曝光臺 注意防騙 網曝天貓店富美金盛家居專營店坑蒙拐騙欺詐消費者

 G. Dimensional Check of the Slat-to-Track Attachment Fittings, Track 1 thru 4
 (1) Fits and clearance dimensions
 NOTE : The limits on the chrome-plated surfaces only apply when there
____ is a layer of chrome on the bearing surfaces.
 -------------------------------------------------------------------------------| FIG. | ORIGINAL MANUFACTURING LIMITS | IN-SERVICE WEAR LIMITS | | DETAIL |---------------------------------------|----------------------------| | AND | DIMENSION | ASSEMBLY CLEARANCE| DIMENSION LIMITS | MAX. | | ITEM | MM (IN.) | MM (IN.) | MM (IN.) | ALLOW. | | NO. |-------------------|-------------------|---------|---------| CLEAR. | | | MIN. | MAX. | MIN. | MAX. | MIN. | MAX. |MM (IN.)| |--------|---------|---------|---------|---------|---------|---------|--------| | C | 19.009 | 19.030 | | | 18.977 | | | | OD 32 |(0.7483) |(0.7492) | | |(0.7471) | | | | | | | 0.027 | 0.069 | | | 0.133 | | | | | (0.0010)| (0.0027)| | |(0.0052)| | C | 19.057 | 19.078 | | | | 19.110 | | | ID 14 |(0.7502) |(0.7511) | | | |(0.7523) | | -------------------------------------------------------------------------------
Subtask 27-84-61-220-059
 H. Dimensional Check of the Slat-to-Track Attachment Fittings, Track 1 thru 4
 (1) Fits and clearance dimensions
 NOTE : The limits on the chrome-plated surfaces only apply when there
____ is a layer of chrome on the bearing surfaces.
 1EFF : ALL 1 27-84-61Page 611 1 1 Feb 01/01R 1 1 1CES 1

 -------------------------------------------------------------------------------
| FIG. | ORIGINAL MANUFACTURING LIMITS | IN-SERVICE WEAR LIMITS | | DETAIL |---------------------------------------|----------------------------| | AND | DIMENSION | ASSEMBLY CLEARANCE| DIMENSION LIMITS | MAX. | | ITEM | MM (IN.) | MM (IN.) | MM (IN.) | ALLOW. | | NO. |-------------------|-------------------|---------|---------| CLEAR. | | | MIN. | MAX. | MIN. | MAX. | MIN. | MAX. |MM (IN.)| |--------|---------|---------|---------|---------|---------|---------|--------| | C | 19.009 | 19.030 | | | 18.993 | | | | OD 32 |(0.7483) |(0.7492) | | |(0.7477) | | | | | | | 0.007 | 0.041 | | | 0.073 | | | | | (0.0002)| (0.0016)| | |(0.0028)| | C | 19.037 | 19.050 | | | | 19.066 | | | ID 13 |(0.7494) |(0.7500) | | | |(0.7506) | | -------------------------------------------------------------------------------
Subtask 27-84-61-220-060
 J. Dimensional Check of the Slat-to-Track Attachment Fittings, Track 1 thru 4
 (1) Fits and clearance dimensions
 NOTE : The limits on the chrome-plated surfaces only apply when there
____ is a layer of chrome on the bearing surfaces.
 -------------------------------------------------------------------------------| FIG. | ORIGINAL MANUFACTURING LIMITS | IN-SERVICE WEAR LIMITS | | DETAIL |---------------------------------------|----------------------------| | AND | DIMENSION | ASSEMBLY CLEARANCE| DIMENSION LIMITS | MAX. | | ITEM | MM (IN.) | MM (IN.) | MM (IN.) | ALLOW. | | NO. |-------------------|-------------------|---------|---------| CLEAR. | | | MIN. | MAX. | MIN. | MAX. | MIN. | MAX. |MM (IN.)| |--------|---------|---------|---------|---------|---------|---------|--------| | C | 17.966 | 17.984 | | | 17.943 | | | | OD 28 |(0.7073) |(0.7080) | | |(0.7064) | | | | | | | 0.016 | 0.052 | | | 0.098 | | | | | (0.0006)| (0.0020)| | |(0.0038)| | C | 18.000 | 18.018 | | | | 18.041 | | | ID 17 |(0.7086) |(0.7093) | | | |(0.7102) | | -------------------------------------------------------------------------------
1EFF : ALL 1 27-84-61Page 612 1 1 Feb 01/01R 1 1 1CES 1

 Subtask 27-84-61-220-061
 K. Dimensional Check of the Slat-to-Track Attachment Fittings, Track 1 thru 4
 (1) Fits and clearance dimensions
 NOTE : The limits on the chrome-plated surfaces only apply when there
____ is a layer of chrome on the bearing surfaces.
 -------------------------------------------------------------------------------| FIG. | ORIGINAL MANUFACTURING LIMITS | IN-SERVICE WEAR LIMITS | | DETAIL |---------------------------------------|----------------------------| | AND | DIMENSION | ASSEMBLY CLEARANCE| DIMENSION LIMITS | MAX. | | ITEM | MM (IN.) | MM (IN.) | MM (IN.) | ALLOW. | | NO. |-------------------|-------------------|---------|---------| CLEAR. | | | MIN. | MAX. | MIN. | MAX. | MIN. | MAX. |MM (IN.)| |--------|---------|---------|---------|---------|---------|---------|--------| | C | 22.189 | 22.210 | | | 22.176 | | | | OD 25 |(0.8735) |(0.8744) | | |(0.8730) | | | | | | | 0.002 | 0.036 | | | 0.062 | | | | | (0.0000*| (0.0014*| | |(0.0024*| | C | 22.212 | 22.225 | | | | 22.238 | | | ID 21 |(0.8744) |(0.8750) | | | |(0.8755) | | ********** DIFFERENCE IN IN. MARKED BY A STAR IS TRUNCATED **********
 Subtask 27-84-61-220-062
 L. Dimensional Check of the Slat-to-Track Attachment Fittings, Track 1 thru 4
 (1) Fits and clearance dimensions
　
中國航空網 www.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：A320飛機維護手冊 AMM FLIGHT CONTROLS 飛行操縱8(73)