A. Functional Description
 (1)  
As the control wheel, control column, or rudder pedals are moved, the movement is transferred to the shaft of the corresponding position transmitter. The transmitter electrical output varies with shaft position. The output signal passes the the column/rudder pedal position digitizer which processes the signals and routes them to the EIU's for display on EICAS and for the flight data recorder.

 (2)  
As the speed brake control lever is moved, the movement is transferred to the shaft of the speed brake lever position transmitter. The transmitter electrical output varies with lever position. The output signal passes to the three flight control computers which process the signal for the autopilot and for transmission to the flight data recorder via the EIU's.

 B.
Control

 (1)  
Operation of control wheel, control column, rudder pedal, and speed brake lever position indication is automatic. No control functions are exercised.

 EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú

 27-08-00
 ALL  ú ú 01 Page 6 ú Jun 10/89
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
747-400 MAINTENANCE MANUAL
 CONTROL WHEEL POSITION TRANSMITTER ASSEMBLY - REMOVAL/INSTALLATION
__________________________________________________________________
 1.  General_______
 A.  This procedure has two tasks, one for the removal and one for the installation of the control wheel position transmitter assembly (which is referred to as the "transmitter assembly"). The procedure has these parts:
 (1)  
The removal of the transmitter assembly

 (2)  
The installation of the transmitter assembly

 (3)  
An adjustment of the transmitter assembly

 (4)  
An operational test of the transmitter assembly.

 TASK 27-08-01-004-002
 2.  Control Wheel Position Transmitter Assembly Removal (Fig. 401)___________________________________________________
 A.  References
 (1)  
AMM 25-59-01/401, Main Deck Compartment Cargo Lining Panel

 (2)  
AIPC 27-18-51, Fig. 1

 (3)  
SSM 27-09-05

 (4)  
WDM 27-09-31

 (5)  
WDM 20-90-11

 B.  
Access

 (1)  
Location Zone
 211 Passenger Cabin - Nose to First Door, LH

 C.  
Procedure

 S 864-001
 (1)  
Open these circuit breakers and attach DO-NOT-CLOSE tags:

 (a)  
P6, Main Power Distribution Panel
 1) 6J22, COL/RUD PEDAL SENSOR
 2) 6J23, COL/RUD PEDAL IND

 S 014-221
 (2)  
Remove the ceiling lining panel on the left side at station 290 (AMM 25-59-01/401).

 S 024-230

 (3)  
Remove the position transmitter (Fig. 401):

 (a)  
Remove the wire clamp from the transmitter.

 EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú

 27-08-01
 ALL  ú ú 08 Page 401 ú Feb 18/02
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A

747-400
MAINTENANCE MANUAL

CAPTAIN'S 
POSITION  FIRST OFFICER'S 
TRANSMITTER  POSITION 
SEE  B  TRANSMITTER 
SEE  A 

CONTROL WHEEL
POSITION
TRANSMITTER

SEE C
FIRST OFFICER'S POSITION TRANSMITTER A
CONTROL WHEEL POSITION TRANSMITTER
SEE C
CAPTAIN'S POSITION TRANSMITTER B
Control Wheel Position Transmitter Assembly Installation Figure 401 (Sheet 1)
M27108
 EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú

 27-08-01
 ALL  ú ú 20 Page 402 ú Oct 18/01
　
中國航空網 www.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：747-400 AMM 飛機維護手冊 飛行操縱 FLIGHT CONTROLS 1(29)