REFERENCE DESIGNATION
 -------------------------------------------------------------------------------
**ON A/C 301-399,
 32-42-71-991-001 Fig. 401A
 **ON A/C ALL
 3. Job Set-up
__________
 Subtask 32-42-71-941-050

 A. Safety Precautions
 (1)
 Put the safety barriers in position.

 (2)
 Make sure that the ground safety locks are on the landing gear (Ref. TASK 32-00-00-481-001).

 (3)
 On the panel 400VU:

 -make sure that the landing-gear control-lever 6GA is in the DOWN position
 -put a warning notice in position to tell persons not to operate the landing gear.

 (4)
 Put a warning notice in position to tell persons not to operate the brakes.

 Subtask 32-42-71-010-050
 B. Get Access
 (1) Remove the applicable MLG wheel (Ref. TASK 32-41-11-000-006).
 4. Procedure
_________ R **ON A/C 001-049, 051-099, 101-149, 151-199, 201-299, 401-499,
 (Ref. Fig. 401/TASK 32-42-71-991-001-A)
 1EFF : ALL 1 32-42-71Page 402 1 1 Aug 01/05 1 1 1CES 1

 MLG Axle Adaptor-Sleeve - Removal/Installation Figure 401/TASK 32-42-71-991-001-A
R 1EFF : 001-049, 051-099, 101-149, 151-199, 1 32-42-71Page 403 1201-299, 401-499, 1Aug 01/05 1 1 1CES 1 **ON A/C 301-399,

 (Ref. Fig. 401A/TASK 32-42-71-991-001) R **ON A/C 001-049, 051-099, 101-149, 151-199, 201-299, 401-499,
 Subtask 32-42-71-020-050-A
 A. Removal of the MLG Axle Adaptor-Sleeve
 (1) Carefully remove the retaining ring (3). Make sure that you do not damage the axle threads.
 (2) Remove the axle sleeve (2).
 **ON A/C 301-399,

 Subtask 32-42-71-020-050
 A. Removal of the MLG Axle Adaptor-Sleeve
 (1)
 Carefully remove the circlip (3). Make sure that you do not damage the axle threads.

 (2)
 Remove the axle sleeve (2).

 1EFF : ALL 1 32-42-71Page 404 1 1 Aug 01/05 1 1 1CES 1R MLG Axle Adaptor-Sleeve - Removal/Installation R Figure 401A/TASK 32-42-71-991-001

R 1EFF : 301-399, 1 32-42-71Page 405 1 1 May 01/04 1 1 1CES 1R **ON A/C ALL

 TASK 32-42-71-400-001
 Installation of the MLG Axle Adaptor-Sleeves
 WARNING : MAKE SURE THAT THE GROUND SAFETY-LOCKS ARE IN POSITION ON THE LANDING
_______
 GEAR.

 WARNING : MAKE SURE THAT THE FLIGHT CONTROL SAFETY-LOCKS AND THE WARNING
_______
 NOTICES ARE IN POSITION.

 CAUTION : WHEN YOU DO A MAINTENANCE TASK THAT USES COMMON GREASE, USE ONLY
_______ GREASES OF THE SAME SPECIFICATION (IT IS PERMITTED TO USE DIFFERENT BRANDS IF THEIR SPECIFICATIONS ARE THE SAME). DO NOT MIX GREASES THAT HAVE CLAY THICKENERS WITH GREASES THAT HAVE LITHIUM THICKENERS. THIS MIXTURE CAN CHANGE THE LUBRICATION PROPERTIES OF THE GREASE. IF YOU USE GREASES OF DIFFERENT TYPES (SPECIALLY THOSE WITH CLAY THICKENERS AND LITHIUM THICKENERS), DECREASE THE SERVICE INTERVALS OF THE AIRCRAFT (BY HALF, FOR EXAMPLE) SPECIFIED IN THE MAINTENANCE PLANNING DOCUMENT. DO THIS FOR APPROXIMATELY THREE OR FOUR SERVICES (REFER TO YOUR IN-SERVICE DATA TO FIND THE NUMBER OF SERVICES BEST ADAPTED TO YOUR AIRCRAFT).
 1. Reason for the Job
__________________
 Self Explanatory
 2. Job Set-up Information
______________________
 A. Fixtures, Tools, Test and Support Equipment
 -------------------------------------------------------------------------------
REFERENCE QTY DESIGNATION
 -------------------------------------------------------------------------------
No specific safety barriers
 No specific warning notice

 1EFF : ALL 1 32-42-71Page 406 1 1 May 01/04 1 1 1CES 1 B. Consumable Materials

 -------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
Material No. 04-001  F AIR-4205
 WHEEL BEARING MINERAL GREASE (Ref. 20-31-00)

 Material No. 04-004  USA MIL-PRF-23827 TYPE I
 SYNTH.ESTER BASED GREASE HIGH PRESSURE
 (Ref. 20-31-00)

 Material No. 04-022  USA MIL-PRF-81322 GRADE 2
 SYNTHE.HYDROCARBON GREASE HIGH PRESSURE
 (Ref. 20-31-00)

 Material No. 11-026 GB DEF-STAN 68-148/1
 SOLVENT GENERAL PURPOSE (Ref. 20-31-00)
 Material No. 19-003 USA AMS 3819
 LINT-FREE COTTON CLOTH (Ref. 20-31-00)

 C. Referenced Information
 -------------------------------------------------------------------------------
REFERENCE  DESIGNATION
 -------------------------------------------------------------------------------
　
中國航空網 www.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：A320飛機維護手冊 AMM LANDING GEAR 起落架7(43)