(2)  
AMM 24-22-00/201, Manual Control

 (3)  
AMM 29-11-00/201, Main Hydraulic Supply System

 E.
Access

 (1)  
Location Zone
 585 Spoiler No. 1
 584 Spoiler No. 2
 583 Spoiler No. 3
 582 Spoiler No. 4
 682 Spoiler No. 9
 683 Spoiler No. 10
 684 Spoiler No. 11
 685 Spoiler No. 12

 F.
Procedure

 S 422-122
 (1)  
Install the thermal relief valve:

 (a)  
Install the new O-rings (23 and 25) and backup rings (22 and 24) on the valve (21) and the valve cap (20). 1) Apply the hydraulic fluid to the O-rings, the backup rings

 and the threads of the fittings.

 (b)  
Use a 5/16-18 bolt to install the valve. 1) Tighten the cap to 60-70 pound-inches (6.78-7.90 Nm).

 EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú

 27-61-05
 ALL  ú ú 01 Page 223 ú Jun 18/01
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
747-400 MAINTENANCE MANUAL
 2) Install the lockwire on the cap.
 S 862-104
 (2)
Remove the DO-NOT-CLOSE tags and close these circuit breakers:

 (a)  
P180, DC Power Distribution Panel
 1) 180E6, LATERAL CONT VLV SYS 2
 2) 180H23, LATERAL CONT VLV SYS 3

 S 862-105
 (3)  
Put the FLT CONTROL HYD POWER - WING switches for systems No. 2 and No. 3 on the pilots' overhead panel, P5, to the NORM position.

 S 862-106

 (4)  
Do this task: "Hydraulic System Pressurization" (AMM 29-11-00/201).

 S 872-107

 (5)  
Extend and retract the spoiler to bleed the hydraulic system.

 S 792-108

 (6)  
Examine the valve cap for leaks.

 G.
Put the Airplane Back to Its Usual Condition

 S 862-109
 (1)  
Put the flap control lever in the UP detent to retract the trailing edge flaps.

 S 862-110

 (2)  
Do this task: "Hydraulic System Depressurization"
 (AMM 29-11-00/201).

 (3)
Do this task: "Hydraulic Reservoir Servicing" (AMM 12-12-01/301).

 (4)  
Do this task: "Remove Electrical Power" (AMM 24-22-00/201).

 S 612-111
 S 862-112
 EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú

 27-61-05
 ALL  ú ú 01 Page 224 ú Jun 18/01
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A 747-400 MAINTENANCE MANUAL
 (5)  S 862-113Remove the DO-NOT-CLOSE tags and close these circuit breakers: (a) P7, Overhead Circuit Breaker Panel 1) 7G6, SPEED BRAKE AUTO CONT
 (6)  S 412-114Close the access panels.

 EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú

 27-61-05
 ALL  ú ú 01 Page 225 ú Jun 18/01
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
747-400 MAINTENANCE MANUAL
 INBOARD FLIGHT SPOILER QUADRANT - MAINTENANCE PRACTICES
_______________________________________________________
 1.  General_______
 A.  There are three tasks in this procedure. There is a task for the removal and a task for the installation of the quadrant on the inboard flight spoilers No. 5 or 8. There is also a task to repair the quadrants.
 B.  The repair procedure includes the replacement of the shear rivets. The rivets are in the controlled shear joint of the lever and the crank, and the rig pin plate and the mounting bracket.
 TASK 27-61-06-002-001
 2.  Inboard Flight Spoiler Quadrant Removal_______________________________________
 A.  References
 (1)  
　
中國航空網 www.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：747-400 AMM 飛機維護手冊 飛行操縱 FLIGHT CONTROLS 6(86)