曝光臺 注意防騙 網曝天貓店富美金盛家居專營店坑蒙拐騙欺詐消費者

564 Left Wing - Spoiler No. 3
565 Left Wing - Spoiler No. 2
662 Right Wing - Spoiler No. 8
663 Right Wing - Spoiler No. 9
664 Right Wing - Spoiler No. 10
665 Right Wing - Spoiler No. 11
D. Prepare for the Test
SUBTASK 27-61-00-860-044
(1) Do this task: Supply Electrical Power, TASK 24-22-00-860-811.
SUBTASK 27-61-00-860-045
WARNING: MAKE SURE THAT PERSONS AND EQUIPMENT ARE CLEAR OF ALL CONTROL
SURFACES BEFORE YOU SUPPLY HYDRAULIC POWER. AILERONS, RUDDERS,
ELEVATORS, FLAPS, SLATS, SPOILERS, LANDING GEAR, AND THRUST REVERSERS
CAN MOVE QUICKLY WHEN YOU SUPPLY HYDRAULIC POWER. THIS CAN CAUSE
INJURY TO PERSONS AND DAMAGE TO EQUIPMENT.
(2) Do this task: Spoiler Hydraulic Systems A and B Pressurization, TASK 27-61-00-800-801.
SUBTASK 27-61-00-480-010
(3) Install the mount, SPL-1670 and the control column assembly protractor, SPL-1680 on the
captain’s aileron control wheel.
SUBTASK 27-61-00-820-011
(4) Adjust the control column assembly protractor, SPL-1680 to zero.
SUBTASK 27-61-00-860-046
(5) Move the speed brake lever to the DOWN position.
SUBTASK 27-61-00-860-047
(6) Put the ailerons in the neutral position.
SUBTASK 27-61-00-480-011
(7) Install the protractor, COM-1691 on the flight spoilers 2, 3, 4, 5, 8, 9, 10 and 11.
737-600/700/800/900
AIRCRAFT MAINTENANCE MANUAL
EFFECTIVITY
GUN ALL 27-61-00
Page 542
Oct 10/2007
D633A101-GUN
BOEING PROPRIETARY - Copyright#Unpublished Work - See title page for details
SUBTASK 27-61-00-820-012
(8) Adjust the protractor, COM-1691 to zero.
E. Flight Spoiler System Test
SUBTASK 27-61-00-020-009
(1) Turn the control wheel to 30 degrees clockwise.
(a) Make sure that the spoilers No. 8 and No. 9 are up 10.5 +1.0/-0.0 degrees.
(b) Make sure that the spoiler No. 10 is up 5.5 +1.0/-0.0 degrees.
(c) Make sure that the spoiler No. 11 is up 3.5 +1.0/-0.0 degrees.
SUBTASK 27-61-00-020-010
(2) Turn the control wheel to 82 (+10/-1) degrees clockwise.
(a) Make sure that the spoiler No. 9 is up 37 ± 2 degrees.
(b) Make sure spoiler No. 9 and spoiler No. 8 align in the limit of ± 2 degrees.
(c) Make sure that the spoiler No. 10 is up 32 ± 2 degrees.
(d) Make sure spoiler No. 10 and spoiler No. 11 align in the limit of ± 2 degrees.
(e) Make sure that the spoilers No. 2, 3, 4 and 5 are in the fully down position.
SUBTASK 27-61-00-020-011
(3) Turn the wheel counterclockwise until the spoiler No. 9 starts to move down.
(a) Make sure the spoiler starts to move down when the control wheel is a minimum of 65
degrees clockwise.
SUBTASK 27-61-00-820-013
(4) Turn the control wheel counterclockwise until the spoiler No. 9 is in the fully down position.
(a) Make sure the spoiler is in the fully down position when the control wheel is 5±3 degrees
clockwise.
SUBTASK 27-61-00-820-014
(5) Turn the control wheel to 30 degrees counterclockwise.
(a) Make sure that the spoilers No. 4 and No. 5 are up 10.5 +1.0/-0.0 degrees.
(b) Make sure that the spoiler No. 3 is up 5.5 +1.0/-0.0 degrees.
(c) Make sure that the spoiler No. 2 is up 3.5 +1.0/-0.0 degrees.
SUBTASK 27-61-00-820-015
(6) Turn the control wheel to 82 (+10/-1) degrees counterclockwise.
(a) Make sure that the spoiler No. 4 is up 37 ± 2 degrees.
(b) Make sure that spoiler No. 4 and spoiler No. 5 align in the limit of ± 2 degrees.
(c) Make sure that the spoiler No. 3 is up 32 ± 2 degrees.
(d) Make sure that spoiler No. 3 and Spoiler No. 2 align in the limit of ± 2 degrees.
(e) Make sure that the spoilers No. 8, No. 9, No. 10 and No. 11 are in the fully down position.
SUBTASK 27-61-00-820-016
(7) Turn the control wheel clockwise until the spoiler No. 4 starts to move down.
(a) Make sure the spoiler starts to move down when the control wheel is a minimum of 65
degrees counterclockwise.
SUBTASK 27-61-00-820-017
(8) Turn the control wheel clockwise until the spoiler No. 4 is in the fully down position.
737-600/700/800/900
AIRCRAFT MAINTENANCE MANUAL
EFFECTIVITY
GUN ALL 27-61-00
Page 543
Oct 10/2007
D633A101-GUN
BOEING PROPRIETARY - Copyright#Unpublished Work - See title page for details
(a) Make sure the spoiler is in the fully down position when the control wheel is 5±3 degrees
counterclockwise.
SUBTASK 27-61-00-730-014
(9) Shake the control wheel at 0 degrees.
SUBTASK 27-61-00-730-002
(10) Move the speed brake lever to the ARMED detent.
(a) Make sure that spoilers No. 2, 3, 4, 5, 8, 9, 10 and 11 do not extend more than 1.50 degrees.
SUBTASK 27-61-00-710-001
(11) Make sure the speed brakes extend the same when you move the speed brake lever:
　
中國航空網 www.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：737-600-700-800-900 飛機維護手冊6 AIRCRAFT MAINTENANCE MANUA(15)