CES CES
3. Job Set-up__________
Subtask 53-11-00-010-062
A. Get Access
R (1) Put an access platform in position at zone 824.
(2) Open the lateral avionics-compartment door 824 (Ref. TASK 52-41-00-010-002).
R Subtask 53-11-00-020-060-A
R R B. Removal of the Components (Ref. Fig. 629/TASK 53-11-00-991-093)
R R (1) Remove the two quick-release pins (1) and lift and remove the ladder (2), if necessary.
R R (2) Remove the floor panel 127BG (4) of the avionics compartment (Ref. TASK 53-12-13-000-001).
Subtask 53-11-00-110-076
C. Cleaning of the Structure
WARNING : USE SOLVENTS/CLEANING AGENTS, SEALANTS AND OTHER SPECIAL_______ MATERIALS ONLY WITH A GOOD SUPPLY OF AIR. OBEY THE MANUFACTURERS INSTRUCTIONS. PUT ON PROTECTIVE CLOTHING. DO NOT GET THEM IN YOUR MOUTH. DO NOT SMOKE. DO NOT BREATHE THE GAS. THESE MATERIALS ARE POISONOUS, FLAMMABLE AND SKIN IRRITANT. GET MEDICAL HELP IF YOUR SKIN OR EYES BECOME IRRITATED.
(1) Clean the inspection area with CLEANING AGENTS (Material No. 11-004) and a lint-free cotton cloth MISCELLANEOUS (Material No. 19-003), if necessary.
R R Ladder Figure 629/TASK 53-11-00-991-093
EFF : ALL 53-11-00 Page A609 Aug 01/03
CES
4. Procedure
_________
Subtask 53-11-00-220-085
A. Inspection (Ref. Fig. 630/TASK 53-11-00-991-022)
(1) Do a detailed inspection of: - The continuity fitting (1) between FR20 and FR21, - The angle fitting (2) on the two sides of FR21, at STGR41, left and right sides.
(2) Make sure that there is no:
R (a) Corrosion damage: - If you find corrosion damage, refer to the Structural Repair Manual (Ref. SRM 512200,P.Block 001) for types of corrosion, inspection, removal and corrosion protection.
R R (b) Other damage (cracks, scratches, stress, marks, dents, bumps,...): - If you find other damage, refer to the Structural Repair Manual (Ref. SRM 511100,P.Block 001) for damage classification and corrective action.
5. Close-up________
R Subtask 53-11-00-420-058-A
R R A. Installation of the Components (Ref. Fig. 629/TASK 53-11-00-991-093)
R R (1) Install the floor panel 127BG (4) in the avionics compartment (Ref. TASK 53-12-13-400-001).
R R (2) Install the ladder (2) on the floor fittings (3), if necessary, and install the two quick-release pins (1).
Subtask 53-11-00-410-062
B. Close Access
(1) Make sure that the work area is clean and clear of tool(s) and other items.
(2) Close the lateral avionics-compartment door 824 (Ref. TASK 52-41-00-410-002).
EFF : ALL 53-11-00Page A610 Feb 01/04
CES R Continuity Fitting between FR20 and FR21 and Angle Fittings at FR21 R Figure 630/TASK 53-11-00-991-022
EFF : ALL 53-11-00Page A611 Aug 01/03
CES
(3) Remove the access platform(s).
EFF : ALL 53-11-00Page A612
Aug 01/03
R
CES CES CES
TASK 53-11-00-210-803
R General Visual Inspection of NLG Bay, all Panels, LH/RH
1. Reason for the Job__________________
Refer to the MPD TASK: 531161-01
中國航空網 www.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：A320飛機維護手冊 AMM FUSELAGE 機身1(59)
