(a)
Put the bolt (12) in the link (21) and install the links (14) and (21).
(b)
Install the eccentric bush (6), the bolt (15), the washer (5) and the nut (4). Tighten the nut (4) with your hand (this will be safetied when the Slat No. 3 is installed).
NOTE : The bolts (3) and (16) and their related nuts and washers
____ will be correctly installed when the Slat No. 3 is installed.
(8) For the Slat track 8, (Ref. Fig. 604/TASK 27-84-62-991-011) apply a layer of COMMON GREASE (Material No. 04-024) to:
-
the bolts (4), (11) and (20)
-
the eccentric bush (5)
-
the bearings (12) and (19).
1EFF : ALL 1 27-84-62Page 669 1 1 Feb 01/01R 1 1 1CES 1
(9) For the Slat track 8
(a)
Put the bolt (11) in the link (21) and install the links (13) and (21).
(b)
Install the eccentric bush (5), the bolt (4), the washer (14) and the nut (15). Tighten the nut (15) with your hand (this will be safetied when the Slat No. 3 is installed).
(c)
Install the two links (18), the bolts (20), the washers (16) and the nuts (17). Tighten the nuts (17) with your hand (these will be safetied when the Slat No. 3 is installed).
NOTE : The bolts (3) and their related nuts and washers will be
____ correctly installed when the Slat No. 3 is installed.
(10)
For the Slat track 9, (Ref. Fig. 605/TASK 27-84-62-991-012) apply a layer of COMMON GREASE (Material No. 04-024) to:
-
the bolts (13) and (16)
-
the eccentric bush (12)
-
the bearing (7).
(11)
For the Slat track 9
(a)
Put the bolt (16) in the link (8) and install the links (6) and (8).
(b)
Install the eccentric bush (12), the bolt (13), the washer (5) and the nut (4). Tighten the nut (4) with your hand (this will be safetied when the Slat No. 4 is installed).
NOTE : The bolts (1) and (17) and their related nuts and washers
____ will be correctly installed when the Slat No. 4 is installed.
(12)
For the Slat track 10, (Ref. Fig. 606/TASK 27-84-62-991-013) apply a layer of COMMON GREASE (Material No. 04-024) to:
-
the bolts (4), (11) and (20)
-
the eccentric bush (5)
-
the bearings (12) and (19).
(13)
For the Slat track 10
(a) Put the bolt (11) in the link (21) and install the links (13) and (21).
1EFF : ALL 1 27-84-62Page 670 1 1 Feb 01/01R 1 1 1CES 1
(b)
Install the eccentric bush (5), the bolt (4), the washer (14) and the nut (15). Tighten the nut (15) with your hand (this will be safetied when the Slat No. 4 is installed).
(c)
Install the two links (18), the bolts (20), the washers (16) and the nuts (17). Tighten the nuts (17) with your hand (these will be safetied when the Slat No. 4 is installed).
NOTE : The bolts (3) and their related nuts and washers will be
____ correctly installed when the Slat No. 4 is installed.
(14) For the Slat track 11,
**ON A/C 001-049, 051-061, 101-105, 201-203,
(Ref. Fig. 607/TASK 27-84-62-991-014)
R **ON A/C 062-099, 106-149, 151-199, 204-299, 301-399, 401-499,
(Ref. Fig. 607A/TASK 27-84-62-991-014-A)
**ON A/C ALL
apply a layer of COMMON GREASE (Material No. 04-024) to:
-
the bolts (8) and (12)
-
the eccentric bush (11)
-
the bearing (7).
(15) For the Slat track 11
(a)
Put the bolt (8) in the link (16) and install the links (4) and (16).
(b)
Install the eccentric bush (11), the bolt (12), the washer (6) and the nut (5). Tighten the nut (5) with your hand (this will be safetied when the Slat No. 5 is installed).
NOTE : The bolts (1) and (20) and their related nuts and washers
____ will be correctly installed when the Slat No. 5 is installed.
(16)
For the Slat track 12,
(Ref. Fig. 608/TASK 27-84-62-991-015)
apply a layer of COMMON GREASE (Material No. 04-024) to:
-
the bolts (25), (28), (29) and (30)
-
the eccentric bush (24)
-
the bearings (7), (15) and (19).
(17)
For the Slat track 12
(a)
Put the bolt (28) in the link (20) and install the links (18) and (20).
(b)
Install the eccentric bush (24), the bolt (25), the washer (17) and the nut (16). Tighten the nut (16) with your hand (this will be safetied when the Slat No. 5 is installed).
中國航空網 www.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：A320飛機維護手冊 AMM FLIGHT CONTROLS 飛行操縱8(111)
