-If you find corrosion damage, refer to the Structural Repair Manual (Ref. SRM 512200 P.Block 001) for types, inspection, removal and corrosion protection.

 (b)
 other damage (cracks, scratches, stress, marks, dents, bumps,...):

 -If you find other damage, refer to the Structural Repair Manual (Ref. SRM 511100 P.Block 001) for damage classification and corrective action.
 5. Close-up
________ Subtask 53-11-00-410-057
 A. Close Access
 (1)
 Install the lining panel 211NW (212NW).

 (2)
 Install the lining panel 211PW (212PW).

 (3)
 Close the sliding window.

 (4)
 Make sure that the work area is clean and clear of tool(s) and other items.

 (5)
 Close the forward passenger/crew door 831 (841) (Ref. TASK 52-10-00-410-001).

 (6)
 Remove the access platform(s).

R  **ON A/C 001-049, 051-099, 101-105, 151-154, 201-207,
 TASK 53-11-00-210-029
 Special Detailed Inspection of Windshield Side Post at FR 4, Lower Attachment, Internal Side, LH/RH
 1. Reason for the Job
__________________
 Refer to the MPD TASK: 531133-02
 2. Job Set-up Information
______________________
 A. Fixtures, Tools, Test and Support Equipment
 -------------------------------------------------------------------------------REFERENCE QTY DESIGNATION -------------------------------------------------------------------------------
No specific  access platform 3.5 m (11 ft. 6 in.)
 B. Consumable Materials
 -------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
Material No. 11-004  USA MIL-T-81533
 1.1.1TRICHLOROETHANE (METHYL CHLOROFORM)
 (Ref. 20-31-00)

 Material No. 19-003  USA AMS 3819
 LINT-FREE COTTON CLOTH (Ref. 20-31-00)

 C. Referenced Information
 -------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
52-10-00-010-001 Opening of the Passenger/Crew Door
 52-10-00-410-001 Closing of the Passenger/Crew Door
 NTM 531133,P.Block-601
 SRM 511100,P.Block 001 (for corrective action)
 SRM 512200,P.Block 001 (for corrective action)
 53-11-00-991-040 Fig. 617
 53-11-00-991-075 Fig. 619

R  EFF : 001-049, 051-099, 101-105, 151-154, 53-11-00Page 672 201-207, May 01/05
 CES  3. Job Set-up

__________
 Subtask 53-11-00-010-069
 A. Get Access
 (1)
 Put an access platform in position at the zone 831 (841).

 (2)
 Open the forward passenger/crew door 831 (841) (Ref. TASK 52-10-00-010-001).

 (3)
 Open the sliding window.

 (4)
 Remove the lining panel 211PW (212PW).
 (Ref. Fig. 617/TASK 53-11-00-991-040)

 (5)
 Remove the lining panel 211NW (212NW) from the side post at FR4. (Ref. Fig. 617/TASK 53-11-00-991-040)

 Subtask 53-11-00-110-070
 B. Preparation of the Inspection Area
 (Ref. Fig. 619/TASK 53-11-00-991-075)

 WARNING : USE SOLVENTS/CLEANING AGENTS, SEALANTS AND OTHER SPECIAL
_______ MATERIALS ONLY WITH A GOOD SUPPLY OF AIR. OBEY THE MANUFACTURERS INSTRUCTIONS. PUT ON PROTECTIVE CLOTHING. DO NOT GET THEM IN YOUR MOUTH. DO NOT SMOKE. DO NOT BREATHE THE GAS. THESE MATERIALS ARE POISONOUS, FLAMMABLE AND SKIN IRRITANT. GET MEDICAL HELP IF YOUR SKIN OR EYES BECOME IRRITATED.
 WARNING : OBEY THE MANUFACTURER'S INSTRUCTIONS WHEN YOU USE THIS/THESE
_______ MATERIAL/S. USE PROTECTIVE CLOTHING, RUBBER GLOVES, GOGGLES AND A MASK.
 (1)
 Clean the inspection area with CLEANING AGENTS (Material No. 11-004) and a lint-free cotton cloth MISCELLANEOUS (Material No. 19-003), if necessary.

 (2)
 Make sure that the surface of the inspection area is clean and smooth.

 (3)
 Do a check of the inspection area for damage or discontinuities.

R  EFF : 001-049, 051-099, 101-105, 151-154, 53-11-00Page 673 201-207, May 01/05
 CES

 Lower Attachment Area of the Windshield Side Post at FR4 - Internal Side Figure 619/TASK 53-11-00-991-075

R  EFF : 001-049, 051-099, 101-105, 151-154, 53-11-00Page 674 201-207, May 01/05
 CES  (4) Make sure that there is no:

 (a)
 Corrosion damage:

 -If you find corrosion damage, refer to the Structural Repair Manual (Ref. SRM 512200,P.Block 001) types, inspection, removal and corrosion protection.
　
中國航空網 www.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：A320飛機維護手冊 AMM FUSELAGE 機身1(51)