__________ Subtask 53-21-00-941-055
A. Get Access
(1) Put an access platform in position at the zone 831 (841).
(2)
Open the forward passenger/crew door (Ref. TASK 52-10-00-010-001). Subtask 53-21-00-010-052
B. Removal of the Components
(1) Remove the ceiling panels 231BC, 231CC (Ref. TASK 25-23-41-000-001).
(2)
Remove the insulation blankets (Ref. TASK 25-80-00-000-001) Subtask 53-21-00-110-069
C. Cleaning of the Structure
WARNING : USE SOLVENTS/CLEANING AGENTS, SEALANTS AND OTHER SPECIAL
_______ MATERIALS ONLY WITH A GOOD SUPPLY OF AIR. OBEY THE MANUFACTURERS INSTRUCTIONS. PUT ON PROTECTIVE CLOTHING. DO NOT GET THEM IN YOUR MOUTH. DO NOT SMOKE. DO NOT BREATHE THE GAS. THESE MATERIALS ARE POISONOUS, FLAMMABLE AND SKIN IRRITANT. GET MEDICAL HELP IF YOUR SKIN OR EYES BECOME IRRITATED.
(1) Clean the inspection area with CLEANING AGENTS (Material No. 11-004) and a lint-free cotton cloth MISCELLANEOUS (Material No. 19-003) if necessary.
4. Procedure
_________ Subtask 53-21-00-220-063
A. Inspection
(Ref. Fig. 610/TASK 53-21-00-991-006)
(1) Do a detailed inspection of the circumferential joint at FR24. This inspection is applicable between STGR6, left side and STGR6, right side.
EFF : ALL
53-21-00Page 654
May 01/05
R
CES
Circumferential Joint at FR24 Figure 610/TASK 53-21-00-991-006
R EFF : CES ALL 53-21-00 Page 655 May 01/05
(2) Make sure that there is no :
(a)
Corrosion damage :
-If you find corrosion damage, refer to the Structural Repair Manual (Ref. SRM 512200 P.Block 001) for types of corrosion, inspection, removal and corrosion protection.
(b)
Other damage (cracks, scratches, stress, marks, dents, bumps,...).
-If you find this type of damage, refer to the Structural Repair Manual (Ref. SRM 511100 P.Block 001) for damage classification and corrective action.
5. Close-up
________ Subtask 53-21-00-410-052
A. Installation of the Components
(1)
Make sure that the work area is clean and clear of tool(s) and other items.
(2)
Install the insulation blankets (Ref. TASK 25-80-00-400-001).
(3) Install the ceiling panels 231BC, 231CC (Ref. TASK 25-23-41-400-001). Subtask 53-21-00-942-058
B. Close Access
(1)
Close the FWD passenger/crew door (Ref. TASK 52-10-00-410-001).
(2)
Remove the access platform(s).
EFF : ALL
53-21-00Page 656
May 01/05
R
CES
TASK 53-21-00-200-024
Special Detailed Inspection of Circumferential Joint at FR 35, between Stringer 10 LH and Stringer 10 RH, External Side
1. Reason for the Job
__________________
Refer to the MPD TASK: 532186-01
2. Job Set-up Information
______________________
A. Fixtures, Tools, Test and Support Equipment
-------------------------------------------------------------------------------REFERENCE QTY DESIGNATION -------------------------------------------------------------------------------
No specific access platform 4 m (13 ft. 1 in.)
B. Consumable Materials
-------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
Material No. 11-004 USA MIL-T-81533 1.1.1TRICHLOROETHANE (METHYL CHLOROFORM) (Ref. 20-31-00)
Material No. 19-003 USA AMS 3819 LINT-FREE COTTON CLOTH (Ref. 20-31-00)
C. Referenced Information
-------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
中國航空網 www.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：A320飛機維護手冊 AMM FUSELAGE 機身1(145)
