曝光臺 注意防騙 網曝天貓店富美金盛家居專營店坑蒙拐騙欺詐消費者

727.00 - Left
134 Main Landing Gear Wheel Well, Body Station 663.75 to Body Station
727.00 - Right
E. Access Panels
Number Name/Location
112A Forward Access Door
F. Spoiler Ratio Changer Installation
SUBTASK 27-61-31-200-001
(1) Make sure the spoiler ratio changer [8] moves smoothly.
SUBTASK 27-61-31-420-001
(2) Put the rod guard [11] on the spoiler ratio changer input rod [12].
SUBTASK 27-61-31-420-002
(3) Install the spoiler ratio changer [8]:
737-600/700/800/900
AIRCRAFT MAINTENANCE MANUAL
EFFECTIVITY
GUN ALL 27-61-31
Page 409
Oct 10/2006
D633A101-GUN
BOEING PROPRIETARY - Copyright#Unpublished Work - See title page for details
(a) Put the spoiler ratio changer [8] in the wheel well.
(b) Attach the speed brake control cable SBA [3] to the speed brake input quadrant [19].
(c) Put the spoiler ratio changer [8] in its position on the structure.
(d) Install bushing [30], bushing [33] and bushing [37]:
1) Apply a thin layer of grease, D00015 between bushing [30], bushing [33], bushing [37]
and the mounting bearings.
2) Install bushing [30] with the shoulder inboard and bushing [33] and [37] with the
shoulders up.
NOTE: Make sure bushing [30], bushing [33] and bushing [37] cam move freely in the
mounting bearings.
(e) Install bolt [29], bolt [31] and bolt [35] to attach the spoiler ratio changer [8]:
1) Move the rod guard [11] if it is necessary to get access to bolt [29], bolt [31] and bolt
[35].
2) Install bolt [29] with the head inboard.
3) Install bolt [31] with the head up.
4) Install bolt [35] with the head up.
5) Install washer [32] and nut [34].
6) Install washer [36] and nut [38].
7) Tighten bolt [29], nut [34], and nut [38] to 50-70 pound-inches (5.6-7.9 newton-meters).
SUBTASK 27-61-31-420-003
(4) Install the rod guard [11] on the spoiler ratio changer [8]:
(a) Move the rod guard [11] to its position on the spoiler ratio changer [8].
(b) Install washers [10] and bolts [9].
SUBTASK 27-61-31-420-004
(5) Attach speed brake control cable SBB [2] to the speed brake input quadrant [19].
(a) Tighten cables to remove slack and remove control cable clamp, SPL-1569.
SUBTASK 27-61-31-420-005
(6) Attach spoiler control cables WSA1, WSA2 [5] and WSB1, WSB2 [7] to the left and right spoiler
output quadrant [18].
(a) Turn the spoiler output quadrant [18] if it is necessary to attach the spoiler control cables
WSA1, WSA2 [5], WSB1, WSB2 [7] and the cable retainers.
(b) Tighten cables to remove slack and remove control cable clamp, SPL-1569.
SUBTASK 27-61-31-420-006
(7) Do this task: Spoiler Mixer Installation, TASK 27-61-21-400-801.
NOTE: It is not necessary to adjust the output cam of the spoiler mixer at this time.
SUBTASK 27-61-31-820-001
(8) Do this task: Speed Brake Control Cable Adjustment, TASK 27-62-00-820-802.
SUBTASK 27-61-31-820-002
(9) Do this task: Spoiler Control Cables Adjustment, TASK 27-61-00-820-801.
SUBTASK 27-61-31-820-003
(10) Do this task: Ratio Changer Input Rod Adjustment, TASK 27-61-00-820-802.
737-600/700/800/900
AIRCRAFT MAINTENANCE MANUAL
EFFECTIVITY
GUN ALL 27-61-31
Page 410
Jun 10/2004
D633A101-GUN
BOEING PROPRIETARY - Copyright#Unpublished Work - See title page for details
SUBTASK 27-61-31-820-004
(11) Do this task: Spoiler Mixer Adjustment, TASK 27-61-00-820-805.
SUBTASK 27-61-31-720-001
(12) Do this task: Flight Spoiler System Test (Alternate Method), TASK 27-61-00-000-801.
SUBTASK 27-61-31-710-001
(13) Do this task: Spoiler Manual Operation Test, TASK 27-61-00-000-802.
SUBTASK 27-61-31-410-001
(14) Close this access panel:
Number Name/Location
112A Forward Access Door
------------------------- END OF TASK ---------------------------
737-600/700/800/900
AIRCRAFT MAINTENANCE MANUAL
EFFECTIVITY
GUN ALL 27-61-31
Page 411
Jun 10/2004
D633A101-GUN
BOEING PROPRIETARY - Copyright#Unpublished Work - See title page for details
SPOILER RATIO CHANGER INPUT ROD - INSPECTION/CHECK
1. General
A. There is one task in this procedure, an inspection of the spoiler ratio changer input rod.
TASK 27-61-31-200-801
2. Spoiler Ratio Changer Inspection
(Figure 601)
A. General
(1) This procedure gives wear limits and repair data for the spoiler ratio changer input rod.
B. Tools/Equipment
Reference Description
STD-1096 Micrometer - Depth, 0-1 Inch, Readable to 1/1000 Inch
STD-1097 Caliper - Vernier, 0-6 Inch, Readable to 1/1000 Inch
C. Location Zones
Zone Area
133 Main Landing Gear Wheel Well, Body Station 663.75 to Body Station
　
中國航空網 www.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：737-600-700-800-900 飛機維護手冊6 AIRCRAFT MAINTENANCE MANUA(42)