曝光臺 注意防騙 網曝天貓店富美金盛家居專營店坑蒙拐騙欺詐消費者

BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
737-300/400/500MAINTENANCE MANUAL
 SPOILER CONTROL QUADRANT - REPAIRS
__________________________________
 1.  General_______
 A.  There is one task in this procedure, a repair of the spoiler control quadrant. The repair includes the replacement of the rivets that attach the aileron input crank to the spoiler control quadrant shaft.
 TASK 27-61-41-308-001
 2.  Spoiler Control Quadrant Repairs (Fig. 801)________________________________
 A.  Standard Tools and Equipment
 (1)  
Shear Rivets - MS20470D

 (2)  
Aluminum Foil Marker - BAC27DCT-13

 B.  
References

 (1)  
AMM 27-61-41/401, Spoiler Control Quadrant

 C.  
Access

 (1)  
Location Zone
 216, 217 Main Wheel Well

 D.  
Procedure

 S 028-002
 (1)
Remove the spoiler control quadrant shaft (AMM 27-61-41/401).

 S 358-003

 (2)  
Repair the quadrant shaft:

 CAUTION:_______DO NOT MAKE THE RIVET HOLES LARGER. YOU WILL CAUSE DAMAGE TO THE QUADRANT SHAFT AND THE AILERON INPUT CRANK.
 (a)  
Remove the broken parts of the rivets from the holes in the aileron input crank and the quadrant shaft.

 (b)  
Install the new rivets.

 (c)  
Examine the aluminum foil marker on the quadrant shaft. 1) Replace the marker if it is damaged or not there.

 (3)
Install the spoiler control quadrant shaft (AMM 27-61-41/401).

 S 428-004
 EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú

 27-61-41
 ALL  ú ú 02 Page 801 ú Nov 15/98
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A 737-300/400/500MAINTENANCE MANUAL
FORWARD BULKHEAD WHEEL WELL 
QUADRANT SHAFT SPOILER CONTROL 
CEILING WHEEL WELL 
HOLE SHEAR WITNESS (ONE SIDE ONLY) CRANK AILERON INPUT 0.067 0.062 INCH DIA 
(4 LOCATIONS) SHEAR RIVETS 
FOIL MARKER ALUMINUM DRUMS AILERON BUS CARTRIDGE AILERON SPRING  FWD 
Figure 801 Spoiler Control Quadrant Shaft 

EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú

 27-61-41
 ALL  ú ú 02 Page 802 ú Jul 15/91
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
737-300/400/500MAINTENANCE MANUAL
 FLIGHT SPOILER ACTUATOR - REMOVAL/INSTALLATION
______________________________________________
 1.  General_______
 A.  There are two tasks in this procedure. There is a task for the removal and a task for the installation of an actuator for the flight spoilers.
 TASK 27-61-51-004-001
 2.  Flight Spoiler Actuator Removal (Fig. 401)_______________________________
 A.  References
 (1)
AMM 24-22-00/201, Manual Control

 (2)
AMM 27-61-00/201, Spoiler Control System

 B.  
Access

 (1)  
Location Zone 101, 102 Control Cabin 307, 407 Wing Trailing Edge Outboard Flaps and Spoilers

SPOILER

Flight Spoiler Actuator Installation
Figure 401 (Sheet 1)

EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú

 27-61-51
 ALL  ú ú 02 Page 401 ú Jul 15/91
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A

737-300/400/500MAINTENANCE MANUAL
ACTUATOR LINK
SEE B
FWD 
CHECKNUT  PISTON ROD ACTUATOR  (4 LOCATIONS) ACTUATOR MOUNTING BOLT  ASEE INPUT ARM ACTUATOR 
SCREW ADJUSTMENT  LOCKWIRE  FLIGHT SPOILER ACTUATOR NO. 2 
INPUT ARM  (NO. 3, 6 AND 7 EQUIVALENT) 

A

FWD
ACTUATOR ACTUATOR
PISTON ROD INPUT ARM

B
Flight Spoiler Actuator Installation Figure 401 (Sheet 2)
　
中國航空網 www.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：737-300 400 500 AMM 飛機維護手冊 飛行操縱 FLIGHT CONTROLS 5(63)