EFF : ALL
53-11-00Page 644
May 01/03
R Upper-Longitudinal Lap Joints - Upper Skin - External Surface from FR15 to FR16 R and FR20 to FR24 R Figure 611/TASK 53-11-00-991-008
R EFF : ALL 53-11-00Page 645 May 01/03
CES
R R R (b) other damage (cracks, scratches, stress, marks, dents, bumps,...): - If you find other damage, refer to the Structural Repair Manual (Ref. SRM 511100 P.Block 001) for damage classification and corrective action.
5. Close-up________
Subtask 53-11-00-942-056
A. Close Access
(1) Make sure that the work area is clean and clear of tool(s) and other items.
(2) Remove the access platform(s).
TASK 53-11-00-210-009
R Detailed Inspection of Outer Skin of Lateral Longitudinal Lap Joint, between FR R 11 and FR 14 and FR 20 and FR 24, LH/RH
1.
Reason for the Job
__________________
Refer to the MPD TASK: 531121-01
2.
Job Set-up Information
______________________
A. Fixtures, Tools, Test and Support Equipment
-------------------------------------------------------------------------------REFERENCE QTY DESIGNATION -------------------------------------------------------------------------------
No specific access platform 1.50 m (4 ft. 11 in.)
B. Consumable Materials
-------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
Material No. 11-004 USA MIL-T-81533
1.1.1TRICHLOROETHANE (METHYL CHLOROFORM)
(Ref. 20-31-00)
Material No. 19-003 USA AMS 3819
LINT-FREE COTTON CLOTH (Ref. 20-31-00)
C. Referenced Information
-------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
SRM 511100 P.Block 001 (for corrective action) SRM 512200 P.Block 001 (for corrective action) R 53-11-00-991-009 Fig. 612
3. Job Set-up__________
Subtask 53-11-00-941-057
A. Get Access
R (1) Put an access platform in position at the zone 120.
Subtask 53-11-00-110-061
B. Cleaning of the Structure
WARNING : USE SOLVENTS/CLEANING AGENTS, SEALANTS AND OTHER SPECIAL_______ MATERIALS ONLY WITH A GOOD SUPPLY OF AIR. OBEY THE MANUFACTURERS INSTRUCTIONS. PUT ON PROTECTIVE CLOTHING. DO NOT GET THEM IN YOUR MOUTH. DO NOT SMOKE. DO NOT BREATHE THE GAS. THESE MATERIALS ARE POISONOUS, FLAMMABLE AND SKIN IRRITANT. GET MEDICAL HELP IF YOUR SKIN OR EYES BECOME IRRITATED.
R R R (1) Clean the inspection areas with CLEANING AGENTS (Material No. 11-004) and a lint-free cotton cloth MISCELLANEOUS (Material No. 19-003), if necessary.
4. Procedure_________
Subtask 53-11-00-220-074
R A. Inspection (Ref. Fig. 612/TASK 53-11-00-991-009)
R R R R (1) Do a detailed inspection of the outer skin of the lateral-longitudinal lap joints. This inspection is applicable between FR11 and FR14, and between FR20 and FR24, left and right sides.
(2) Make sure that there is no:
R R (a) corrosion damage: - If you find corrosion damage, refer to the Structural Repair Manual (Ref. SRM 512200 P.Block 001) for types, inspection, removal and corrosion protection.
CES
R R Lateral-Longitudinal Lap Joints - Outer Skin from FR11 to FR14 and FR20 to FR24 Figure 612/TASK 53-11-00-991-009
EFF : ALL 53-11-00 Page 649 May 01/03
CES
R R R (b) other damage (cracks, scratches, stress, marks, dents, bumps,...): - If you find other damage, refer to the Structural Repair Manual (Ref. SRM 511100 P.Block 001) for damage classification and corrective action.
5. Close-up________
Subtask 53-11-00-942-057
中國航空網 www.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：A320飛機維護手冊 AMM FUSELAGE 機身1(46)
