Subtask 27-54-62-220-071
G. Not applcable.
R **ON A/C 301-399,
R Subtask 27-54-62-220-065-A
R A. Dimensions of the Joint that Connects the Actuator Lever to the Drive
R Strut (Track 3).
R (1) Do a check of the dimensions that follow:
R -------------------------------------------------------------------------------
R | FIG. | ORIGINAL MANUFACTURING LIMITS | IN-SERVICE WEAR LIMITS |
R | DETAIL |---------------------------------------|----------------------------|
R | AND | DIMENSION | ASSEMBLY CLEARANCE| DIMENSION LIMITS | MAX. |
R | ITEM | MM (IN.) | MM (IN.) | MM (IN.) | ALLOW. |
R | NO. |-------------------|-------------------|---------|---------| CLEAR. |
R | | MIN. | MAX. | MIN. | MAX. | MIN. | MAX. |MM (IN.)|
R |--------|---------|---------|---------|---------|---------|---------|--------|
R | A | 25.374 | 25.384 | | | 25.342 | | |
R | OD 1 |(0.9989) |(0.9993) | | |(0.9977) | | |
R | | | | 0.016 | 0.047 | | | 0.111 |
R | | | | (0.0006)| (0.0018)| | |(0.0043)|
R | A | 25.400 | 25.421 | | | | 25.453 | |
R | ID 2 |(1.0000) |(1.0008) | | | |(1.0020) | |
R -------------------------------------------------------------------------------
R Subtask 27-54-62-220-066-A
R B. Dimensions of the Joint that Connects the Actuator Lever to the Drive
R Strut (Track 3).
R (1) Do a check of the dimensions that follow:
R -------------------------------------------------------------------------------
R | FIG. | ORIGINAL MANUFACTURING LIMITS | IN-SERVICE WEAR LIMITS |
R | DETAIL |---------------------------------------|----------------------------|
R | AND | DIMENSION | ASSEMBLY CLEARANCE| DIMENSION LIMITS | MAX. |
R | ITEM | MM (IN.) | MM (IN.) | MM (IN.) | ALLOW. |
R | NO. |-------------------|-------------------|---------|---------| CLEAR. |
R | | MIN. | MAX. | MIN. | MAX. | MIN. | MAX. |MM (IN.)|
R |--------|---------|---------|---------|---------|---------|---------|--------|
R | A | 25.374 | 25.384 | | | 25.359 | | |
R | OD 1 |(0.9989) |(0.9993) | | |(0.9983) | | |
R | | | | 0.003 | 0.026 | | | 0.056 |
R | | | | (0.0001)| (0.0010)| | |(0.0022)|
R | A | 25.387 | 25.400 | | | | 25.415 | |
R | ID 4 |(0.9994) |(1.0000) | | | |(1.0005) | |
R -------------------------------------------------------------------------------
R Subtask 27-54-62-220-067-A
R C. Dimensions of the Joint that Connects the Actuator Lever to the Drive
R Strut (Track 3).
R (1) Do a check of the dimensions that follow:
R -------------------------------------------------------------------------------
R | FIG. | ORIGINAL MANUFACTURING LIMITS | IN-SERVICE WEAR LIMITS |
R | DETAIL |---------------------------------------|----------------------------|
R | AND | DIMENSION | ASSEMBLY CLEARANCE| DIMENSION LIMITS | MAX. |
R | ITEM | MM (IN.) | MM (IN.) | MM (IN.) | ALLOW. |
R | NO. |-------------------|-------------------|---------|---------| CLEAR. |
R | | MIN. | MAX. | MIN. | MAX. | MIN. | MAX. |MM (IN.)|
R |--------|---------|---------|---------|---------|---------|---------|--------|
R | A | 30.950 | 30.975 | | | 30.900 | | |
R | OD 2 |(1.2185) |(1.2194) | | |(1.2165) | | |
R | | | | 0.025 | 0.075 | | | 0.175 |
R | | | | (0.0009)| (0.0029)| | |(0.0068)|
R | A | 31.000 | 31.025 | | | | 31.075 | |
R | ID 3 |(1.2204) |(1.2214) | | | |(1.2234) | |
R -------------------------------------------------------------------------------
R Subtask 27-54-62-220-068-A
R D. Dimensions of the Joint that Connects the Actuator Lever to the Drive
R Strut (Track 4).
R (1) Do a check of the dimensions that follow:
R -------------------------------------------------------------------------------
R | FIG. | ORIGINAL MANUFACTURING LIMITS | IN-SERVICE WEAR LIMITS |
中國航空網 www.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：A320飛機維護手冊 AMM FLIGHT CONTROLS 飛行操縱6(88)
