曝光臺 注意防騙 網曝天貓店富美金盛家居專營店坑蒙拐騙欺詐消費者

____ is a layer of chrome on the bearing surfaces.
 -------------------------------------------------------------------------------| FIG. | ORIGINAL MANUFACTURING LIMITS | IN-SERVICE WEAR LIMITS | | DETAIL |---------------------------------------|----------------------------| | AND | DIMENSION | ASSEMBLY CLEARANCE| DIMENSION LIMITS | MAX. | | ITEM | MM (IN.) | MM (IN.) | MM (IN.) | ALLOW. | | NO. |-------------------|-------------------|---------|---------| CLEAR. | | | MIN. | MAX. | MIN. | MAX. | MIN. | MAX. |MM (IN.)| |--------|---------|---------|---------|---------|---------|---------|--------| | C | 15.836 | 15.854 | | | 15.820 | | | | OD 7 |(0.6234) |(0.6241) | | |(0.6228) | | | | | | | 0.008 | 0.039 | | | 0.071 | | | | | (0.0003)| (0.0015)| | |(0.0027)| | C | 15.862 | 15.875 | | | | 15.891 | | | ID 12 |(0.6244) |(0.6250) | | | |(0.6256) | | -------------------------------------------------------------------------------
1EFF : ALL 1 27-84-62Page 651 1 1 Feb 01/01R 1 1 1CES 1

 Subtask 27-84-62-220-103
 BE. Dimensional Check of Slat 4, Track 10
 (1) Fits and clearance dimensions
 NOTE : The limits on the chrome-plated surfaces only apply when there
____ is a layer of chrome on the bearing surfaces.
 -------------------------------------------------------------------------------| FIG. | ORIGINAL MANUFACTURING LIMITS | IN-SERVICE WEAR LIMITS | | DETAIL |---------------------------------------|----------------------------| | AND | DIMENSION | ASSEMBLY CLEARANCE| DIMENSION LIMITS | MAX. | | ITEM | MM (IN.) | MM (IN.) | MM (IN.) | ALLOW. | | NO. |-------------------|-------------------|---------|---------| CLEAR. | | | MIN. | MAX. | MIN. | MAX. | MIN. | MAX. |MM (IN.)| |--------|---------|---------|---------|---------|---------|---------|--------| | C | 18.959 | 18.980 | | | 18.927 | | | | OD 6 |(0.7464) |(0.7472) | | |(0.7451) | | | | | | | 0.027 | 0.069 | | | 0.133 | | | | | (0.0010)| (0.0027)| | |(0.0052)| | C | 19.007 | 19.028 | | | | 19.060 | | | ID 21 |(0.7483) |(0.7491) | | | |(0.7503) | | -------------------------------------------------------------------------------
Subtask 27-84-62-220-104
 BF. Dimensional Check of Slat 4, Track 10
 (1) Fits and clearance dimensions
 NOTE : The limits on the chrome-plated surfaces only apply when there
____ is a layer of chrome on the bearing surfaces.
 1EFF : ALL 1 27-84-62Page 652 1 1 Feb 01/01R 1 1 1CES 1

 -------------------------------------------------------------------------------
| FIG. | ORIGINAL MANUFACTURING LIMITS | IN-SERVICE WEAR LIMITS | | DETAIL |---------------------------------------|----------------------------| | AND | DIMENSION | ASSEMBLY CLEARANCE| DIMENSION LIMITS | MAX. | | ITEM | MM (IN.) | MM (IN.) | MM (IN.) | ALLOW. | | NO. |-------------------|-------------------|---------|---------| CLEAR. | | | MIN. | MAX. | MIN. | MAX. | MIN. | MAX. |MM (IN.)| |--------|---------|---------|---------|---------|---------|---------|--------| | C | 12.666 | 12.684 | | | 12.643 | | | | OD 4 |(0.4986) |(0.4993) | | |(0.4977) | | | | | | | 0.016 | 0.052 | | | 0.098 | | | | | (0.0006)| (0.0020)| | |(0.0038)| | C | 12.700 | 12.718 | | | | 12.741 | | | ID 8 |(0.5000) |(0.5007) | | | |(0.5016) | | -------------------------------------------------------------------------------
Subtask 27-84-62-220-105
 BG. Dimensional Check of Slat 5, Track 11
 (1) Fits and clearance dimensions
 NOTE : The limits on the chrome-plated surfaces only apply when there
____ is a layer of chrome on the bearing surfaces.
 -------------------------------------------------------------------------------| FIG. | ORIGINAL MANUFACTURING LIMITS | IN-SERVICE WEAR LIMITS | | DETAIL |---------------------------------------|----------------------------| | AND | DIMENSION | ASSEMBLY CLEARANCE| DIMENSION LIMITS | MAX. | | ITEM | MM (IN.) | MM (IN.) | MM (IN.) | ALLOW. | | NO. |-------------------|-------------------|---------|---------| CLEAR. | | | MIN. | MAX. | MIN. | MAX. | MIN. | MAX. |MM (IN.)| |--------|---------|---------|---------|---------|---------|---------|--------| | B | 9.497 | 9.512 | | | 9.472 | | | | OD 1 |(0.3738) |(0.3744) | | |(0.3729) | | | | | | | 0.023 | 0.053 | | | 0.108 | | | | | (0.0009)| (0.0020)| | |(0.0042)| | B | 9.535 | 9.550 | | | | 9.580 | | | ID 2 |(0.3753) |(0.3759) | | | |(0.3771) | | -------------------------------------------------------------------------------
1EFF : ALL 1 27-84-62Page 653 1 1 Feb 01/01R 1 1 1CES 1

 Subtask 27-84-62-220-106
 BH. Dimensional Check of Slat 5, Track 11
 (1) Fits and clearance dimensions
 NOTE : The limits on the chrome-plated surfaces only apply when there
____ is a layer of chrome on the bearing surfaces.
 -------------------------------------------------------------------------------| FIG. | ORIGINAL MANUFACTURING LIMITS | IN-SERVICE WEAR LIMITS | | DETAIL |---------------------------------------|----------------------------| | AND | DIMENSION | ASSEMBLY CLEARANCE| DIMENSION LIMITS | MAX. | | ITEM | MM (IN.) | MM (IN.) | MM (IN.) | ALLOW. | | NO. |-------------------|-------------------|---------|---------| CLEAR. | | | MIN. | MAX. | MIN. | MAX. | MIN. | MAX. |MM (IN.)| |--------|---------|---------|---------|---------|---------|---------|--------| | B | 9.497 | 9.512 | | | 9.488 | | | | OD 1 |(0.3738) |(0.3744) | | |(0.3735) | | | | | | | 0.000 | 0.028 | | | 0.046 | | | | | (0.0000)| (0.0011)| | |(0.0018)| | B | 9.512 | 9.525 | | | | 9.534 | | | ID 3 |(0.3744) |(0.3750) | | | |(0.3753) | | -------------------------------------------------------------------------------
　
中國航空網 www.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：A320飛機維護手冊 AMM FLIGHT CONTROLS 飛行操縱8(105)