(2)
Make sure that the LOCKING TOOL - FLAP/SLAT CONTROL LEVER is installed on the flap/slat control lever.
4. Procedure
_________
CAUTION : BE CAREFUL WHEN YOU DO MAINTENANCE TASKS ON THE WING TRAILING
_______
EDGE:
-
DO NOT CAUSE DAMAGE TO THE ELECTRICAL CABLE RACEWAYS.
-
DO NOT CAUSE DAMAGE TO THE ELECTRICAL CABLE INSTALLATIONS.
-MAKE SURE THAT THE ELECTRICAL CABLES ARE INSTALLED CORRECTLY. INCORRECT INSTALLATION CAN CAUSE DAMAGE.
Subtask 27-54-61-020-053-A
A. Removal of the Flap Kink-Seals R **ON A/C 001-049, 051-099, 101-149, 151-199, 201-299, 401-499,
(Ref. Fig. 409/TASK 27-54-61-991-003)
**ON A/C 301-399,
(Ref. Fig. 409A/TASK 27-54-61-991-003-A) R **ON A/C 001-049, 051-099, 101-149, 151-199, 201-299, 401-499,
(Ref. Fig. 410/TASK 27-54-61-991-002)
**ON A/C 301-399,
(Ref. Fig. 410A/TASK 27-54-61-991-002-A)
R 1EFF : ALL 1 27-54-61Page 456 1 1 Aug 01/05 1 1 1CES 1
Details of the Kink-Seals (Outboard Flap)
Figure 409/TASK 27-54-61-991-003
R 1EFF : 001-049, 051-099, 101-149, 151-199, 1 27-54-61Page 457 1201-299, 401-499, 1Aug 01/05 1 1 1CES 1
Details of the Kink-Seals (Outboard Flap)
Figure 409A/TASK 27-54-61-991-003-A
R 1EFF : 301-399, 1 27-54-61 Page 458
1 1 Aug 01/05
1 1
1CES 1
Details of the Kink-Seals (Inboard Flap)
Figure 410/TASK 27-54-61-991-002
R 1EFF : 001-049, 051-099, 101-149, 151-199, 1 27-54-61Page 459 1201-299, 401-499, 1Aug 01/05 1 1 1CES 1
Details of the Kink-Seals (Inboard Flap)
Figure 410A/TASK 27-54-61-991-002-A
R 1EFF : 301-399, 1 27-54-61 Page 460
1 1 Aug 01/05
1 1
1CES 1
**ON A/C ALL
(1)
Remove the lower kink-seal:
(2)
Remove the screws (8) and the lower kink-seal (7).
(3)
Remove the outboard flap upper kink-seal and cushion seal:
(a)
Remove the screws (1), the pressure plate (2) and the upper kink-seal (3).
(b)
Remove the screws (4) and (6) and the cushion seal (5).
(4)
Remove the inboard flap upper kink-seal and cushion seal:
(a)
Remove the screws (19), the retainer (20) and the upper kink-seal (21).
(b)
Remove the screw (22) and the cushion seal (23).
1EFF : ALL 1 27-54-61Page 461 1 1 Aug 01/05R 1 1 1CES 1
TASK 27-54-61-400-006
Installation of the Flap Kink-Seals
WARNING : MAKE SURE THAT THE FLIGHT CONTROL SAFETY-LOCKS AND THE WARNING
_______ NOTICES ARE IN POSITION.
WARNING : MAKE SURE THAT THE GROUND SAFETY-LOCKS ARE IN POSITION ON THE LANDING
_______ GEAR.
CAUTION : BE CAREFUL WHEN YOU DO MAINTENANCE TASKS ON THE WING TRAILING EDGE:
_______
-
DO NOT CAUSE DAMAGE TO THE ELECTRICAL CABLE RACEWAYS.
-
DO NOT CAUSE DAMAGE TO THE ELECTRICAL CABLE INSTALLATIONS.
-MAKE SURE THAT THE ELECTRICAL CABLES ARE INSTALLED CORRECTLY. INCORRECT INSTALLATION CAN CAUSE DAMAGE.
1. Reason for the Job
__________________
Self Explanatory
2. Job Set-up Information
______________________
A. Fixtures, Tools, Test and Support Equipment
-------------------------------------------------------------------------------REFERENCE QTY DESIGNATION -------------------------------------------------------------------------------
No specific safety barriers No specific warning notice No specific Torque Wrench : range 0.00 to 1.20 m.daN
(0.00 to 9.00 lbf.ft) 98D27504009000 1 ADJUSTER-KINK SEAL (UPPER FWD WY5396) 98D27504010000 1 ADJUSTER-KINK SEAL (UPPER AFT WY5658) 98D27803000000 1 LOCKING TOOL - FLAP/SLAT CONTROL LEVER
B. Consumable Materials
-------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
Material No. 11-026 GB DEF-STAN 68-148/1 SOLVENT GENERAL PURPOSE (Ref. 20-31-00) Material No. 19-003 USA AMS 3819 LINT-FREE COTTON CLOTH (Ref. 20-31-00)
1EFF : ALL 1 27-54-61Page 462 1 1 Aug 01/05R 1 1 1CES 1
C. Expendable Parts
-------------------------------------------------------------------------------
中國航空網 www.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：A320飛機維護手冊 AMM FLIGHT CONTROLS 飛行操縱6(31)
