56-21-00
 ALL  ú ú B01 Page 604 ú Jul 15/91
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
737-300/400/500MAINTENANCE MANUAL
WINDOW
FRAME
SEAL AND SPACER RING
SPRING CLIP (10 LOCATIONS)
OUTER 
WINDOW  MIDDLE 
PANE WINDOW 
PANE 
MIDDLE 
WINDOW 
A  WINDOW  SEAL  1PANE  WINDOW OUTER 
FORGING  PANE 

THE OUTER
A
SKIN CONTOUR
SEEA B
BREATHER HOLE EXAMPLE A-A INBD CRACKS OR CRAZING
0.050 INCH MAXIMUM CRACKS OR CRAZING
0.030 INCH MAXIMUM
BEVEL EDGE
0.265 INCH
0.265 INCH MINIMUM
MINIMUM
IN-PLANE
0.550 INCH MAXIMUM
0.550 INCH MAXIMUM
DELAMINATION (IN-PLANE CRACK) OUTER WINDOW PANE CRACK AND CRAZING LIMITS A
B
1 REPLACE THE MIDDLE WINDOW PANE IF YOU FIND CRACKS OR CRAZING
Passenger Compartment Window Inspection Figure 604
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú

 56-21-00
 ALL  ú ú B01 Page 605 ú Mar 15/95
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A 737-300/400/500MAINTENANCE MANUAL
 B. Standard Tools and Equipment
 (1)  Optical Micrometer - Model 966A or 966A1
 Monocle Industries

 P.O. Box 2426
 Coppell, Tx U.S.A. 75019
 Tel (214) 393-9920
 Fax (214) 393-9926

 C. References
 (1)  
56-21-00/401, Passenger Cabin Windows

 (2)  
56-21-00/801, Passenger Cabin Windows

 (3)  
Manufacturer's Overhaul Manual

 D. Access
 (1)  Location Zone
 100 Upper Half of Fuselage

 E. Procedure
 S 216-003-B00
 CAUTION: DO NOT PRESSURIZE THE AIRPLANE IF A MIDDLE WINDOW PANE HAS
_______
 CRACKS OR CRAZING. THE PRESSURE CAN BREAK THE WINDOW.

 CAUTION: APPLICATION OF PAINT OR OTHER UNAPPROVED OR NON-TRANSPARENT
_______ MATERIAL TO THE ACRYLIC PASSENGER WINDOW PANES PANES IS PROHIBITED. SOLVENT IN PAINT WILL CAUSE STRUCTURAL DAMAGE TO THE ACRYLIC AND THE PAINT WILL PREVENT DAMAGE DETECTION.
 (1) Examine the windows panes for cracks and crazing (Fig. 601 - 604):
 (a)  Replace the middle window pane if it has cracks or crazing (AMM 56-21-00/401).
 NOTE: Middle pane cracks that start from the vent hole and are
____ 0.062 inch or less in length do not need to be replaced.
 You can repair the middle window pane if the minimum thickness is 0.157 inch after you repair the pane (Ref Manufacturer's Overhaul Manual).
 (b)  Replace the outer window pane if the depth of a crack or crazing is 0.05 inch or more (Ref 56-21-00/401).
 NOTE: You can use an optical micrometer to measure the depth
____ of a crack. To get the correct dimension, multiply the micrometer indication by 1.49 (the acrylic plastic index of refraction).
 If you do not have an optical micrometer, use an accurate procedure to measure the depth of the crack.
 EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú

 56-21-00
 ALL  ú ú B02 Page 606 ú Nov 12/01
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
737-300/400/500MAINTENANCE MANUAL
 (c)  Replace the outer window pane that has a crack if the thickness after the repair will be less than 0.265 inch (Ref 56-21-00/401).
 NOTE: You can repair the outer window pane if the minimum
____ thickness is 0.265 inch after you repair the pane (Ref Manufacturer's Overhaul Manual).
 Cracks can start from scratches or crazing (Fig. 603 and 604).
 (d)  Replace the outer window pane if the depth of a crack or crazing is more than 0.030 inch on the bevel edge (Ref 56-21-00/401) (Fig. 604).
 NOTE: The depth of the crack or crazing must be less than
____ 0.030 inch if the window thickness is 0.265 inch. The maximum width of the bevel edge is 0.550 inch.
 S 216-014-B00
 (2)  Examine the window for erosion.
 NOTE:____The forward edge of the window can have erosion or chips. If the window looks bad, you can repair the window (Ref 56-21-00/801).
　
中國航空網 www.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：737-300 400 500 AMM 飛機維護手冊 WINDOWS(53)