曝光臺 注意防騙 網曝天貓店富美金盛家居專營店坑蒙拐騙欺詐消費者

R  A. Get Access 
R  (1) Put an access platform in position at the zones 211 and 212. 
R  Subtask 53-11-00-110-116 
R  B. Cleaning of the Structure 
R  WARNING : USE SOLVENTS/CLEANING AGENTS, SEALANTS AND OTHER SPECIAL_______ 
R  MATERIALS ONLY WITH A GOOD SUPPLY OF AIR. 
R  OBEY THE MANUFACTURERS INSTRUCTIONS. 
R  PUT ON PROTECTIVE CLOTHING. 
R  DO NOT GET THEM IN YOUR MOUTH. 
R  DO NOT SMOKE. 
R  DO NOT BREATHE THE GAS. 
R  THESE MATERIALS ARE POISONOUS, FLAMMABLE AND SKIN IRRITANT. 
R  GET MEDICAL HELP IF YOUR SKIN OR EYES BECOME IRRITATED. 
R  (1) Clean the inspection area with CLEANING AGENTS (Material No. 11-004) 
R  and a lint-free cotton cloth MISCELLANEOUS (Material No. 19-003), if 
R  necessary. 
R  4. Procedure_________ 
R  Subtask 53-11-00-210-090 
R  A. Inspection 
R  (Ref. Fig. 606/TASK 53-11-00-991-079) 
R  (1) Do a visual inspection of the external surface of the fuselage side 
R  panel, below the cockpit side windows. This inspection is applicable 
R  between FR1 and FR12, left and right sides. 
R  (2) Make sure that there is no: 
R  (a) Corrosion damage: 
R  - If you find corrosion damage, refer to the Structural Repair 
R  Manual (Ref. SRM 512200 P.Block 001) for types, inspection, 
R  removal and corrosion protection.

 EFF : ALL

53-11-00Page 624
May 01/03

R Fuselage Side Panel below Cockpit Side Windows - External Surface R Figure 606/TASK 53-11-00-991-079
 EFF : ALL

53-11-00Page 625
May 01/03 CES

R  (b) Other damage (cracks, scratches, stress, marks, dents, 
R  bumps,...): 
R  - If you find other damage, refer to the Structural Repair Manual 
R  (Ref. SRM 511100 P.Block 001) for damage classification and 
R  corrective action. 
R  5. Close-up________ 
R  Subtask 53-11-00-942-093 
R  A. Close Access 
R  (1) Make sure that the work area is clean and clear of tool(s) and other 
R  items. 
R  (2) Remove the access platform(s).

 EFF : ALL

53-11-00Page 626
May 01/03

R  TASK 53-11-00-210-811 
R  General Visual Inspection of Area Forward of Windshield, above Side Panel, from 
R  FR 0 to FR 4, External Surface, LH/RH 
R  1. Reason for the Job__________________ 
R  Refer to the MPD TASK: 531118-01 
R  2. Job Set-up Information______________________ 
R  A. Fixtures, Tools, Test and Support Equipment 
R  -------------------------------------------------------------------------------
R  REFERENCE QTY DESIGNATION 
R  -------------------------------------------------------------------------------
R  No specific access platform 3.5 m (11 ft. 6 in.) 
R  B. Consumable Materials 
R  -------------------------------------------------------------------------------
R  REFERENCE DESIGNATION 
R  -------------------------------------------------------------------------------
R  Material No. 11-004 USA MIL-T-81533 
R  1.1.1TRICHLOROETHANE (METHYL CHLOROFORM) 
R  (Ref. 20-31-00) 
R  Material No. 19-003 USA AMS 3819 
R  LINT-FREE COTTON CLOTH (Ref. 20-31-00) 
R  C. Referenced Information 
R  -------------------------------------------------------------------------------
R  REFERENCE DESIGNATION 
R  -------------------------------------------------------------------------------
R  SRM 511100 P.Block 001 (for corrective action) 
R  SRM 512200 P.Block 001 (for corrective action) 
R  53-11-00-991-080 Fig. 607

 EFF : ALL

53-11-00Page 627
May 01/03

R  3. Job Set-up__________ 
R  Subtask 53-11-00-941-087 
R  A. Get Access 
R  (1) Put an access platform in position at the zones 211 and 212. 
R  Subtask 53-11-00-110-117 
R  B. Cleaning of the Structure 
R  WARNING : USE SOLVENTS/CLEANING AGENTS, SEALANTS AND OTHER SPECIAL_______ 
R  MATERIALS ONLY WITH A GOOD SUPPLY OF AIR. 
R  OBEY THE MANUFACTURERS INSTRUCTIONS. 
　
中國航空網 www.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：A320飛機維護手冊 AMM FUSELAGE 機身1(42)