Subtask 27-84-61-220-067
R. Dimensional Check of the Slat-to-Track Attachment Fittings, Track 1 thru 4
(1) Fits and clearance dimensions
NOTE : The limits on the chrome-plated surfaces only apply when there
____ is a layer of chrome on the bearing surfaces.
-------------------------------------------------------------------------------| FIG. | ORIGINAL MANUFACTURING LIMITS | IN-SERVICE WEAR LIMITS | | DETAIL |---------------------------------------|----------------------------| | AND | DIMENSION | ASSEMBLY CLEARANCE| DIMENSION LIMITS | MAX. | | ITEM | MM (IN.) | MM (IN.) | MM (IN.) | ALLOW. | | NO. |-------------------|-------------------|---------|---------| CLEAR. | | | MIN. | MAX. | MIN. | MAX. | MIN. | MAX. |MM (IN.)| |--------|---------|---------|---------|---------|---------|---------|--------| | B | 22.189 | 22.210 | | | 22.176 | | | | OD 11 |(0.8735) |(0.8744) | | |(0.8730) | | | | | | | 0.002 | 0.036 | | | 0.062 | | | | | (0.0000*| (0.0014*| | |(0.0024*| | B | 22.212 | 22.225 | | | | 22.238 | | | ID 5 |(0.8744) |(0.8750) | | | |(0.8755) | | ********** DIFFERENCE IN IN. MARKED BY A STAR IS TRUNCATED **********
Subtask 27-84-61-220-068
S. Dimensional Check of the Slat-to-Track Attachment Fittings, Track 1 thru 4
(1) Fits and clearance dimensions
NOTE : The limits on the chrome-plated surfaces only apply when there
____ is a layer of chrome on the bearing surfaces.
1EFF : ALL 1 27-84-61Page 617 1 1 Feb 01/01R 1 1 1CES 1
-------------------------------------------------------------------------------
| FIG. | ORIGINAL MANUFACTURING LIMITS | IN-SERVICE WEAR LIMITS | | DETAIL |---------------------------------------|----------------------------| | AND | DIMENSION | ASSEMBLY CLEARANCE| DIMENSION LIMITS | MAX. | | ITEM | MM (IN.) | MM (IN.) | MM (IN.) | ALLOW. | | NO. |-------------------|-------------------|---------|---------| CLEAR. | | | MIN. | MAX. | MIN. | MAX. | MIN. | MAX. |MM (IN.)| |--------|---------|---------|---------|---------|---------|---------|--------| | B | 25.959 | 25.980 | | | 25.927 | | | | OD 12 |(1.0220) |(1.0228) | | |(1.0207) | | | | | | | 0.027 | 0.069 | | | 0.133 | | | | | (0.0010)| (0.0027)| | |(0.0052)| | B | 26.007 | 26.028 | | | | 26.060 | | | ID 9 |(1.0238) |(1.0247) | | | |(1.0259) | | -------------------------------------------------------------------------------
Subtask 27-84-61-220-069
T. Dimensional Check of the Slat-to-Track Attachment Fittings, Track 1 thru 4
(1) Fits and clearance dimensions
NOTE : The limits on the chrome-plated surfaces only apply when there
____ is a layer of chrome on the bearing surfaces.
-------------------------------------------------------------------------------| FIG. | ORIGINAL MANUFACTURING LIMITS | IN-SERVICE WEAR LIMITS | | DETAIL |---------------------------------------|----------------------------| | AND | DIMENSION | ASSEMBLY CLEARANCE| DIMENSION LIMITS | MAX. | | ITEM | MM (IN.) | MM (IN.) | MM (IN.) | ALLOW. | | NO. |-------------------|-------------------|---------|---------| CLEAR. | | | MIN. | MAX. | MIN. | MAX. | MIN. | MAX. |MM (IN.)| |--------|---------|---------|---------|---------|---------|---------|--------| | B | 17.966 | 17.984 | | | 17.943 | | | | OD 14 |(0.7073) |(0.7080) | | |(0.7064) | | | | | | | 0.016 | 0.052 | | | 0.098 | | | | | (0.0006)| (0.0020)| | |(0.0038)| | B | 18.000 | 18.018 | | | | 18.041 | | | ID 10 |(0.7086) |(0.7093) | | | |(0.7102) | | -------------------------------------------------------------------------------
1EFF : ALL 1 27-84-61Page 618 1 1 Feb 01/01R 1 1 1CES 1
Subtask 27-84-61-220-070
U. Dimensional Check of the Slat-to-Track Attachment Fittings, Track 1 thru 4
(1) Fits and clearance dimensions
NOTE : The limits on the chrome-plated surfaces only apply when there
____ is a layer of chrome on the bearing surfaces.
中國航空網(wǎng) www.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：A320飛機維護手冊 AMM FLIGHT CONTROLS 飛行操縱8(75)
