EFF : ALL
53-11-00Page 605
3. Job Set-up__________
Subtask 53-11-00-010-051
A. Get Access
R (1) Put an access platform in position at the zone 831 (841).
R (2) Open the forward passenger/crew door 831 (841), (Ref. TASK 52-10-00-010-001).
Subtask 53-11-00-020-057
B. Removal of the Component
R R (1) Remove the forward corner of the scuff plate of the forward passenger/crew door (Ref. TASK 53-15-15-000-001).
Subtask 53-11-00-110-052
C. Cleaning of the Structure
WARNING : USE SOLVENTS/CLEANING AGENTS, SEALANTS AND OTHER SPECIAL_______ MATERIALS ONLY WITH A GOOD SUPPLY OF AIR. OBEY THE MANUFACTURERS INSTRUCTIONS. PUT ON PROTECTIVE CLOTHING. DO NOT GET THEM IN YOUR MOUTH. DO NOT SMOKE. DO NOT BREATHE THE GAS. THESE MATERIALS ARE POISONOUS, FLAMMABLE AND SKIN IRRITANT. GET MEDICAL HELP IF YOUR SKIN OR EYES BECOME IRRITATED.
R R R (1) Clean the inspection area with CLEANING AGENTS (Material No. 11-004) and a lint-free cotton cloth MISCELLANEOUS (Material No. 19-003), if necessary.
4. Procedure_________
Subtask 53-11-00-220-067
A. Inspection (Ref. Fig. 602/TASK 53-11-00-991-002)
R R (1) Do a detailed inspection of the structure of the forward lower corner below the scuff plate.
EFF : ALL
53-11-00Page 606
May 01/03
R Door Frame below the Forward Lower Corner of the Scuff Plate Figure 602/TASK 53-11-00-991-002
EFF : ALL
53-11-00Page 607
May 01/03
CES EFF : ALL
(2) Make sure that there is no:
R R (a) corrosion damage: - If you find corrosion damage, refer to the Structural Repair Manual (Ref. SRM 512200 P.Block 001) for types, inspection, removal and corrosion protection.
R R R (b) other damage (cracks, scratches, stress, marks, dents, bumps,...): - If you find other damage, refer to the Structural Repair Manual (Ref. SRM 511100 P.Block 001) for damage classification and corrective action.
5. Close-up________
Subtask 53-11-00-420-055
A. Installation of the Component
R R (1) Install the forward corner of the scuff plate of the forward passenger/crew door(Ref. TASK 53-15-15-400-001).
Subtask 53-11-00-410-051
B. Close Access
(1) Make sure that the work area is clean and clear of tool(s) and other items.
R (2) Close the forward passenger/crew door 831 (841), (Ref. TASK 52-10-00-410-001).
(3) Remove the access platform(s).
53-11-00Page 608
May 01/03
TASK 53-11-00-210-028
R Special Detailed Inspection of Forward Passenger/Crew Door Frame, Forward Lower R Corner underneath the Scuff Plate , LH and RH
1. Reason for the Job
__________________
Refer to the MPD TASK: 531104-02
2. Job Set-up Information
______________________
A. Fixtures, Tools, Test and Support Equipment
-------------------------------------------------------------------------------REFERENCE QTY DESIGNATION -------------------------------------------------------------------------------
R No specific access platform 3.5 m (11 ft. 6 in.)
B. Consumable Materials
-------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
Material No. 11-004 USA MIL-T-81533
1.1.1TRICHLOROETHANE (METHYL CHLOROFORM)
(Ref. 20-31-00)
Material No. 19-003 USA AMS 3819
LINT-FREE COTTON CLOTH (Ref. 20-31-00)
C. Referenced Information
-------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
52-10-00-010-001 Opening of the Passenger/Crew Door 52-10-00-410-001 Closing of the Passenger/Crew Door 53-15-15-000-001 Removal of the FWD Passenger/Crew Door Scuff Plates 53-15-15-400-001 Installation of the FWD Passenger/Crew Door Scuff
Plates
NTM 531104,P.Block-401
SRM 511100,P.Block 001 (for corrective action)
SRM 512200,P.Block 001 (for corrective action)
53-11-00-991-072 Fig. 603
中國航空網(wǎng) www.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：A320飛機維護手冊 AMM FUSELAGE 機身1(38)
