(2)
The installation of the actuator for the body landing gear.
B.
To remove the actuator these operations are necessary:
(1)
Disconnect the hydraulic hoses from the actuator.
(2)
Install the actuator sling assembly.
(3)
Remove the actuator.
C.
To install the actuator these operations are necessary:
(1)
Connect the head end of the actuator.
(2)
Fill the actuator with the hydraulic fluid.
(3)
Install the hydraulic hoses.
(4)
Connect the rod end of the actuator.
TASK 32-33-01-004-001
2. Body Landing Gear Actuator Removal__________________________________
A. Special Tools and Equipment
(1)
20HME65B00163-1 - Sling Assembly, Body Gear Retract Actuator
(2)
ST2580-245 - Crow-Foot Torque Wrench Adapters, 3.0 inches across flats
(3)
4PRE65B00163-1 - Thread Protector, Body Gear Actuator Boss
B.
Standard Tools and Equipment
(1)
Portable Hoist - 200-pound capacity
C.
References
(1)
AMM 09-11-00/201, Towing
(2)
AMM 12-21-01/301, Landing Gear
(3)
AMM 29-11-00/201, Hydraulic Supply System
(4)
AMM 32-00-30/201, Landing Gear Door Locks
(5)
AIPC 32-13-02, Fig. 2
(6)
AIPC 32-33-01, Fig. 1
(7)
AIPC 32-53-11, Fig. 5
D.
Access
(1)
Location Zones
755 Body Landing Gear, LH
765 Body Landing Gear, RH
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
32-33-01
ALL ú ú 01 Page 401 ú Oct 18/99
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
747-400 MAINTENANCE MANUAL
E. Prepare for the Removal
S 494-002 WARNING: YOU MUST CAREFULLY INSTALL THE GROUND LOCKS IN ALL LANDING
_______ GEAR. AN ACCIDENTAL RETRACTION OF THE LANDING GEAR CAN CAUSE INJURY TO PERSONS AND DAMAGE TO EQUIPMENT.
(1) Install the ground locks in all landing gear (AMM 09-11-00/201).
S 494-004 WARNING: YOU MUST CAREFULLY DO THE STEPS IN THE TASKS BELOW TO INSTALL
_______ THE DOOR LOCKS ON THE LANDING GEAR DOORS. THE DOORS CAN CLOSE QUICKLY IF YOU DO NOT INSTALL THE DOOR LOCKS CORRECTLY. THIS CAN CAUSE INJURY TO PERSONS AND DAMAGE TO EQUIPMENT.
(2)
Do this task: "Body Landing Gear Door Lock Installation"
(AMM 32-00-30/201).
S 494-022
(3)
Do this task: "Wing Landing Gear Door Lock Installation"
(AMM 32-00-30/201).
S 864-005
(4)
Remove the pressure from hydraulic system No. 1 (AMM 29-11-00/201). S 034-006
(5)
Disconnect the hydraulic hoses from the actuator.
S 034-032
(6)
Install the caps on the hoses.
S 494-007 WARNING: YOU MUST USE THE SLING AND THE HOIST WHEN YOU MOVE THE
_______ ACTUATOR. THE ACTUATOR WEIGHS APPROXIMATELY 136 POUNDS AFTER YOU FILL IT WITH HYDRAULIC FLUID. IF THE ACTUATOR FALLS, IT CAN CAUSE INJURY TO PERSONS AND DAMAGE TO EQUIPMENT.
(7) Install the sling assembly on the actuator.
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
32-33-01
ALL ú ú 01 Page 402 ú Oct 18/99
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
747-400 MAINTENANCE MANUAL
S 864-031
(8)
Use the portable hoist to remove the load to lift the actuator.
F. 中國航空網(wǎng) www.k6050.com 航空翻譯 www.aviation.cn 本文鏈接地址：747-400 AMM 飛機維護(hù)手冊 起落架 LANDING GEAR 4(122)
