-------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
R R SRM 511100 P.Block 001 SRM 512200 P.Block 001 53-11-00-991-058 53-11-00-991-059 (for corrective action)(for corrective action) Fig. 649 Fig. 650
3. Job Set-up__________
Subtask 53-11-00-010-081
A. Get Access
R (Ref. Fig. 649/TASK 53-11-00-991-058)
R (1) Put an access platform in position at the zone 811.
R R (2) Open the avionics-compartment door 811 (Ref. TASK 52-41-00-010-002).
R (3) Open the forward passenger/crew Door 831 (841) (Ref. TASK 52-10-00-010-001).
R R R (4) Remove the linings around the cockpit windows: 211GW, 211DW, 211PW, 211NW, 211LW, 211MW, 211KC, 211AC, 211LC, 211MC, 212LC, 212AC, 212KC, 212NW, 212PW, 212DW, 212KW, 212GW, (Ref. TASK 25-13-41-000-001), (Ref. TASK 25-13-41-000-002).
R (5) Remove the insulation blankets (Ref. TASK 25-80-00-000-001).
R (6) Move the electrical devices.
Subtask 53-11-00-110-095
B. Cleaning of the Structure
WARNING : USE SOLVENTS/CLEANING AGENTS, SEALANTS AND OTHER SPECIAL_______ MATERIALS ONLY WITH A GOOD SUPPLY OF AIR. OBEY THE MANUFACTURERS INSTRUCTIONS. PUT ON PROTECTIVE CLOTHING. DO NOT GET THEM IN YOUR MOUTH. DO NOT SMOKE. DO NOT BREATHE THE GAS. THESE MATERIALS ARE POISONOUS, FLAMMABLE AND SKIN IRRITANT. GET MEDICAL HELP IF YOUR SKIN OR EYES BECOME IRRITATED.
CES
R R Cockpit Lining Panels Figure 649/TASK 53-11-00-991-058
EFF : ALL 53-11-00 Page A693 Aug 01/03
CES
R R R (1) Clean the inspection area with CLEANING AGENTS (Material No. 11-004) and a lint-free cotton cloth MISCELLANEOUS (Material No. 19-003), if necessary.
4. Procedure_________
Subtask 53-11-00-220-061
R A. Inspection (Ref. Fig. 650/TASK 53-11-00-991-059)
R R (1) Do a detailed inspection of the structure of the cockpit window frames and closing panels (up to FR12).
(2) Make sure that there is no:
R R R (a) Corrosion damage: - If you find corrosion damage, refer to the Structural Repair Manual (Ref. SRM 512200 P.Block 001) for types of corrosion, inspection, removal and corrosion protection.
R R R (b) Other damage (cracks, scratches, stress, marks, dents, bumps ...): - If you find other damage, refer to the Structural Repair Manual (Ref. SRM 511100 P.Block 001) for damage classification and corrective action .
5. Close-up________
Subtask 53-11-00-410-081
A. Close Access
R (1) Put the electrical devices back in position.
(2) Install the insulation blankets (Ref. TASK 25-80-00-400-001).
R R R (3) Install the lining panels around the cockpit windows 211GW, 211DW, 211PW, 211NW, 211LW, 211MW, 211KC, 211AC, 211LC, 211MC, 212LC, 212AC, 212KC, 212NW, 212PW, 212DW, 212KW, 212GW, (Ref. TASK 25-13-41-400-001), (Ref. TASK 25-13-41-400-002).
(4) Make sure that the work area is clean and clear of tool(s) and other items.
R (5) Close the forward passenger/crew Door 831 (841) (Ref. TASK 52-10-00-410-001).
CES
R Cockpit Window Frames Figure 650/TASK 53-11-00-991-059
EFF : ALL 53-11-00 Page A695 Aug 01/03
CES
R (6) Close the avionics-compartment door 811 (Ref. TASK 52-41-00-410-002). R (7) Remove the access platform(s).
TASK 53-11-00-210-048
R Detailed Inspection of Cockpit Floor Structure, between FR 1 and FR 12
1. Reason for the Job__________________
Refer to the MPD TASK: 531188-01
2. Job Set-up Information______________________
A. Fixtures, Tools, Test and Support Equipment
-------------------------------------------------------------------------------REFERENCE QTY DESIGNATION -------------------------------------------------------------------------------
R No specific access platform 3.5 m (11 ft. 6 in.)
B. Consumable Materials
-------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
中國航空網 www.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：A320飛機維護手冊 AMM FUSELAGE 機身1(76)
