(2)  
AMM 29-11-00/201, Main Hydraulic Supply System

 (3)  
AMM 32-00-30/201, Landing Gear Door Locks

 (4)  
AMM 32-32-06/401, Wing Gear Uplock-Operated Sequence Valve and Mechanism

 (5)  
AMM 32-32-14/401, Wing Gear Uplock Actuator

 (6)  
AMM 32-61-21/201, Wing Gear Uplock Sensors

 (7)  
AIPC 32-32-08, Fig. 1

 C.
Access

 (1)  
Location Zone
 135 Wing Landing Gear Well, LH
 136 Wing Landing Gear Well, RH

 D.
Prepare for the Removal

 EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú

 32-32-08
 ALL  ú ú 01 Page 401 ú Jun 18/01
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
747-400
MAINTENANCE MANUAL

 S 494-034
 WARNING: YOU MUST CAREFULLY INSTALL THE GROUND LOCKS IN ALL LANDING
_______ GEAR. AN ACCIDENTAL RETRACTION OF THE LANDING GEAR CAN CAUSE INJURY TO PERSONS AND DAMAGE TO EQUIPMENT.
 (1) Install the ground locks in all landing gear (AMM 09-11-00/201).
 S 494-032
 WARNING: YOU MUST CAREFULLY DO THE STEPS IN THE TASKS BELOW TO INSTALL
_______ THE DOOR LOCKS ON THE LANDING GEAR DOORS. THE DOORS CAN CLOSE QUICKLY IF YOU DO NOT INSTALL THE DOOR LOCKS CORRECTLY. THIS CAN CAUSE INJURY TO PERSONS AND DAMAGE TO EQUIPMENT.
 (2)  
Do this task: "Wing Landing Gear Door Lock Installation"
 (AMM 32-00-30/201).

 S 494-033

 (3)  
Do this task: "Body Landing Gear Door Lock Installation"
 (AMM 32-00-30/201).

 S 864-004

 (4)  
Remove the pressure from hydraulic system No. 4 (AMM 29-11-00/201).

 S 864-005

 (5)  
Open these circuit breakers and attach DO-NOT-CLOSE tags:

 (a)  
P6, Main Power Distribution Panel
 1) 6C29, ALT LG EXT WING L
 2) 6C30, ALT LG EXT WING R

 E.
Remove the Uplock Mechanism.

 S 034-006
 (1)  Disconnect the two ends of the uplock actuator (AMM 32-32-14/401) (Fig. 401).
 NOTE: It is not necessary to fully remove the uplock actuator when
____ you remove the uplock mechanism. Keep the uplock actuator hoses connected if it is not necessary to remove the actuator.
 (a)  Hold the actuator away from the uplock mechanism.
 S 034-007
 (2) Disconnect the lower end of the actuator rod that operates the uplock-operated sequence valve, from the uplock mechanism.
 EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú

 32-32-08
 ALL  ú ú 01 Page 402 ú Jun 18/01
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
747-400
MAINTENANCE MANUAL

A
A
UPLOCK ACTUATOR
SEE A
ACTUATOR ROD FOR
THE SEQUENCE VALVE

SEE B
A
UPLOCK SUPPORT ASSEMBLY (STRUCTURE) LINK
UPLOCK ATTACH SELF-LOCKING BOLT NUT
BOLT
B
PLAIN
WASHER COUNTERSUNK WASHER
UPLOCK FRAME HYDRAULIC CLEVIS TUBE SUPPORT A-A
Wing Landing Gear Uplock Mechanism InstallationFigure 401
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú

 32-32-08
 ALL  ú ú 01 Page 403 ú Feb 10/91
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
747-400
MAINTENANCE MANUAL

RUBBER SLEEVE
(1/2 INCH ID X 1/8 INCH THK)

_______DO NOT USE THIS TOOL IF THE RUBBER SLEEVE IS DAMAGED.
CAUTION: IT CAN CAUSE DAMAGE TO THE UPLOCK DRIVE MECHANISM. EXAMINE THE SLEEVE FOR DAMAGE BEFORE AND AFTER USE. INSTALL A NEW SLEEVE IF IT IS DAMAGED.
ACTUATING TOOL

LOCK CLOSED

Uplock Actuating Tool
Figure 402 (Sheet 1)

EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
　
中國航空網 www.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：747-400 AMM 飛機維護手冊 起落架 LANDING GEAR 4(83)