53-21-00-991-052 Fig. 613
3. Job Set-up
__________ Subtask 53-21-00-941-083
A. Get Access
(1)
Put an access platform in position at the zone 825.
(2)
Open the forward cargo-compartment door 825 (Ref. TASK 52-30-00-860-001).
Subtask 53-21-00-010-089
B. Removal of the Component
(1) Remove the ceiling panel 131AC (Ref. TASK 25-54-12-000-002). Subtask 53-21-00-110-098
C. Cleaning of the Structure
WARNING : USE SOLVENTS/CLEANING AGENTS, SEALANTS AND OTHER SPECIAL
_______ MATERIALS ONLY WITH A GOOD SUPPLY OF AIR. OBEY THE MANUFACTURERS INSTRUCTIONS. PUT ON PROTECTIVE CLOTHING. DO NOT GET THEM IN YOUR MOUTH. DO NOT SMOKE. DO NOT BREATHE THE GAS. THESE MATERIALS ARE POISONOUS, FLAMMABLE AND SKIN IRRITANT. GET MEDICAL HELP IF YOUR SKIN OR EYES BECOME IRRITATED.
(1) Clean the inspection area with CLEANING AGENTS (Material No. 11-004) and a lint-free cotton cloth MISCELLANEOUS (Material No. 19-003), if necessary.
EFF : ALL
53-21-00Page 667
May 01/05
R
CES
4. Procedure
_________
Subtask 53-21-00-210-082
A. Inspection
(Ref. Fig. 613/TASK 53-21-00-991-052)
(1)
Do a visual inspection of the attach brackets of the forward cargo door actuator. This inspection is applicable between cabin floor beams, from FR25 to FR27.
(2)
Make sure that there is no:
(a)
Corrosion damage: If you find corrosion damage, refer to the Structural Repair Manual (Ref. SRM 512200 P.Block 001) for types of corrosion, inspection, removal and corrosion protection.
(b)
Other damage (cracks, scratches, stress, marks, dents, bumps,...): If you find other damage, refer to the Structural Repair Manual (Ref. SRM 511100 P.Block 001) for damage classification and corrective action.
5. Close-up
________ Subtask 53-21-00-410-085
A. Installation of the Component
(1) Make sure that the work area is clean and clear of tool(s) and other items.
(2) Install the ceiling panel 131AC (Ref. TASK 25-54-12-400-002). Subtask 53-21-00-942-089
B. Close Access WARNING : MAKE SURE THAT THE TRAVEL RANGES OF THE ELEVATORS ARE CLEAR
_______
DURING CARGO COMPARTMENT DOOR OPERATION.
(1)
Close the forward cargo-compartment door 825 (Ref. TASK 52-30-00-860-002).
(2)
Remove the access platform(s).
EFF : ALL
53-21-00Page 668
May 01/05
R
CES
Forward Cargo Door Actuator - Attach Brackets Figure 613/TASK 53-21-00-991-052
R EFF : CES ALL 53-21-00 Page 669 May 01/05
TASK 53-21-00-200-008
Detailed Inspection of Fuselage Skin and Visible Part of Window Forging Doublers around Cabin Windows, between FR 28 and FR 35 and between Stringer ...
1. Reason for the Job
__________________
Refer to the MPD TASK: 532160-01
2. Job Set-up Information
______________________
A. Fixtures, Tools, Test and Support Equipment
-------------------------------------------------------------------------------REFERENCE QTY DESIGNATION -------------------------------------------------------------------------------
No specific access platform 3.00 m (9 ft. 10 in.)
B. Consumable Materials
-------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
Material No. 11-004 USA MIL-T-81533
1.1.1TRICHLOROETHANE (METHYL CHLOROFORM)
(Ref. 20-31-00)
Material No. 19-003 USA AMS 3819 LINT-FREE COTTON CLOTH (Ref. 20-31-00)
C. Referenced Information
-------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
SRM 511100 P.Block 001 (for corrective action) SRM 512200 P.Block 001 (for corrective action) 53-21-00-991-008 Fig. 614
EFF : ALL
53-21-00Page 670
May 01/05
R
CES 3. Job Set-up
__________
Subtask 53-21-00-941-057
A. Get Access
(1) Put an access platform in position at the zone 231 (232) in front of the cabin windows.
中國航空網 www.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：A320飛機維護手冊 AMM FUSELAGE 機身1(148)
