(3)  
AMM 32-11-09/601, Wing Gear Jury Strut Spindle

 (4)  
AMM 32-00-30/201, Landing Gear Door Locks

 (5)  
AIPC 32-11-09 Fig. 1

 D.
Access

 (1)  
Location Zone
 735 Wing Landing Gear, LH
 745 Wing Landing Gear, RH

 E.
Prepare for the Installation

 S 224-014
 (1)  
Examine the structural attach points for worn areas
 (AMM 32-11-09/601).

 F.
Procedure

 S 644-015
 (1)
Lubricate the spindle shank, the nut and the washer with grease.

 S 494-016

 (2)  
Install the spindle thread protector.

 S 424-017
 CAUTION: DO NOT PERMIT THE END OF THE SPINDLE TO PUT PRESSURE ON THE
_______ OUTER CYLINDER WHEN YOU TIGHTEN THE SPINDLE. THIS WILL CAUSE DAMAGE TO THE SPINDLE OR TO THE SHOCK STRUT.
 (3)  
Install the spindle in the attachment fitting for the shock strut.

 S 094-018

 (4)  
Remove the thread protector.

 S 434-019

 (5)  
Install the washer and the nut.

 (a)  
Tighten the nut 96 to 144 pound-inches to install the spindle.

 NOTE: Loosen the nut to be at zero torque and then tighten
____ the nut to 12 - 24 pound-inches again. Loosen the nut to the nearest castellation and install the cotter pin.
 EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú

 32-11-09
 ALL  ú ú 01 Page 404 ú Oct 18/99
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
747-400 MAINTENANCE MANUAL
 S 644-020
 (6)  Lubricate the spindle bolt and the nut with grease.
 S 434-021
 (7)  Align the upper jury strut with the hole in the spindle.
 (a)  Install the bolt (use the thread protector), the conduit
 support bracket, and the castellated nut.
 (b)  Tighten the nut 96 to 144 pound-inches.
 NOTE:____ Loosen the nut to be at zero torque and tighten the nut
 to 12 - 24 pound-inches again.  Loosen the nut to the
 nearest castellation and install the cotter pin.

 S 864-022
 (8)  
Put the weight of the airplane back to the gear (AMM 07-11-01/201).

 S 094-023

 (9)  
Remove the bungee restraining tool from the jury strut downlock.

 S 094-028
 WARNING: YOU MUST CAREFULLY DO THE STEPS IN THE TASK BELOW TO REMOVE THE
_______ DOOR LOCKS FROM THE LANDING GEAR DOORS. THE DOORS CAN CLOSE QUICKLY IF YOU DO NOT REMOVE THE DOOR LOCKS CORRECTLY. THIS CAN CAUSE INJURY TO PERSONS OR DAMAGE TO EQUIPMENT.
 (10)
 Do this task:  "Removal of the Door Locks on the Wing Landing Gear" (AMM 32-00-30/201).

 S 094-029

 (11)
 Do this task:  "Removal of the Door Locks on the Body Landing Gear" (AMM 32-00-30/201).

 EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú

 32-11-09
 ALL  ú ú 01 Page 405 ú Oct 18/99
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A