BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
747-400 MAINTENANCE MANUAL
D. Prepare for Removal
S 492-002
(1) Make sure the ground locks are installed on the landing gear.
S 492-003
WARNING: YOU MUST CAREFULLY DO THE STEPS IN THE TASK BELOW TO INSTALL
_______ THE DOOR LOCKS ON THE LANDING GEAR DOORS. THE DOORS CAN CLOSE QUICKLY IF YOU DO NOT INSTALL THE DOOR LOCKS CORRECTLY. THIS CAN CAUSE INJURY TO PERSONS OR DAMAGE TO EQUIPMENT.
(2)
Do this task: "Installation of the Door Locks on the Wing Landing Gear" (Ref 32-00-30/201).
S 862-042
(3)
Do this task to pressurize hydraulic systems No. 1 and 4 or 2 and 3: "Hydraulic System Pressurization" (Ref 29-11-00/201).
S 862-005
(4)
Do this task: "Supply Electrical Power" (Ref 24-22-00/201).
S 982-006
(5)
Manually move the captain's and the first officer's control wheels to the neutral position.
S 482-007
(6)
Install rig pin A/S-2.
NOTE: Rig pin A/S-2 must stay in its hole to keep the trim system
____ at the center for the subsequent adjustment.
(a) Make sure rig pin A/S-2 moves freely in its hole.
1) If it is necessary, operate the trim switches and move the control wheel until you can easily install rig pin A/S-2 (Fig. 201).
S 492-008
(7) With a clamp, attach the straightedge across the thumbrests on the captain's and first officer's control wheels.
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
27-11-10
ALL ú ú 03 Page 206 ú Feb 10/91
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
747-400 MAINTENANCE MANUAL
S 862-009
(8)
Do this task: "Electrical Power Removal" (Ref 24-22-00/201).
S 862-010
(9)
Do this task: Hydraulic System Depressurization"
(Ref 29-11-00/201).
E.
Procedure
S 022-011
(1)
Remove the aileron programmer (Fig. 201):
(a)
Remove the clip locks on the turnbuckles.
(b)
Disconnect the turnbuckles on wing cables AA (12) and AB (13).
(c)
Attach tags to identify the disconnected cable ends.
(d)
Remove the cables (12 and 13) from the programmer cable quadrants (1).
(e)
Remove the bolt (3) that connects the control rod (2 and 5) of the central lateral control package (CLCP) to the programmer input crank.
(f)
Disconnect the force limiter rod (15) between the aileron programmers (14 and 21) from the programmer to be removed.
(g)
If you remove the right aileron programmer (14), disconnect the back drive load limiter rod (11).
(h)
Remove the bolt (16) that connects the support rods (20) from the lower inboard side of the programmer.
(i)
To remove the programmer (14 and 21), remove the bolts (22, 25, 27, and 30) that attach the programmer (14 and 21) to the rigging beam of the wheel well.
TASK 27-11-10-402-012
3. Aileron Programmer Installation_______________________________
A. Special Tools and Equipment
(1)
G12001-50 Rig Pin Kit
(2)
MIT65B04001-41 Control Wheel Straightedge
(3)
4MIT65B80307-1 Protractor (Recommended)
(4)
F52485-500 Protractor (Optional)
(5)
3MIT65B80307-1 Control Wheel Adapter
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
27-11-10
ALL ú ú 03 Page 207 ú Jun 10/95
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
747-400
MAINTENANCE MANUAL
B. Parts ~.............................................................................. | AMM | | AIPC | ................. ............................ | FIG | ITEM | NOMENCLATURE | SUBJECT | FIG | ITEM | ................................................................................ | 201 | 3 | Bolt | 27-11-08 | 01 | 75 | | | 4 | Collar | | | 80 | | | 6 | Bolt | 27-11-55 | 01 | 105 | | | 7 | Washer | | | 110 | | | 8 | Bushing | | | 125 | | | 9 | Nut | | | 115 | | | 10 | Cotter Pin | | | 120 | | | 11 | Back Drive Load Limiter Rod | | | 135 | | | 14 | Aileron Programmer (RH) | 27-11-08 | 01 | 525 | | | 15 | Force Limiter Rod | 27-11-55 | 01 | 130 | | | 16 | Bolt | 27-11-08 | 01 | 150 | | | 17 | Washer | | | 155 | | | 18 | Nut | | | 160 | | | 19 | Bushing | | | 165 | | | 21 | Aileron Programmer (LH) | 27-11-08 | 01 | 520 | | | 22 | Bolt (FWD) | 27-11-10 | 01 | 10 | | | 22 | Bolt (AFT) | | | 20 | | | 23 | Washer | | | 30 | | | 24 | Nut | | | 40 | | | 25 | Bolt (FWD) | | | 15 | | | 25 | Bolt (AFT) | | | 25 | | | 26 | Washer (FWD) | | | 30 | | | 26 | Washer (AFT) | | | 35 | | | 27 | Bolt | | | 55 | | | 28 | Washer | | | 60 | | | 29 | Nut | | | 65 | | | 30 | Bolt (FWD) | | | 45 | | | 30 | Bolt (AFT) | | | 50 | | | 31 | Washer | | | 60 | | | 32 | Nut | | | 65 | | | 37 | Bolt | 27-11-55 | 01 | 105 | | | 38 | Washer | | | 110 | | | 39 | Bushing | | | 125 | | | 40 | Nut | | | 115 | | | 41 | Pin | | | 120 | 2......…........…...................................…...........….....…........1 中國航空網 www.k6050.com 航空翻譯 www.aviation.cn 本文鏈接地址：747-400 AMM 飛機維護手冊 飛行操縱 FLIGHT CONTROLS 1(124)
