(b) If the access hole is in pocket 4, do the pendulum removal procedure in para 4.B.
4. Procedure
_________
(Ref. Fig. 403/TASK 27-54-46-991-004, 404/TASK 27-54-46-991-006)
CAUTION : BE CAREFUL WHEN YOU DO MAINTENANCE TASKS ON THE WING TRAILING
_______
EDGE:
-
DO NOT CAUSE DAMAGE TO THE ELECTRICAL CABLE RACEWAYS.
-
DO NOT CAUSE DAMAGE TO THE ELECTRICAL CABLE INSTALLATIONS.
-MAKE SURE THAT THE ELECTRICAL CABLES ARE INSTALLED CORRECTLY. INCORRECT INSTALLATION CAN CAUSE DAMAGE.
**ON A/C 001-049, 051-061, 101-103, 201-203,
Subtask 27-54-46-020-053
A. Removal of the Pendulum of the No.1 Flap Track Carriage
(Ref. Fig. 403/TASK 27-54-46-991-004)
WARNING : SUPPORT THE UNIT/ASSEMBLY OR IT WILL FALL AND BECOME DAMAGED OR
_______
INJURE PERSONNEL. THE UNIT/ASSEMBLY IS HEAVY.
(1)
Move the carriage (6) to get access to the bolt (18) through the access hole in pocket 5 of the flap track beam (19).
(2)
Loosen the bolt (18).
(3)
Remove the nut (11), the washer (12) and the lockplate (13) from the bottom of the carriage (6). Discard the lockplate (13).
(4)
Remove the bolt (18) through the access hole in pocket 5.
(5)
Remove the roller (14) and the washer (15) through the lower side of the flap track beam (19).
(6)
Remove the nut (10), the washer (9) and the lockplate (8) from the lower side of the carriage (6). Discard the lockplate (8).
(7)
Move the carriage as necessary and remove the bolt (1), the roller
(2) and the washer (3) from the top side of the carriage (6).
(8)
Remove the retaining ring (4) and the washer (5) from the bolt (17).
R 1EFF : 001-049, 051-099, 101-149, 151-199, 1 27-54-46Page 445 1201-299, 401-499, 1Aug 01/05 1 1 1CES 1
(9) Remove the bolt (17) and the lockplate (16) from the carriage (6) through the lower side of the flap track beam (19). Discard the lockplate (16).
(10) Remove the pendulum (7) from the carriage (6). R **ON A/C 062-099, 104-149, 151-199, 204-299, 401-499,
Subtask 27-54-46-020-053-A
A. Removal of the Pendulum of the No.1 Flap Track Carriage
(Ref. Fig. 405/TASK 27-54-46-991-007)
WARNING : SUPPORT THE UNIT/ASSEMBLY OR IT WILL FALL AND BECOME DAMAGED OR
_______ INJURE PERSONNEL. THE UNIT/ASSEMBLY IS HEAVY.
(1)
Move the carriage (6) to get access to the bolt assembly (1) through the access hole in the flap track beam (18).
(2)
Loosen the bolt assembly (1).
(3)
Remove the nut (9), the washer (8) and the lockplate (7) from the bottom of the carriage (6). Discard the lockplate (7).
(4)
Remove the bolt assembly (1) through the access hole.
(5)
Remove the roller (4) and the washer (5) through the lower side of the flap track beam (18).
(6)
Remove the nut (11), the washer (12) and the lockplate (13) from the lower side of the carriage (6). Discard the lockplate (13).
(7)
Move the carriage as necessary and remove the bolt assembly (19) through the access hole.
(8)
Remove the roller (14) and the washer (15) through the lower side of the flap track beam (18).
(9)
Remove the retaining ring (3) and the washer (2) from the bolt (16).
(10)
Remove the bolt (16) and the lockplate (17) from the carriage (6) through the lower side of the flap track beam (18). Discard the lockplate (17).
(11)
Remove the pendulum (10) from the carriage (6).
R 1EFF : 001-049, 051-099, 101-149, 151-199, 1 27-54-46Page 446 1201-299, 401-499, 1Aug 01/05 1 1 1CES 1R **ON A/C 001-049, 051-099, 101-149, 151-199, 201-299, 401-499,
Subtask 27-54-46-020-055
B. Removal of the Pendulum of the No.1 Flap Track Carriage
(Ref. Fig. 404/TASK 27-54-46-991-006)
WARNING : SUPPORT THE UNIT/ASSEMBLY OR IT WILL FALL AND BECOME DAMAGED OR
_______ INJURE PERSONNEL. THE UNIT/ASSEMBLY IS HEAVY.
(1)
Remove the bolts (21) and the washers (22) from the captive nuts (24).
(2)
Remove the bolt (20), the washer (19) and the nut (26).
(3)
Remove the stop plate (23) from the flap track beam (25).
中國航空網 www.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：A320飛機維護手冊 AMM FLIGHT CONTROLS 飛行操縱5(75)
