(1)
Remove the systems A and B hydraulic power (Ref 27-61-00/201).

 S 865-011
 EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú

 27-61-41
 ALL  ú ú 01 Page 502 ú Jul 15/91
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A 737-300/400/500MAINTENANCE MANUAL
 (2)  S 085-012Remove the protractor and the protractor mount from the captain's aileron control wheel.
 (3)  S 085-013Remove the protractors and the protractor stands from the spoilers No. 2 and 6.
 (4)  S 865-014Remove the electrical power (Ref 24-22-00/201).

 EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú

 27-61-41
 ALL  ú ú 01 Page 503 ú Jul 15/91
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
737-300/400/500MAINTENANCE MANUAL
 SPOILER CONTROL QUADRANT - REMOVAL/INSTALLATION
_______________________________________________
 1.  General_______
 A.  There is one task in this procedure, an inspection of the spoiler control quadrant. To do the inspection, you measure the diameters of the bearings and the bolts that attach the aileron spring cartridge.
 TASK 27-61-41-226-001
 2.  Spoiler Control Quadrant Inspection___________________________________
 A.  Standard Tools and Equipment
 (1)  
Micrometer - 0 to 1 inch

 B.  
References

 (1)  
27-61-41/401, Spoiler Control Quadrant

 C.  
Access

 (1)  
Location Zone
 216, 217 Main Wheel Well

 D.  
Procedure

 S 026-002
 (1)  
Remove the aileron spring cartridge (Ref 27-61-41/401).

 S 226-003

 (2)  
Examine the bearings and bolts for worn areas (Fig. 601):

 (a)  
Remove the bolts and bearings.

 (b)  
Use a micrometer to measure the bolts and bearings.

 (c)  
Compare the dimensions you measured with the permitted dimensions shown in Fig. 601.

 (d)  
Replace the parts that are not in the tolerance.

 (e)  
Install the bearings.

 (3)  
Install the aileron spring cartridge (Ref 27-61-41/401).

 S 426-004
 EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú

 27-61-41
 ALL  ú ú 02 Page 601 ú Jul 15/91
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A

737-300/400/500
MAINTENANCE MANUAL

SPOILER 
CONTROL 
QUADRANT 
WHEEL WELL 
CEILING 
QUADRANT 
SHAFT 
SPOILER 
MIXER 
RIG PIN 
A/S-14 
A 
QUADRANT 
SHAFT 
SUPPORT 
BRACKET 
A 
B 
AILERON SPRING 
CARTRIDGE 
B 

Spoiler Control Quadrant Wear Limits
Figure 601 (Sheet 1)

EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú

 27-61-41
 ALL  ú ú 02 Page 602 ú Jul 15/91
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A 737-300/400/500MAINTENANCE MANUAL

B-B

THE MAXIMUM PERMITTED RADIAL PLAY OF THE BEARING IS 0.0020 INCH
Spoiler Control Quadrant Wear Limits Figure 601 (Sheet 2)
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú

 27-61-41
 ALL  ú ú 01 Page 603 ú Jul 15/91
　
中國航空網 www.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：737-300 400 500 AMM 飛機維護手冊 飛行操縱 FLIGHT CONTROLS 5(62)