(24)
 Apply SEALANTS (Material No. 09-018) to the installation surfaces of the stop plate (23).

 (25)
 Apply SPECIAL MATERIALS (Material No. 05-002) to the installation surfaces of the nuts (24) and (26) and the bolts (20) and (21).

 (26)
 Put the stop plate (23) in position at the end of the flap track beam (25).

 (27)
 Install the bolt (20), the washer (19) and the nut (26) at the end of the flap track beam (25).

 (28)
 Install the washers (22) and the bolts (21).

 (29)
 TORQUE the nut (26) to between 0.7 and 0.8 m.daN (61.94 and 70.79 lbf.in).

 (30)
 Apply SEALANTS (Material No. 09-018) to the gap between the flap track beam (25) and the stop plate (23).

 5. Close-up
________ Subtask 27-54-46-410-053
 A. Close Access
 (1) Make sure that the work area is clean and clear of tool(s) and other items.
 (2) Install the inboard flap (Ref. TASK 27-54-61-400-001). Subtask 27-54-46-865-059
 B. Remove the safety clip(s) and the tag(s) and close this(these) circuit breaker(s): 6CV, 8CV.
 Subtask 27-54-46-942-057
 C. Removal of Equipment
 (1)
 Remove the safety barriers.

 (2)
 Remove the warning notice(s).

R 1EFF : 001-049, 051-099, 101-149, 151-199, 1 27-54-46Page 458 1201-299, 401-499, 1Aug 01/05 1 1 1CES 1

 (3)
 Remove the access platform(s).

 (4)
 Remove the ground support and maintenance equipment, the special and standard tools and all other items.

R 1EFF : 001-049, 051-099, 101-149, 151-199, 1 27-54-46Page 459 1201-299, 401-499, 1Aug 01/05 1 1 1CES 1 CARRIAGE - INSPECTION/CHECK

___________________________
 TASK 27-54-46-200-001
 Detailed Visual Inspection of the Flap Tracks and Rollers (as far as is possible)
 WARNING : PUT THE SAFETY DEVICES AND THE WARNING NOTICES IN POSITION BEFORE YOU
_______ START A TASK ON OR NEAR:
 -
THE FLIGHT CONTROLS

 -
THE FLIGHT CONTROL SURFACES

 -
THE LANDING GEAR AND THE RELATED DOORS

 -COMPONENTS THAT MOVE.
 WARNING : MAKE SURE THAT THE GROUND SAFETY-LOCKS ARE IN POSITION ON THE LANDING
_______ GEAR.
 CAUTION : BE CAREFUL WHEN YOU DO MAINTENANCE TASKS ON THE WING TRAILING EDGE:
_______
 -
DO NOT CAUSE DAMAGE TO THE ELECTRICAL CABLE RACEWAYS.

 -
DO NOT CAUSE DAMAGE TO THE ELECTRICAL CABLE INSTALLATIONS.

 -MAKE SURE THAT THE ELECTRICAL CABLES ARE INSTALLED CORRECTLY. INCORRECT INSTALLATION CAN CAUSE DAMAGE.
 1. Reason for the Job
__________________
 Refer to the MPD TASK: 275446-02
 2. Job Set-up Information
______________________
 A. Fixtures, Tools, Test and Support Equipment
 -------------------------------------------------------------------------------REFERENCE QTY DESIGNATION -------------------------------------------------------------------------------
No specific circuit breaker(s) safety clip(s) No specific flashlight No specific mirror No specific safety barriers No specific warning notice No specific adjustable access platforms 3.5 m (11 ft. 6 in.)
 1EFF : ALL 1 27-54-46Page 601 1 1 May 01/02R 1 1 1CES 1

 B. Consumable Materials
 -------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
Material No. 11-026 GB DEF-STAN 68-148/1
 SOLVENT GENERAL PURPOSE (Ref. 20-31-00)
 Material No. 19-003 USA AMS 3819
 LINT-FREE COTTON CLOTH (Ref. 20-31-00)

 C. Referenced Information
 -------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
12-22-27-640-004 Lubrication of all Flap Track Carriage Rollers 27-50-00-866-008 Extension of the Flaps on the Ground 27-50-00-866-009 Retraction of the Flaps on the Ground 27-60-00-866-002 Extension-Retraction of the Spoilers for Maintenance 32-00-00-481-002 Installation of the Safety Devices on the Landing
 Gear Doors
 32-12-00-010-001 Open the Main Gear Doors for Access
 32-12-00-410-001 Close the Main Gear Doors after Access

 **ON A/C 001-049, 051-061, 101-103, 201-203,
 27-54-46-991-002 Fig. 601
R **ON A/C 062-099, 104-149, 151-199, 204-299, 401-499,
 27-54-46-991-002-A Fig. 601A
 **ON A/C 301-399,
 27-54-46-991-002-B Fig. 601B **ON A/C ALL

 3. Job Set-up
__________
　
中國航空網(wǎng) www.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：A320飛機維護手冊 AMM FLIGHT CONTROLS 飛行操縱5(80)