EFF : ALL
53-15-11Page 804
SCUFF PLATES - DOOR ENTRANCE - REMOVAL/INSTALLATION
___________________________________________________ TASK 53-15-15-000-001 Removal of the FWD Passenger/Crew Door Scuff Plates
1.
Reason for the Job
__________________
Self Explanatory
2.
Job Set-up Information
______________________
A. Fixtures, Tools, Test and Support Equipment
-------------------------------------------------------------------------------REFERENCE QTY DESIGNATION -------------------------------------------------------------------------------
No specific non metallic scraper No specific non metallic wedge No specific access platform 4.00 m (13 ft. 1 in.)
B. Referenced Information
-------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
52-10-00-010-001 Opening of the Passenger/Crew Door 53-15-15-991-001 Fig. 401
3. Job Set-up
__________ Subtask 53-15-15-941-050
A. Get Access
(1)
Put the access platform in zone 831 or 841.
(2)
Open the applicable FWD passenger/crew door 831 or 841 (Ref. TASK 52-10-00-010-001).
EFF : ALL
53-15-15Page 401
Aug 01/01
R
CES 4. Procedure
_________
Subtask 53-15-15-020-050
A. Removal of the Scuff Plates
(Ref. Fig. 401/TASK 53-15-15-991-001)
CAUTION : MAKE SURE THAT YOU DO NOT DAMAGE THE FUSELAGE WHEN YOU REMOVE
_______
THE SCUFF PLATES.
R NOTE : The scuff plates can become damaged during the subsequent removal
____ R procedure.
(1)
Remove the screws (1) and the cover strip (2).
(2)
Remove the sealant between the scuff plates (3) (5) and (9) with a non metallic scraper.
(3)
Remove the screws (6) and (8), the nuts (4), and the washers (7) from the scuff plates (3), (5) and (9).
(4)
Blow air on the scuff plates (3), (5) and (9) with a hot air blower. NOTE : Do not let the temperature of the scuff plates increase by
____ more than 100 +50 -0 deg.C (212.00 +90.00 -0.00 deg.F).
(5)
Carefully put a non metallic wedge between the fuselage and the scuff plates (3), (5) and (9).
(6)
Remove the scuff plates (3), (5) and (9). NOTE : If the scuff plates (3), (5) and (9) are damaged, discard
____
them.
EFF : ALL
53-15-15Page 402
R FWD Passenger/Crew Door Scuff Plate Figure 401/TASK 53-15-15-991-001
EFF : ALL 53-15-15 Page 403 Nov 01/00
CES
TASK 53-15-15-400-001
Installation of the FWD Passenger/Crew Door Scuff Plates
1. Reason for the Job
__________________
Self Explanatory
2. Job Set-up Information
______________________
A. Fixtures, Tools, Test and Support Equipment
-------------------------------------------------------------------------------REFERENCE QTY DESIGNATION -------------------------------------------------------------------------------
No specific scotch brite
No specific vacuum pump
No specific vacuum valve
B. Consumable Materials
-------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
No specific adhesive tape
No specific porous material
Material No. 05-013A C Z-24.223
RELEASE AGENT (Ref. 20-31-00) Material No. 05-068 D 80-T-31-2910 VACUUM FOIL (Ref. 20-31-00) Material No. 08-065 USA MIL-T-60394 TYPE I CLASS I DOUBLE SIDED ADHESIVE TAPE (Ref. 20-31-00) Material No. 09-005 USA MIL-S-81733 CLASS C CORROSION INHIBITIVE INTERFAY SEALANT (Ref. 20-31-00)
Material No. 09-016 USA MIL-PRF-81733D TYPE II CLASS B
CORROSION INHIBITING FILLET CONSISTENCY
(Ref. 20-31-00)
Material No. 09-030 D 80-T-50-4005 SEAL TAPE (Ref. 20-31-00) R Material No. 11-003 USA ASTM D 740 METHYL-ETHYL-KETONE (Ref. 20-31-00) Material No. 19-003 USA AMS 3819 LINT-FREE COTTON CLOTH (Ref. 20-31-00)
EFF : ALL
中國航空網 www.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：A320飛機維護手冊 AMM FUSELAGE 機身1(116)
