曝光臺 注意防騙 網曝天貓店富美金盛家居專營店坑蒙拐騙欺詐消費者

R  lbf.ft) and safety with a new cotter pin (9). 
R  (5) At the track 2 position: 
R  (a) TORQUE the nut (31) to between 7.6 and 8.5 m.daN (56.04 and 62.68 
R  lbf.ft) and safety with a new cotter-pin (30). 
R  (6) At tracks 1 and 2: 
R  (a) Apply STORAGE PRESERVATION (Material No. 15-007) to the bolts (6) 
R  and (33) and the nuts (8) and (31) after assembly. 
R  (7) Install the Flap Track 1 Actuator 6205CM(6255CM) (Ref. TASK 27-54-49-
R  400-001). 

R 1EFF : 159-199, 211-212, 1 27-54-55Page 450 1 1 Aug 01/05 1 1 1CES 1

R  Subtask 27-54-55-420-061-C 
R  C. Installation of the Flap-Actuator Lever Assembly - Track 2 
R  WARNING : USE SOLVENTS/CLEANING AGENTS, SEALANTS AND OTHER SPECIAL_______ 
R  MATERIALS ONLY WITH A GOOD SUPPLY OF AIR. 
R  OBEY THE MANUFACTURERS INSTRUCTIONS. 
R  PUT ON PROTECTIVE CLOTHING. 
R  DO NOT GET THEM IN YOUR MOUTH. 
R  DO NOT SMOKE. 
R  DO NOT BREATHE THE GAS. 
R  THESE MATERIALS ARE POISONOUS, FLAMMABLE AND SKIN IRRITANT. 
R  GET MEDICAL HELP IF YOUR SKIN OR EYES BECOME IRRITATED. 
R  (1) At the track 2 position: 
R  (Ref. Fig. 402/TASK 27-54-55-991-004) 
R  (a) Apply SEALANTS (Material No. 09-018) to the bolts (43). 
R  (b) Install the bolts (43) in the outboard bracket (36) with the bolt 
R  heads inboard. 
R  (c) Apply SEALANTS (Material No. 09-018) or SEALANTS (Material No. 
R  09-019) to the mating face of the anti-rotation plate (42). 
R  (d) Install the anti-rotation plate (42) on the bolts (43) and 
R  loosely install the nuts (41). 
R  (e) Apply SPECIAL MATERIALS (Material No. 05-064) to the holes of the 
R  bearing housings in the brackets (36). 
R  (f) Apply SEALANTS (Material No. 09-018) to the plain shank and 
R  flange of the bearing housing (34). 
R  (g) Install the bearing housing (34) in the outboard bracket (36) and 
R  tighten the nuts (41). 
R  (h) Apply COMMON GREASE (Material No. 04-022) to the ring nut (40). 
R  (i) Install the ring nut (40) on the bearing housing (34). 
R  (j) Torque the ring nut (40) with the SPANNER-FLAP LEVER TRACKS 2 AND 
R  3 (98D27504028000) to between 1.4 and 1.5 m.daN (10.32 and 11.06 
R  lbf.ft). 

　
中國航空網 www.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：A320飛機維護手冊 AMM FLIGHT CONTROLS 飛行操縱5(179)