NOTE: Approximately 200 turns to fully open the cam from the
____
 fully closed position.

 EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú

 52-31-09
 ALL  ú ú 02 Page 501 ú Jun 10/95
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
747-400 MAINTENANCE MANUAL
 S 715-015
 (3)  Make sure the nose cargo door push-pull cam mechanism manual drive operates correctly.
 NOTE: Do not exceed 96 in-lbs manual input torque.
____
 S 865-017
 (4)  
Simultaneously hold the control switches until the nose cargo door lift system opens the door a minimum of 3 feet.

 S 865-007

 (5)  
Simultaneously hold the control switches until the nose cargo door lift system is closed.

 S 985-008

 (6)  
Manually drive the push-pull cam actuator to move the cam to the fully closed position.

 NOTE: Approximately 200 turns to fully close the cam from the fully
____
 open position.

 S 715-014
 (7)  Make sure the nose cargo door push-pull cam mechanism manual drive operates correctly.
 NOTE: Do not exceed 96 in-lbs manual input torque.
____
 S 865-009
 (8)  
Simultaneously hold the control switches until the latches are fully closed.

 S 865-010

 (9)
Remove the DO-NOT-CLOSE tags and close these circuit breakers:

 (a)  
On the Nose Cargo Door Power Panel H122:
 1) PULL UP CAM

 F.
Put the Airplane Back To Its Usual Condition

 (1)  
Make sure the door is fully closed, latched and locked.

 (2)  
Remove the electrical power, if it is not necessary.

 S 865-011
 S 865-012
 EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú

 52-31-09
 ALL  ú ú 02 Page 502 ú Jun 10/95
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
747-400 MAINTENANCE MANUAL
 S 095-013
 (3) Remove the safety barrier across the door opening.
 EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú

 52-31-09
 ALL  ú ú 02 Page 503 ú Jun 10/95
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
747-400 MAINTENANCE MANUAL
 NOSE CARGO DOOR PUSH-PULL CAM FITTING - INSPECTION/CHECK
________________________________________________________
 1.  General
_______
 A.  This procedure only has illustration and data for the wear limits of the components on the push-pull cam fittings. For the removal, installation of the damaged component, refer to AMM 52-31-06/401.
 TASK 52-31-09-706-001
 2.  Examine the Nose Cargo Door Push-Pull Cam Fitting
__________________________________________________
 A.  Access
 (1)  
Location Zone
 112 Area Forward of Nose Gear Well

 (2)  
Access Panel
 801 Door - Nose Cargo

 B.  
Procedure

 S 226-002
 (1) See Figure 601.
 EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú

 52-31-09
 ALL  ú ú 02 Page 601 ú Feb 10/94
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A

747-400
MAINTENANCE MANUAL

SEE  A 
B  A  PUSH-PULL CAM C  CAM ROLLER 
CAM ACTUATOR  C A B 
B 
SUPPORT FITTING  B  CAM SUPPORT FITTING  FWD 
A 
Push-Pull Cam Mechanism Wear Limits Figure 601 (Sheet 1) 

B26926
 EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
　
中國航空網 www.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：747-400 AMM 飛機維護手冊 艙門 DOORS 2(57)