(Ref. Fig. 402/TASK 27-84-63-991-002) R **ON A/C 062-099, 106-149, 151-199, 204-299, 301-399, 401-499,
 (Ref. Fig. 402A/TASK 27-84-63-991-002-A)
 **ON A/C ALL

 (Ref. Fig. 403/TASK 27-84-63-991-003)

 Slat No. 1 - Location and General Configuration Figure 401/TASK 27-84-63-991-001 
R 1EFF : 1 1 1CES  ALL  1 111 27-84-63 Page 406 Nov 01/03

 Slat Attachment at the No. 1 and 2 Slat Tracks
 Figure 402/TASK 27-84-63-991-002

R 1EFF : 001-049, 051-061, 101-105, 201-203, 1 27-84-63Page 407 1 1 May 01/05 1 1 1CES 1

 Slat Attachment at the No. 1 and 2 Slat Tracks
 Figure 402A/TASK 27-84-63-991-002-A12 (SHEET 1)

R 1EFF : 062-099, 106-149, 151-199, 204-299, 1 27-84-63Page 408 1301-399, 401-499, 1Aug 01/05 1 1 1CES 1

 Slat Attachment at the No. 1 and 2 Slat Tracks
 Figure 402A/TASK 27-84-63-991-002-A22 (SHEET 2)

R 1EFF : 062-099, 106-149, 151-199, 204-299, 1 27-84-63Page 409 1301-399, 401-499, 1Aug 01/05 1 1 1CES 1

 Slat Attachment at the No's 3 and 4 Slat Tracks Figure 403/TASK 27-84-63-991-003
 1EFF : 1 1R 1CES  ALL  1 11 1 27-84-63 Page 410 Aug 01/03

R **ON A/C 001-049, 051-061, 101-105, 201-203,
 Subtask 27-84-63-020-051
 A. Removal of the No. 1 Slat
 (1)
 Lift the SLING-SLATS sufficiently, until it has the weight of the slat.

 (2)
 Disconnect the slat-to-track bonding lead at the No. 1 Slat Track:

 (a)
 Remove and discard the lockwire from the bolt (8).

 (b)
 Remove the nut (1) and the bonding strap (2) from the bolt (8) but do not remove the bolt (8). Install the nut (1) on the bolt (8).

 (3)
 At the No. 1, 2, 3 and 4 slat tracks:

 (a)
 Remove and discard the cotter pins (5) from the nuts (18), (19),

 (20)
 and (42).

 (b)
 Loosen the nuts (18), (19), (20) and (42) but do not remove them.

 (c)
 Remove and discard the cotter pins (5) from the nuts (4), (6),

 (31)
 and (32).

 (d)
 Remove the items that follow:

 -
the nuts (4), (6), (31) and (32)

 -
the washers (3), (7), (30) and (33)

 -
the bolts (16), (17), (39) and (41)

 -
the bush (34).

 (4)
 Lift the slat (41 kg (90.3895 lb)) from the slat tracks.

 (5)
 Move the slat with the hoist and lower it onto the support strut.

R 1EFF : 001-049, 051-061, 101-105, 201-203, 1 27-84-63Page 411 1 1 May 01/05 1 1 1CES 1R **ON A/C 062-099, 106-149, 151-199, 204-299, 301-399, 401-499,

 Subtask 27-84-63-020-051-A
 A. Removal of the No. 1 Slat
 (1)
 Lift the SLING-SLATS sufficiently, until it has the weight of the slat.

 (2)
 Disconnect the slat-to-track bonding lead at the No. 1 Slat Track:

 (a)
 Remove and discard the lockwire from the bolt (8).

 (b)
 Remove the nut (1) and the bonding strap (2) from the bolt (8) but do not remove the bolt (8). Install the nut (1) on the bolt (8).

 (3)
 At the No. 1 slat track:

 (a)
 Remove and discard the cotter pins (5) from the nuts (18), (19), and (20).

 (b)
 Loosen the nuts (18), (19), and (20) but do not remove them.

 (c)
 Remove and discard the cotter pins (5) from the nuts (4) and (6).

 (d)
 Remove the items that follow:

 -
the nuts (4) and (6)

 -
the washers (3) and (7)

 -
the bolts (16) and (17).

 (4)
 At the No. 2 slat track:

 (a)
 Remove and discard the cotter pins (4) from the nuts (17), (18), and (19).

 (b)
 Loosen the nuts (17), (18), and (19) but do not remove them.

 (c)
 Remove and discard the cotter pins (4) from the nuts (3) and (5).

 (d)
 Remove:

 -
the nuts (3) and (5)

 -
the washers (2) and (6)

 -
the bolts (15) and (16).

R 1EFF : 062-099, 106-149, 151-199, 204-299, 1 27-84-63Page 412 1301-399, 401-499, 1Aug 01/05 1 1 1CES 1

 (5)
 At the No. 3 and 4 slat tracks:

 (a)
 Remove and discard the cotter pins (5) from the nuts (42).

 (b)
 Loosen the nuts (42) but do not remove them.

 (c)
 Remove and discard the cotter pins (5) from the nuts (31) and (32).
　
中國航空網 www.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：A320飛機維護手冊 AMM FLIGHT CONTROLS 飛行操縱8(115)