 ú Jun 10/95
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
747-400
MAINTENANCE MANUAL
SEE A
RIGPIN A/S-2
SEE B
A
Aileron Trim Actuator and Trim and Feel Mechanism Installation
Figure 201 (Sheet 1)
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
27-11-06
ALL ú ú 01 Page 202 ú Jun 10/90
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
747-400
MAINTENANCE MANUAL
31. CABLE AA ROLLER FEEL SPRINGS CENTERING AND
1. AILERON TRIM AND NUT 1
中國航空網 www.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：747-400 AMM 飛機維護手冊 飛行操縱 FLIGHT CONTROLS 1(100)
