EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú

 27-21-01
 ALL  ú ú 06 Page 429 ú Jun 18/01
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
747-400 MAINTENANCE MANUAL
 ~.............................................................................. | MM | | IPC | ................. ...........................| | FIG | ITEM | NOMENCLATURE | SUBJECT | FIG | ITEM | ...............................................................................| | 404 | 35 | Washer | 27-28-01 | 1 | 85 | | | 36 | Nut | | | 90 | | | 37 | Washer | 27-21-01 | 2 | 125 | | | 38 | Bolt | | | 120 | | | 39 | Bushing | | | 140 | | | 40 | Bolt | | | 20 | | | 41 | Washer | | | 25 | | | 42 | Nut | | | 30 | | | 44 | Nut | | | 135 | | | 45 | Cotter Pin | | | 115 | | | 46 | Washer | | | 130 | | | 48 | Pin | | | 165 | | | 49 | Pin | | | 160 | | | 50 | Lug - Anti-Rotation | | | 170 | | | 52 | Bushing - Threaded | | | 142 | | | 53 | Washer | | | 150 | | | 54 | Washer | | | 145 | | | 55 | Nut | | | 135 | | | 56 | Cotter Pin | | | 115 | | | 57 | Nut | | | 75 | | | 58 | Washer | | | 70 | | | 59 | Lockbolt | | | 65 | | | 60 | Nut | | | 90 | | | 61 | Washer | | | 85 | | | 62 | Washer | | | 80 | | | 63 | Washer | | | 155 | | | 64 | Pin | | | 175 | | | 65 | Pin | | | 180 | | | 66 | Lug - Anti-Rotation | | | 185 | | | 68 | Bushing | | | 110 | | | | | | | | 2......…........…...................................…...........….....…........1
 E. References
 (1)
12-21-17/301, Rudder and Rudder Trim Control System

 F.
Access

 (1)  
Location Zone
 326 Rudder, Upper

 EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú

 27-21-01
 ALL  ú ú 01 Page 430 ú Jun 18/99
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
747-400
MAINTENANCE MANUAL

 (2)  
Access Panel
 324FL Inspection Access Panel
 324GL Inspection Access Panel
 324HL Inspection Access Panel
 324KL Inspection Access Panel
 324LL Inspection Access Panel
 324ML Inspection Access Panel
 324UL Inspection Access Panel

 G.
Prepare to Install the Upper Rudder

 S 224-059
 (1)  
If you will install a used bolt, sleeve bushing, or bearing, make sure it is not worn too much.

 S 214-060

 (2)  
Make sure the seals for the rudder are in good condition (Fig. 403).

 S 494-061

 (3)  
Attach the sling assembly to the upper rudder.

 S 284-062

 (4)  
Make sure the threaded bushings (52) of hinges No. 7 and 8 are fully retracted (Fig. 404).

 S 494-119

 (5)  
Attach the sling assembly to the crane.

 NOTE: We recommend that you use a load positioner (also called a
____ Zero G device) to let you manually move the upper rudder.
 H. Procedure
 S 424-136
 WARNING: MAKE SURE PERSONS AND EQUIPMENT ARE CLEAR BELOW THE RUDDERS.
_______ OBJECTS CAN FALL AND CAUSE INJURY TO PERSONS AND DAMAGE TO EQUIPMENT.
 (1)  
Do these steps to attach the upper rudder to the airplane.

 (a)  
Lift the upper rudder to its position.

 (b)  
Align the upper rudder with the hinges.

 (c)  
Apply a thin layer of grease to the pins (48, 49, 64, 65).

 (d)  
Install the pins (48, 49), and the antirotation lug (50) at hinge No. 7.

 (e)  
Install the bushing (68) in hinge No. 8.

 (f)  
Install the pins (64, 65), and the antirotation lug (66) at hinge No. 8.

 (g)  
Apply a thin layer of grease to the bolts (38) and (1).

 (h)  
Install the bushings (39), the washer (37), and the bolt (38) in hinge No. 6.

 EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú

 27-21-01
 ALL  ú ú 03 Page 431 ú Feb 18/01
　
中國航空網 www.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：747-400 AMM 飛機維護手冊 飛行操縱 FLIGHT CONTROLS 2(74)