(1) Complete an inspection of these dimensions.
-------------------------------------------------------------------------------| FIG. | ORIGINAL MANUFACTURING LIMITS | IN-SERVICE WEAR LIMITS | | DETAIL |---------------------------------------|----------------------------| | AND | DIMENSION | ASSEMBLY CLEARANCE| DIMENSION LIMITS | MAX. | | ITEM | MM (IN.) | MM (IN.) | MM (IN.) | ALLOW. | | NO. |-------------------|-------------------|---------|---------| CLEAR. | | | MIN. | MAX. | MIN. | MAX. | MIN. | MAX. |MM (IN.)| |--------|---------|---------|---------|---------|---------|---------|--------| | F | 7.899 | 7.924 | | | 7.880 | | | | OD 1 |(0.3109) |(0.3120) | | |(0.3102) | | | | | | | 0.000 | 0.038 | | | 0.076 | | | | | (0.0000)| (0.0015)| | |(0.0029)| | F | 7.924 | 7.937 | | | | 7.956 | | | ID 2 |(0.3120) |(0.3125) | | | |(0.3132) | | -------------------------------------------------------------------------------
5. Close-up
________ Subtask 27-64-44-410-051
A. Close Access
(1) Make sure that the work area is clean and clear of tool(s) and other items.
(2) Install the spoiler 4 (Ref. TASK 27-64-44-400-001). Subtask 27-64-44-942-052
B. Removal of Equipment
(1)
Remove the safety barriers.
(2)
Remove the warning notice(s).
(3)
Remove the ground support and maintenance equipment, the special and standard tools and all other items.
SPOILER 5 - REMOVAL/INSTALLATION
________________________________
TASK 27-64-45-000-001
Removal of the Spoiler 5
WARNING : PUT THE SAFETY DEVICES AND THE WARNING NOTICES IN POSITION BEFORE YOU
_______ START A TASK ON OR NEAR:
-
THE FLIGHT CONTROLS
-
THE FLIGHT CONTROL SURFACES
-
THE LANDING GEAR AND THE RELATED DOORS
-COMPONENTS THAT MOVE.
WARNING : MAKE SURE THAT THE GROUND SAFETY-LOCKS ARE IN POSITION ON THE LANDING
_______ GEAR.
CAUTION : BE CAREFUL WHEN YOU DO MAINTENANCE TASKS ON THE WING TRAILING EDGE:
_______
-
DO NOT CAUSE DAMAGE TO THE ELECTRICAL CABLE RACEWAYS.
-
DO NOT CAUSE DAMAGE TO THE ELECTRICAL CABLE INSTALLATIONS.
-MAKE SURE THAT THE ELECTRICAL CABLES ARE INSTALLED CORRECTLY. INCORRECT INSTALLATION CAN CAUSE DAMAGE.
1. Reason for the Job
__________________
Self Explanatory
2. Job Set-up Information
______________________
A. Fixtures, Tools, Test and Support Equipment
-------------------------------------------------------------------------------REFERENCE QTY DESIGNATION -------------------------------------------------------------------------------
No specific circuit breaker(s) safety clip(s) No specific safety barriers No specific supports No specific warning notice No specific access platform 3.9 m (12 ft. 10 in.) SL90-314-5000 1 TOOL - EXTRACTION, TAB WASHERS STA-LOK NSA5454 SL90-314-6250 1 TOOL - EXTRACTION, TAB WASHERS STA-LOK NSA5454 SL90-314-7500 1 TOOL - EXTRACTION, TAB WASHERS STA-LOK NSA5454 SL90-315-5000 1 WRENCHES - NOTCHED, TIGHTENING OF NUTS NSA5454 SL90-315-6250 1 WRENCHES - NOTCHED, TIGHTENING OF NUTS NSA5454 SL90-315-7500 1 WRENCHES - NOTCHED, TIGHTENING OF NUTS NSA5454
1EFF : ALL 1 27-64-45Page 401 1 1 May 01/05R 1 1 1CES 1
B. Referenced Information
-------------------------------------------------------------------------------
REFERENCE DESIGNATION
-------------------------------------------------------------------------------
20-22-00-000-001 Removal of STA-LOK Nuts and Lockwashers 27-60-00-866-002 Extension-Retraction of the Spoilers for Maintenance 57-51-37-000-004 Removal of the Access Panels
575AB/575BB/575CB/575DB/575EB/575FB/575GB/575HB (675AB/675BB/675CB/675DB/675EB/675FB/675GB/675HB)
**ON A/C 001-003, 051-052,
27-64-45-991-001 Fig. 401
**ON A/C 004-049, 053-099, 101-149, 201-299,
27-64-45-991-001-A Fig. 401A R **ON A/C 151-199, 301-399, 401-499,
27-64-45-991-001-B Fig. 401B
**ON A/C 001-003, 051-052,
27-64-45-991-002 Fig. 402 R **ON A/C 004-049, 053-099, 101-149, 151-199, 201-299, 301-399, 401-499,
27-64-45-991-002-A Fig. 402A
**ON A/C ALL
3. Job Set-up
__________
**ON A/C 001-003, 051-052,
(Ref. Fig. 401/TASK 27-64-45-991-001) **ON A/C 004-049, 053-099, 101-149, 201-299,
(Ref. Fig. 401A/TASK 27-64-45-991-001-A) R **ON A/C 151-199, 301-399, 401-499,
中國航空網 www.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：A320飛機維護手冊 AMM FLIGHT CONTROLS 飛行操縱6(176)
