曝光臺 注意防騙 網曝天貓店富美金盛家居專營店坑蒙拐騙欺詐消費者

(f) Install the Interlock Valve Rigging Tool equipment, SPL-1750.
1) Put the large tool pivot pin in the end of the MLG torque link bolt.
2) Adjust the lower slider assembly [80] so it can be attached to the small pin on the
equipment, SPL-1750.
737-600/700/800/900
AIRCRAFT MAINTENANCE MANUAL
EFFECTIVITY
GUN ALL 27-62-00
Page 529
Feb 10/2007
D633A101-GUN
BOEING PROPRIETARY - Copyright#Unpublished Work - See title page for details
3) Install the scale assembly on the equipment bracket of the landing gear.
(g) Move equipment, SPL-1750 lever to Position A on the scale assembly, and hold it there.
(h) Adjust the lower slider assembly [80] unit the rod end can move freely on the pin of the
equipment, SPL-1750.
1) Make sure the rod end threads cover at least 50% of the inspection hole on the lower
slider assembly [80].
(i) Tighten the checknut [87].
(j) Install the lockwire [86].
(k) Do this task: Ground Spoiler Interlock Valve Functional Test - Rigging Tool Method,
TASK 27-62-61-400-808.
------------------------- END OF TASK ---------------------------
737-600/700/800/900
AIRCRAFT MAINTENANCE MANUAL
EFFECTIVITY
GUN ALL 27-62-00
Page 530
Feb 10/2007
D633A101-GUN
BOEING PROPRIETARY - Copyright#Unpublished Work - See title page for details
Ground Spoiler Interlock Valve Adjustment
Figure 505 (Sheet 1 of 2)/27-62-00-990-812
737-600/700/800/900
AIRCRAFT MAINTENANCE MANUAL
EFFECTIVITY
GUN ALL 27-62-00
Page 531
Jun 10/2006
D633A101-GUN
BOEING PROPRIETARY - Copyright#Unpublished Work - See title page for details
Ground Spoiler Interlock Valve Adjustment
Figure 505 (Sheet 2 of 2)/27-62-00-990-812
737-600/700/800/900
AIRCRAFT MAINTENANCE MANUAL
EFFECTIVITY
GUN ALL 27-62-00
Page 532
Jun 10/2006
D633A101-GUN
BOEING PROPRIETARY - Copyright#Unpublished Work - See title page for details
TASK 27-62-00-820-804
8. Ground Spoiler Adjustment
(Figure 506)
A. References
Reference Title
20-30-84-910-801 Final Cleaning of Metal Prior to Painting (Series 84) (P/B 201)
24-22-00-860-811 Supply Electrical Power (P/B 201)
27-51-00-860-803 Extend the Trailing Edge Flaps (P/B 201)
27-51-00-860-804 Retract the Trailing Edge Flaps (P/B 201)
27-62-00-800-801 Speed Brake Hydraulic Systems A and B Pressurization (P/B 201)
27-62-00-800-802 Remove Pressure from the Speed Brake Hydraulic Systems A and B
(P/B 201)
27-62-00-840-802 Put the Speed Brake Systems A and B Back to the Condition Before
the Pressure Removal (P/B 201)
B. Consumable Materials
Reference Description Specification
A00247 Sealant - Pressure And Environmental - Chromate
Type
BMS5-95
B01004 Solvent - Final Cleaning Of Metal Prior To Painting
(AMM 20-30-84/201) - Series 84
G01912 Lockwire - Monel (0.032 In. Dia.) NASM20995N~
C32
(QQ-N-281)
C. Location Zones
Zone Area
210 Subzone - Control Compartment - Body Station 178.00 to Body
Station 259.50
552 Left Wing - Spoiler No. 6
566 Left Wing - Spoiler No. 1
652 Right Wing - Spoiler No. 7
666 Right Wing - Spoiler No. 12
D. Prepare for the Adjustment
SUBTASK 27-62-00-860-018
(1) Do this task: Supply Electrical Power, TASK 24-22-00-860-811.
SUBTASK 27-62-00-860-019
WARNING: MAKE SURE THAT PERSONS AND EQUIPMENT ARE CLEAR OF ALL CONTROL
SURFACES BEFORE YOU SUPPLY HYDRAULIC POWER. AILERONS, RUDDERS,
ELEVATORS, FLAPS, SLATS, SPOILERS, LANDING GEAR, AND THRUST REVERSERS
CAN MOVE QUICKLY WHEN YOU SUPPLY HYDRAULIC POWER. THIS CAN CAUSE
INJURY TO PERSONS AND DAMAGE TO EQUIPMENT.
(2) Do this task: Speed Brake Hydraulic Systems A and B Pressurization,
TASK 27-62-00-800-801.
SUBTASK 27-62-00-866-007
(3) Do this task: Extend the Trailing Edge Flaps, TASK 27-51-00-860-803.
737-600/700/800/900
AIRCRAFT MAINTENANCE MANUAL
EFFECTIVITY
GUN ALL 27-62-00
Page 533
Oct 10/2007
D633A101-GUN
BOEING PROPRIETARY - Copyright#Unpublished Work - See title page for details
SUBTASK 27-62-00-860-020
(4) Move the speed brake lever to the UP position to lift the spoilers.
SUBTASK 27-62-00-860-021
(5) Do this task: Retract the Trailing Edge Flaps, TASK 27-51-00-860-804.
SUBTASK 27-62-00-860-022
(6) Move the speed brake lever to the DOWN position to lower the ground spoilers.
E. Ground Spoiler Adjustment
SUBTASK 27-62-00-860-023
(1) Measure the clearance between the trailing edge of the spoiler panels and the flaps near the
centerline of the spoiler actuators.
SUBTASK 27-62-00-860-024
(2) Make sure the clearance between spoilers No. 6 and 7 and the flaps is 0.010 +0.090/-0.005 inch
　
中國航空網 www.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：737-600-700-800-900 飛機維護手冊6 AIRCRAFT MAINTENANCE MANUA(65)