Subtask 27-84-62-220-085
AL. Dimensional Check of Slat 3, Track 8
(1) Fits and clearance dimensions
NOTE : The limits on the chrome-plated surfaces only apply when there
____ is a layer of chrome on the bearing surfaces.
-------------------------------------------------------------------------------| FIG. | ORIGINAL MANUFACTURING LIMITS | IN-SERVICE WEAR LIMITS | | DETAIL |---------------------------------------|----------------------------| | AND | DIMENSION | ASSEMBLY CLEARANCE| DIMENSION LIMITS | MAX. | | ITEM | MM (IN.) | MM (IN.) | MM (IN.) | ALLOW. | | NO. |-------------------|-------------------|---------|---------| CLEAR. | | | MIN. | MAX. | MIN. | MAX. | MIN. | MAX. |MM (IN.)| |--------|---------|---------|---------|---------|---------|---------|--------| | C | 18.959 | 18.980 | | | 18.927 | | | | OD 6 |(0.7464) |(0.7472) | | |(0.7451) | | | | | | | 0.027 | 0.069 | | | 0.133 | | | | | (0.0010)| (0.0027)| | |(0.0052)| | C | 19.007 | 19.028 | | | | 19.060 | | | ID 21 |(0.7483) |(0.7491) | | | |(0.7503) | | -------------------------------------------------------------------------------
Subtask 27-84-62-220-086
AM. Dimensional Check of Slat 3, Track 8
(1) Fits and clearance dimensions
NOTE : The limits on the chrome-plated surfaces only apply when there
____ is a layer of chrome on the bearing surfaces.
1EFF : ALL 1 27-84-62Page 640 1 1 Feb 01/01R 1 1 1CES 1
-------------------------------------------------------------------------------
| FIG. | ORIGINAL MANUFACTURING LIMITS | IN-SERVICE WEAR LIMITS | | DETAIL |---------------------------------------|----------------------------| | AND | DIMENSION | ASSEMBLY CLEARANCE| DIMENSION LIMITS | MAX. | | ITEM | MM (IN.) | MM (IN.) | MM (IN.) | ALLOW. | | NO. |-------------------|-------------------|---------|---------| CLEAR. | | | MIN. | MAX. | MIN. | MAX. | MIN. | MAX. |MM (IN.)| |--------|---------|---------|---------|---------|---------|---------|--------| | C | 12.666 | 12.684 | | | 12.643 | | | | OD 4 |(0.4986) |(0.4993) | | |(0.4977) | | | | | | | 0.016 | 0.052 | | | 0.098 | | | | | (0.0006)| (0.0020)| | |(0.0038)| | C | 12.700 | 12.718 | | | | 12.741 | | | ID 8 |(0.5000) |(0.5007) | | | |(0.5016) | | -------------------------------------------------------------------------------
Subtask 27-84-62-220-087
AN. Dimensional Check of Slat 4, Track 9
(1) Fits and clearance dimensions
NOTE : The limits on the chrome-plated surfaces only apply when there
____ is a layer of chrome on the bearing surfaces.
-------------------------------------------------------------------------------| FIG. | ORIGINAL MANUFACTURING LIMITS | IN-SERVICE WEAR LIMITS | | DETAIL |---------------------------------------|----------------------------| | AND | DIMENSION | ASSEMBLY CLEARANCE| DIMENSION LIMITS | MAX. | | ITEM | MM (IN.) | MM (IN.) | MM (IN.) | ALLOW. | | NO. |-------------------|-------------------|---------|---------| CLEAR. | | | MIN. | MAX. | MIN. | MAX. | MIN. | MAX. |MM (IN.)| |--------|---------|---------|---------|---------|---------|---------|--------| | B | 12.666 | 12.684 | | | 12.639 | | | | OD 1 |(0.4986) |(0.4993) | | |(0.4975) | | | | | | | 0.022 | 0.058 | | | 0.112 | | | | | (0.0008)| (0.0022)| | |(0.0044)| | B | 12.706 | 12.724 | | | | 12.751 | | | ID 2 |(0.5002) |(0.5009) | | | |(0.5020) | | -------------------------------------------------------------------------------
1EFF : ALL 1 27-84-62Page 641 1 1 Feb 01/01R 1 1 1CES 1
Subtask 27-84-62-220-088
AP. Dimensional Check of Slat 4, Track 9
(1) Fits and clearance dimensions
NOTE : The limits on the chrome-plated surfaces only apply when there
____ is a layer of chrome on the bearing surfaces.
-------------------------------------------------------------------------------| FIG. | ORIGINAL MANUFACTURING LIMITS | IN-SERVICE WEAR LIMITS | | DETAIL |---------------------------------------|----------------------------| | AND | DIMENSION | ASSEMBLY CLEARANCE| DIMENSION LIMITS | MAX. | | ITEM | MM (IN.) | MM (IN.) | MM (IN.) | ALLOW. | | NO. |-------------------|-------------------|---------|---------| CLEAR. | | | MIN. | MAX. | MIN. | MAX. | MIN. | MAX. |MM (IN.)| |--------|---------|---------|---------|---------|---------|---------|--------| | B | 12.666 | 12.684 | | | 12.653 | | | | OD 1 |(0.4986) |(0.4993) | | |(0.4981) | | | | | | | 0.003 | 0.034 | | | 0.060 | | | | | (0.0001)| (0.0013)| | |(0.0023)| | B | 12.687 | 12.700 | | | | 12.713 | | | ID 3 |(0.4994) |(0.5000) | | | |(0.5005) | | -------------------------------------------------------------------------------
中國航空網 www.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：A320飛機維護手冊 AMM FLIGHT CONTROLS 飛行操縱8(101)
