4. Procedure
_________
R
Subtask 36-22-16-020-050
A. Removal of the Overheat Sensing Elements
R R CAUTION : REMOVE OR INSTALL THE SENSING ELEMENTS CAREFULLY. DO NOT TWIST,_______ BEND OR CAUSE KINKS IN THE SENSING ELEMENTS.
(1) Remove the sensing elements 29HF(45HF) (1) and 56HF(72HF) (8):
(a) Release the quick-release fasteners (27) and open the clamps (25). Retain the protective sleeves (26).
R R R WARNING : WEAR GOGGLES WHEN YOU REMOVE OR INSTALL THE LOCKWIRE._______ CUT, REMOVE AND DISCARD THE LOCKWIRE AS YOU DO THE TASK. LOOSE LOCKWIRE CAN CUT OR BLIND YOU.
(b) Remove and discard the lockwire from the connectors (19) and (22) and the nut (20).
(c) Disconnect the connector (19) from the connector (22).
(d) Remove the nut (20) from the connector (22).
(e) Remove the connector (22) from the flanged attachment (21).
(f) Put blanking caps on the disconnected electrical connectors.
(g) Remove a sufficient amount of the cables 21HF(37HF) (40) and 77HF(64HF) (44) (Ref. TASK 36-22-16-000-002) to let you remove the overheat sensing element 56HF(72HF) (8).
(2) Remove the sensing elements 83HF(82HF) (2) and 81HF(80HF) (7):
(a) Release the quick-release fasteners (27) and open the clamps (25). Retain the protective sleeves (26).
R R R WARNING : WEAR GOGGLES WHEN YOU REMOVE OR INSTALL THE LOCKWIRE._______ CUT, REMOVE AND DISCARD THE LOCKWIRE AS YOU DO THE TASK. LOOSE LOCKWIRE CAN CUT OR BLIND YOU.
(b) Remove and discard the lockwire from the connectors (19), (22), (23) and (24), and the nuts (20).
(c)
Disconnect the connectors (19) and (24) from the connectors (22) and (23).
(d)
Remove the nut (20) from the connectors (22) and (23).
(e)
Remove the connectors (22) and (23) from the flanged attachment (21).
(f)
Put blanking caps on the disconnected electrical connectors.
(g)
Remove a sufficient amount of the cables 21HF(37HF) (40) and 77HF(64HF) (44) (Ref. TASK 36-22-16-000-002) to let you remove the overheat sensing element 81HF(80HF) (7).
(3) Remove the applicable overheat sensing element (1), (2), (7) or (8).
1EFF : ALL 1 36-22-16Page 410 1 1 May 01/05R 1 1 1CES 1
TASK 36-22-16-400-001
Installation of the Overheat Sensing Elements 29HF(45HF),56HF(72HF),81HF(80HF), 83HF(82HF)
WARNING : MAKE SURE THAT THE FLIGHT CONTROL SAFETY-LOCKS AND THE WARNING_______ NOTICES ARE IN POSITION.
WARNING : MAKE SURE THAT THE GROUND SAFETY-LOCKS ARE IN POSITION ON THE LANDING_______ GEAR.
1. Reason for the Job__________________
R R Self Explanatory
2. Job Set-up Information______________________
A. Fixtures, Tools, Test and Support Equipment
-------------------------------------------------------------------------------REFERENCE QTY DESIGNATION -------------------------------------------------------------------------------
R R No specific No specific No specific No specific 98D27803000000 safety barrierswarning noticeaccess platform 2.8 m (9 ft. 2 in.) Torque Wrench : range 0.00 to 1.20 m.daN (0.00 to 9.00 lbf.ft)1 LOCKING TOOL - FLAP/SLAT CONTROL LEVER
B. Consumable Materials
-------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
Material No. 11-026 Material No. 19-003 Material No. 19-010 GB DEF-STAN 68-148/1 SOLVENT GENERAL PURPOSE (Ref. 20-31-00)USA AMS 3819 LINT-FREE COTTON CLOTH (Ref. 20-31-00)USA AMS 5687 LOCKWIRE STAINLESS STEEL ANNEALED 0.8MM DIA (Ref. 20-31-00)
C. Referenced Information
-------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
27-80-00-866-004 27-80-00-866-005 36-22-00-710-001 36-22-16-400-002
R 53-35-11-000-001 R 53-35-11-400-001 R 53-35-13-000-002 R R 53-35-13-400-002 R R 57-41-37-000-004 R R R 57-41-37-000-005 R 57-41-37-400-002 R R R 57-41-37-400-005
36-22-16-991-001 36-22-16-991-002 36-22-16-991-003 R 36-22-16-991-004 R 36-22-16-991-005 R 36-22-16-991-009 R 36-22-16-991-011
3. Job Set-up
__________ Extending the Slats on the GroundRetracting the Slats on the GroundOperational Test of the Overheat Detection SystemInstallation of the Cables 21HF(37HF),77HF(64HF) Removal of the Wing-to-Fuselage Fairings Installation of the Wing-to-Fuselage Fairings Removal of the Quick-Release Access Panels from the Belly Fairing Structure Installation of the Quick-Release Access Panels on the Belly Fairing Structure Removal of the Pressure-Relief Panels 521AB(621AB), 521CB(621CB), 521EB(621EB), 522AB(622AB), 522CB(622CB) Removal of the NACA Duct Panel 521BB(621BB) Installation of the Pressure-Relief Panels 521AB(621AB), 521CB(621CB), 521EB(621EB), 522AB(622AB), 522CB(622CB) Installation of the NACA Duct Panel 521BB(621BB)Fig. 401Fig. 402Fig. 403 Fig. 404 Fig. 405 Fig. 406 Fig. 407
中國航空網 www.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：A320飛機維護手冊 AMM PNEUMATIC 氣源 2(118)
