曝光臺 注意防騙 網曝天貓店富美金盛家居專營店坑蒙拐騙欺詐消費者

you return the airplane to ground mode.
E. Put the Airplane Back to Its Usual Condition
SUBTASK 27-62-00-860-111
(1) Do this task: Put the Speed Brake Hydraulic systems A and B Back to the Condition Before
the Pressurization, TASK 27-62-00-840-801.
SUBTASK 27-62-00-860-112
(2) Close these circuit breakers:
F/O Electrical System Panel, P6-1
Row Col Number Name
D 13 C00120 WEATHER RADAR RT
F/O Electrical System Panel, P6-2
Row Col Number Name
B 14 C01070 FLIGHT CONTROL AUTOSLAT DC 2
C 14 C01068 FLIGHT CONTROL AUTOSLAT DC 1
------------------------- END OF TASK ---------------------------
737-600/700/800/900
AIRCRAFT MAINTENANCE MANUAL
EFFECTIVITY
GUN ALL 27-62-00
Page 558
Jun 10/2006
D633A101-GUN
BOEING PROPRIETARY - Copyright#Unpublished Work - See title page for details
TASK 27-62-00-820-809
15. Speed Brake RTO Test
(Figure 507)
A. References
Reference Title
24-22-00-860-811 Supply Electrical Power (P/B 201)
27-62-00-800-801 Speed Brake Hydraulic Systems A and B Pressurization (P/B 201)
27-62-00-840-801 Put the Speed Brake Hydraulic systems A and B Back to the
Condition Before the Pressurization (P/B 201)
78-31-00-700-804-F00 Thrust Reverser Engine Accessory Unit (EAU) Test (P/B 501)
B. Location Zones
Zone Area
117 Electrical and Electronics Compartment - Left
118 Electrical and Electronics Compartment - Right
210 Subzone - Control Compartment - Body Station 178.00 to Body
Station 259.50
C. Access Panels
Number Name/Location
117A Electronic Equipment Access Door
D. Prepare for the Test
SUBTASK 27-62-00-860-113
(1) Do this task: Supply Electrical Power, TASK 24-22-00-860-811.
SUBTASK 27-62-00-860-114
WARNING: MAKE SURE THAT PERSONS AND EQUIPMENT ARE CLEAR OF ALL CONTROL
SURFACES BEFORE YOU SUPPLY HYDRAULIC POWER. AILERONS, RUDDERS,
ELEVATORS, FLAPS, SLATS, SPOILERS, LANDING GEAR, AND THRUST REVERSERS
CAN MOVE QUICKLY WHEN YOU SUPPLY HYDRAULIC POWER. THIS CAN CAUSE
INJURY TO PERSONS AND DAMAGE TO EQUIPMENT.
(2) Do this task: Speed Brake Hydraulic Systems A and B Pressurization,
TASK 27-62-00-800-801.
SUBTASK 27-62-00-860-115
(3) Open this circuit breaker and install safety tag:
F/O Electrical System Panel, P6-2
Row Col Number Name
C 14 C01068 FLIGHT CONTROL AUTOSLAT DC 1
(3) Open this circuit breaker and install safety tag:
F/O Electrical System Panel, P6-2
Row Col Number Name
B 14 C01070 FLIGHT CONTROL AUTOSLAT DC 2
737-600/700/800/900
AIRCRAFT MAINTENANCE MANUAL
EFFECTIVITY
GUN ALL 27-62-00
Page 559
Jun 10/2006
D633A101-GUN
BOEING PROPRIETARY - Copyright#Unpublished Work - See title page for details
SUBTASK 27-62-00-860-116
(4) Move the thrust levers No. 1 and 2 to the idle position.
SUBTASK 27-62-00-860-117
(5) Make sure the airplane is on its landing gear or compress the right main gear strut a minimum
of 5 inches (127 mm).
NOTE: This will open the ground spoiler interlock valve.
SUBTASK 27-62-00-860-118
(6) Make sure the ground spoilers are in the down position.
SUBTASK 27-62-00-860-119
(7) Make sure the speed brake lever is in the DOWN position.
SUBTASK 27-62-00-860-215
WARNING: MAKE SURE THAT YOU OPEN THE CIRCUIT BREAKER FOR THE WEATHER RADAR
SYSTEM. THE FORWARD MOVEMENT OF A THRUST LEVER CAN CAUSE THE
AUTOMATIC OPERATION OF THE SYSTEM. THE OPERATION OF THIS SYSTEM CAN
CAUSE SERIOUS INJURY TO PERSONS AND DAMAGE TO EQUIPMENT IN THE AREA
OF THE NOSE RADOME.
(8) Open this circuit breaker and install safety tag:
F/O Electrical System Panel, P6-1
Row Col Number Name
D 13 C00120 WEATHER RADAR RT
SUBTASK 27-62-00-860-120
(9) Move one of the thrust levers to the full forward position to retract the auto speed brake actuator.
SUBTASK 27-62-00-860-121
(10) Move the thrust lever to the idle position.
SUBTASK 27-62-00-860-122
(11) Make sure the parking brake is released.
SUBTASK 27-62-00-010-004
(12) Open this access panel:
Number Name/Location
117A Electronic Equipment Access Door
E. Speed Brake RTO Test
SUBTASK 27-62-00-860-217
(1) Move the engine ignition switches from OFF to CONTINUOUS.
SUBTASK 27-62-00-860-123
WARNING: KEEP PERSONNEL AND EQUIPMENT AWAY FROM THE AREA AROUND THE THRUST
REVERSERS. THE THRUST REVERSERS EXTEND AND RETRACT QUICKLY. INJURIES
TO PERSONNEL, AND DAMAGE TO EQUIPMENT CAN OCCUR.
(2) Move the No. 1 reverse thrust lever to the REVERSE thrust position.
(a) Make sure the SPEED BRAKE ARMED light comes on.
SUBTASK 27-62-00-860-124
(3) Move the TEST SELECTOR switch to the INBD position on the antiskid/autobrake control unit
　
中國航空網 www.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：737-600-700-800-900 飛機維護手冊6 AIRCRAFT MAINTENANCE MANUA(75)