(9)
 Pull the spoiler rearwards and outboard to disengage it from the shaft (21) and then remove it from the aircraft. Collect the spacer (20).

 (10) If it is necessary to remove the shaft (21):
 -
remove the spoiler 3 (Ref. TASK 27-64-43-000-001)

 -
remove the shaft (21).

R 1EFF : 004-049, 053-099, 101-149, 151-199, 1 27-64-44Page 416 1201-299, 301-399, 401-499, 1Aug 01/05 1 1 1CES 1

 **ON A/C ALL

 TASK 27-64-44-400-001
 Installation of the Spoiler 4
 WARNING : MAKE SURE THAT THE FLIGHT CONTROL SAFETY-LOCKS AND THE WARNING
_______
 NOTICES ARE IN POSITION.

 WARNING : MAKE SURE THAT THE GROUND SAFETY-LOCKS ARE IN POSITION ON THE LANDING
_______
 GEAR.

 CAUTION : BE CAREFUL WHEN YOU DO MAINTENANCE TASKS ON THE WING TRAILING EDGE:
_______
 -
DO NOT CAUSE DAMAGE TO THE ELECTRICAL CABLE RACEWAYS.

 -
DO NOT CAUSE DAMAGE TO THE ELECTRICAL CABLE INSTALLATIONS.

 -MAKE SURE THAT THE ELECTRICAL CABLES ARE INSTALLED CORRECTLY. INCORRECT INSTALLATION CAN CAUSE DAMAGE.
 1. Reason for the Job
__________________
 Self Explanatory
 2. Job Set-up Information
______________________
 A. Fixtures, Tools, Test and Support Equipment
 -------------------------------------------------------------------------------REFERENCE QTY DESIGNATION -------------------------------------------------------------------------------
No specific circuit breaker(s) safety clip(s)
 No specific safety barriers
 No specific supports
 No specific warning notice

R No specific Torque Wrench : range 0.00 to 1.20 m.daN R (0.00 to 9.00 lbf.ft) No specific Torque Wrench : range 0.20 to 3.60 m.daN
 (2.00 to 26.00 lbf.ft) No specific Torque Wrench : range 1.00 to 10.00 m.daN
 (8.00 to 75.00 lbf.ft) SL90-313-5000 1 TOOL - INSTALLATION, TAB WASHER STA-LOK NSA5454 SL90-313-6250 1 TOOL- INSTALLATION, TAB WASHERS STA-LOK NSA5454 SL90-313-7500 1 TOOL - INSTALLATION, TAB WASHERS STA-LOK NSA5454 SL90-315-5000 1 WRENCHES - NOTCHED, TIGHTENING OF NUTS NSA5454 SL90-315-6250 1 WRENCHES - NOTCHED, TIGHTENING OF NUTS NSA5454 SL90-315-7500 1 WRENCHES - NOTCHED, TIGHTENING OF NUTS NSA5454 -------------------------------------------------------------------------------REFERENCE QTY DESIGNATION -------------------------------------------------------------------------------

98D27603002000 2 SPOILER MAINTENANCE KEY 98D27603002001 2 SPOILER MAINTENANCE KEY
 B. Consumable Materials
 -------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
Material No. 04-022  USA MIL-PRF-81322 GRADE 2 SYNTHE.HYDROCARBON GREASE HIGH PRESSURE (Ref. 20-31-00)
 Material No. 09-018  USA AMS 3267/3 CORROSION INHIBITING LOW ADHESION SEALANT (Ref. 20-31-00)
 Material No. 09-019  USA AMS 3267/3 LOW ADHESION CORROSION INHIBITING SEALANT (Ref. 20-31-00)
 Material No. 11-026  GB DEF-STAN 68-148/1 SOLVENT GENERAL PURPOSE (Ref. 20-31-00)
 Material No. 15-007  AIB TN 10138 TYPE II GRADE 1 CORROSION PREVENTIVE TEMPORARY PROTECTIVE COMPOUND (Ref. 20-31-00)
 Material No. 19-003  USA AMS 3819 LINT-FREE COTTON CLOTH (Ref. 20-31-00)
 C. Expendable Parts
 -------------------------------------------------------------------------------FIG.ITEM |DESIGNATION |IPC-CSN -------------------------------------------------------------------------------
1 cotter pin 27-64-05 04E-004 26 cotter pin 27-64-05 14 -180 26 cotter pin 27-64-05 14A-180 34 cotter pin 27-64-05 14 -300 34 cotter pin 27-64-05 14A-300 35 cotter pin 27-64-05 14 -300 35 cotter pin 27-64-05 14A-300 49 cotter pin 27-64-05 14 -100 49 cotter pin 27-64-05 14A-100
 1EFF : ALL 1 27-64-44Page 418 1 1 May 01/05R 1 1 1CES 1

 D. Referenced Information
 -------------------------------------------------------------------------------
REFERENCE  DESIGNATION
 -------------------------------------------------------------------------------
20-22-00-400-001  Installation of STA-LOK Nuts and Lockwashers
 20-28-00-912-004  Electrical Bonding of Components With Conductive Bolts and Screws and Bonding Straps in the Fuselage and in the Wings (this does not include the tanks)-
27-60-00-866-002 Extension-Retraction of the Spoilers for Maintenance 27-64-00-710-001 Operational Test of the Spoiler Hydraulic Actuation 27-64-00-820-001 Adjustment of the Spoilers 27-64-43-400-001 Installation of the Spoiler 3 29-10-00-863-002 Pressurize the Yellow Hydraulic System 57-51-37-400-004 Installation of the Access Panels
　
中國航空網 www.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：A320飛機維護手冊 AMM FLIGHT CONTROLS 飛行操縱6(166)