Aileron System Cable Tension Requirements
Figure 402

EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú

 27-11-61
 ALL  ú ú 01 Page 405 ú Mar 15/91
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
737-300/400/500MAINTENANCE MANUAL
 ~.............................................................................. | | | DIAMETER | LENGTH | | | REF NO. | F70207-( ) | (INCHES) | (INCHES) | FUNCTION | ................................................................................ | A/S-1 | -13 | 0.309-0.311 | 2.35 |0.06 | AILERON TRANSFER | | | | | | MECHANISM | | A/S-1A | -19 | 0.309-0.311 | 8.25 +/- 0.25 | AILERON TRANSFER | | | | | | MECHANISM | | A/S-3 | -8 | 0.309-0.311 | 3.7 |0.25 | SPOILER CONTROL | | | | | | QUADRANT LOWER | | | | | | LEVER | | A/S-4 | -11 | 0.309-0.311 | 6.7 |0.25 | AILERON BUS DRUM | 2...........…..............…..............…................…...................1
 B. Consumable Materials
 (1)
D00000 Grease - MIL-G-25760

 C.
References

 (1)
27-11-00/201, Aileron and Aileron Trim Control System

FIRST OFFICER'S CONTROL WHEEL
CAPTAIN'S CONTROL WHEEL

Figure 403

EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú

 27-11-61
 ALL  ú ú 01 Page 406 ú Jul 15/96
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A 737-300/400/500MAINTENANCE MANUAL
 D. Access
 (1)  
Location Zone
 101 Control Cabin, LH
 102 Control Cabin, RH
 216 Main Wheel Well, LH
 217 Main Wheel Well, RH

 E.
Procedure

 S 644-009
 (1)
Lubricate the cables AA and AB with grease.

 S 434-010

 (2)
Connect the cables AA and AB to the spoiler drum.

CONTROL WHEEL
TORQUE AND FORCE TEST ADAPTER (F72867)
Control Wheel Torque and Force Test Adapter Tool
Figure 404

EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú

 27-11-61
 ALL  ú ú 02 Page 407 ú Jul 12/00
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A 737-300/400/500MAINTENANCE MANUAL
 S 424-036
 (3)  Install the transfer mechanism (Fig. 401):
 NOTE: It is recommended if not already accomplished to have a
____ bearing support without pocket installed in the aileron transfer mechanism to prevent jamming of the first officer's control wheel (foreign object's collected in the pocket of the lower bearing support can cause jamming). Replacement the spoiler drum bearings and the lower drum in the aileron transfer control mechanism will also prevent binding at the spoiler lower cable drum and to prevent interference to the free turning of control wheel.
 (a)  
Install the cable guards (Fig. 401).

 (b)  
Install the screws, washers, and nuts.

 (c)  
Lubricate the cables ACBA and ACBB with grease.

 (d)  
Connect the cables ACBA and ACBB to the bus drum.

 (e)  
Put the ends of the cables ACBA and ACBB through the openings while you put the transfer mechanism in its position.

 (f)  
Install the bolts, washers and nuts.

 (g)  
Connect the cables ACBA, ACBB, AA, and AB to the correct turnbuckles.

 (h)  
Tighten the cable turnbuckles but keep the cable tension at zero.

 S 094-031
 (4)  
Remove the rig pins A/S-1, A/S-3, and A/S-4.

 S 864-012

 (5)  
Put the captains's and the first officer's control wheels in the neutral position.

 S 494-018

 (6)  
Attach a straightedge across the top of the two aileron control wheels (Fig. 403).

 S 864-033

 (7)  
Make sure that one end of the first officer's control wheel is not more than 0.20 inch from the straightedge.

 S 824-034
　
中國航空網 www.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：737-300 400 500 AMM 飛機維護手冊 飛行操縱 FLIGHT CONTROLS 1(144)