27-21-01
ALL ú ú 01 Page 407 ú Jun 10/91
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
747-400
MAINTENANCE MANUAL
47.
46. THREADED BUSHING
48. BEARING ASSEMBLY ON THE VERTICAL FIN
11. LOWER RUDDER
LOWER RUDDER
42. NUT
HINGE NO. 3
Lower Rudder Power Control Package and Position Transmitter
Figure 402 (Sheet 3)
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
27-21-01
ALL ú ú 01 Page 408 ú Jun 10/91
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
747-400 MAINTENANCE MANUAL
S 034-021
(5) Pull the sling up (with the crane) to hold the weight of the lower rudder.
NOTE: The lower rudder weighs approximately 310 pounds.
____
S 034-022
(6)
Remove the bolt (32) to disconnect the control rod of the position transmitter from the lower rudder.
S 494-023
(7)
Hold the control rod in a position that is clear of the rudder.
S 024-024
(8)
Do these steps to remove the lower rudder from the airplane.
(a)
Disconnect the bonding jumpers (47) at hinges No. 1, 2, 3 and 4 from the front spar of the rudder.
(b)
Remove the lockbolt (40) and the nut (43) at hinge No. 2.
(c)
At hinge No. 2, loosen the threaded bushings (46, 36) until their ends are fully retracted.
(d)
Remove the pin (35) from hinge No. 2.
(e)
Remove the lockbolt (40) and the nut (43) at hinge No. 3.
(f)
At hinge No. 3, loosen the threaded bushing (46) until its end is fully retracted.
(g)
Remove the pin (49) from hinge No. 3.
(h)
Remove the nuts (3) and the bolts (1) from hinges No. 1 and 4.
(i)
Move the lower rudder (11) left (with your hand) until it is clear of the airplane.
(j)
When you put the rudder on the ground, do these steps: 1) Put the bottom edge of the rudder on a soft material. 2) Put the rudder on its side.
TASK 27-21-01-404-131
3. Lower Rudder Installation (Fig. 402)_________________________
A. Special Tools and Equipment
(1) ST2580-267 Spanner Wrench Adapter Set
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
27-21-01
ALL ú ú 01 Page 409 ú Feb 10/95
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
747-400
MAINTENANCE MANUAL
(2)
G27010-1 Lower Rudder Sling Assembly
B.
Standard Tools and Equipment
(1)
Crane
(2)
Load Positioner (For 310 Pounds minimum), 3734T51, McMaster-Carr
P.O. Box 54960, Los Angeles, California 90054 (We recomend this tool, but it is optional)
(3)
Bonding Meter
(4)
Feeler Gauge
C.
Consumable Materials
(1)
D00633 Grease - BMS 3-33 (Preffered).
(2)
D00013 Grease - MIL-G-23827 (Optional).
(3)
A00181 Adhesive - BMS 5-92
(4)
A00247 Sealant - BMS 5-95
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
中國航空網 www.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：747-400 AMM 飛機維護手冊 飛行操縱 FLIGHT CONTROLS 2(67)
