曝光臺 注意防騙 網曝天貓店富美金盛家居專營店坑蒙拐騙欺詐消費者

 Subtask 27-84-62-220-116
 BT. Dimensional Check of Slat 5, Track 12
 (1) Fits and clearance dimensions
 NOTE : The limits on the chrome-plated surfaces only apply when there
____ is a layer of chrome on the bearing surfaces.
 1EFF : ALL 1 27-84-62Page 660 1 1 Feb 01/01R 1 1 1CES 1

 -------------------------------------------------------------------------------
| FIG. | ORIGINAL MANUFACTURING LIMITS | IN-SERVICE WEAR LIMITS | | DETAIL |---------------------------------------|----------------------------| | AND | DIMENSION | ASSEMBLY CLEARANCE| DIMENSION LIMITS | MAX. | | ITEM | MM (IN.) | MM (IN.) | MM (IN.) | ALLOW. | | NO. |-------------------|-------------------|---------|---------| CLEAR. | | | MIN. | MAX. | MIN. | MAX. | MIN. | MAX. |MM (IN.)| |--------|---------|---------|---------|---------|---------|---------|--------| | B | 11.079 | 11.097 | | | 11.067 | | | | OD 6 |(0.4361) |(0.4368) | | |(0.4357) | | | | | | | 0.003 | 0.034 | | | 0.058 | | | | | (0.0001)| (0.0013)| | |(0.0022)| | B | 11.100 | 11.113 | | | | 11.125 | | | ID 1 |(0.4370) |(0.4375) | | | |(0.4379) | | -------------------------------------------------------------------------------
Subtask 27-84-62-220-117
 BU. Dimensional Check of Slat 5, Track 12
 (1) Fits and clearance dimensions
 NOTE : The limits on the chrome-plated surfaces only apply when there
____ is a layer of chrome on the bearing surfaces.
 -------------------------------------------------------------------------------| FIG. | ORIGINAL MANUFACTURING LIMITS | IN-SERVICE WEAR LIMITS | | DETAIL |---------------------------------------|----------------------------| | AND | DIMENSION | ASSEMBLY CLEARANCE| DIMENSION LIMITS | MAX. | | ITEM | MM (IN.) | MM (IN.) | MM (IN.) | ALLOW. | | NO. |-------------------|-------------------|---------|---------| CLEAR. | | | MIN. | MAX. | MIN. | MAX. | MIN. | MAX. |MM (IN.)| |--------|---------|---------|---------|---------|---------|---------|--------| | B | 9.497 | 9.512 | | | 9.472 | | | | OD 5 |(0.3738) |(0.3744) | | |(0.3729) | | | | | | | 0.023 | 0.053 | | | 0.103 | | | | | (0.0009)| (0.0020)| | |(0.0040)| | B | 9.535 | 9.550 | | | | 9.575 | | | ID 3 |(0.3753) |(0.3759) | | | |(0.3769) | | -------------------------------------------------------------------------------
1EFF : ALL 1 27-84-62Page 661 1 1 Feb 01/01R 1 1 1CES 1

 Subtask 27-84-62-220-118
 BV. Dimensional Check of Slat 5, Track 12
 (1) Fits and clearance dimensions
 NOTE : The limits on the chrome-plated surfaces only apply when there
____ is a layer of chrome on the bearing surfaces.
 -------------------------------------------------------------------------------| FIG. | ORIGINAL MANUFACTURING LIMITS | IN-SERVICE WEAR LIMITS | | DETAIL |---------------------------------------|----------------------------| | AND | DIMENSION | ASSEMBLY CLEARANCE| DIMENSION LIMITS | MAX. | | ITEM | MM (IN.) | MM (IN.) | MM (IN.) | ALLOW. | | NO. |-------------------|-------------------|---------|---------| CLEAR. | | | MIN. | MAX. | MIN. | MAX. | MIN. | MAX. |MM (IN.)| |--------|---------|---------|---------|---------|---------|---------|--------| | B | 9.497 | 9.512 | | | 9.488 | | | | OD 5 |(0.3738) |(0.3744) | | |(0.3735) | | | | | | | 0.000 | 0.028 | | | 0.046 | | | | | (0.0000)| (0.0011)| | |(0.0018)| | B | 9.512 | 9.525 | | | | 9.534 | | | ID 4 |(0.3744) |(0.3750) | | | |(0.3753) | | -------------------------------------------------------------------------------
Subtask 27-84-62-220-119
 BW. Dimensional Check of Slat 5, Track 12
 (1) Fits and clearance dimensions
 NOTE : The limits on the chrome-plated surfaces only apply when there
____ is a layer of chrome on the bearing surfaces.
 1EFF : ALL 1 27-84-62Page 662 1 1 Feb 01/01R 1 1 1CES 1

 -------------------------------------------------------------------------------
| FIG. | ORIGINAL MANUFACTURING LIMITS | IN-SERVICE WEAR LIMITS | | DETAIL |---------------------------------------|----------------------------| | AND | DIMENSION | ASSEMBLY CLEARANCE| DIMENSION LIMITS | MAX. | | ITEM | MM (IN.) | MM (IN.) | MM (IN.) | ALLOW. | | NO. |-------------------|-------------------|---------|---------| CLEAR. | | | MIN. | MAX. | MIN. | MAX. | MIN. | MAX. |MM (IN.)| |--------|---------|---------|---------|---------|---------|---------|--------| | C | 9.497 | 9.512 | | | 9.472 | | | | OD 30 |(0.3738) |(0.3744) | | |(0.3729) | | | | | | | 0.023 | 0.053 | | | 0.103 | | | | | (0.0009)| (0.0020)| | |(0.0040)| | C | 9.535 | 9.550 | | | | 9.575 | | | ID 9 |(0.3753) |(0.3759) | | | |(0.3769) | | -------------------------------------------------------------------------------
Subtask 27-84-62-220-120
 BX. Dimensional Check of Slat 5, Track 12
 (1) Fits and clearance dimensions
 NOTE : The limits on the chrome-plated surfaces only apply when there
　
中國航空網 www.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：A320飛機維護手冊 AMM FLIGHT CONTROLS 飛行操縱8(108)