5.  
A category B class rating means that the maintenance organisation approved in accordance with Section A, Subpart F of CAR-M may carry out maintenance on the uninstalled engine and/or APU and engine and/or APU components, in accordance with engine and/or APU maintenance data or, if agreed by DGCA, in accordance with component maintenance data, only whilst such components are fitted to the engine and/or APU. Nevertheless, such B-rated approved maintenance organisation may temporarily remove a component for maintenance, in order to improve access to that component, except when such removal generates the need for additional maintenance not eligible for the provisions of this paragraph. The limitation section will specify the scope of such maintenance thereby indicating the extent of approval. A maintenance organisation approved in accordance with Section A, Subpart F of CAR-M with a category B class rating may also carry out maintenance on an installed engine during “base” and “line” maintenance subject to a control procedure in the maintenance organisation exposition. The maintenance organisation exposition scope of work shall reflect such activity where permitted by DGCA

6.  
A category C class rating means that the M.A. Subpart F approved maintenance organisation may carry out maintenance on uninstalled components (excluding

Rev 0, dated 2nd March, 2010 engines and APUs) intended for fitment to the aircraft or engine/APU. The limitation section will specify the scope of such maintenance thereby indicating the extent of approval. A Subpart-F approved maintenance organisation with a category C class rating may also carry out maintenance on an installed component during base and line maintenance or at an engine/APU maintenance facility subject to a control procedure in the maintenance organisation exposition. The maintenance organisation exposition scope of work shall reflect such activity where permitted by the DGCA.
7.  
A category D class rating is a self contained class rating not necessarily related to a specific aircraft, engine or other component. The D1 — Non-Destructive Testing (NDT) rating is only necessary for a Subpart-F approved maintenance organisation that carries out NDT as a particular task for another organisation. A M.A. Subpart F approved maintenance organisation with a class rating in A or B or C category may carry out NDT on products it is maintaining subject to the maintenance organisation exposition containing NDT procedures, without the need for a D1 class rating.

8.  
The ‘limitation’ section is intended to give the D.G.C.A maximum flexibility to customise the approval to a particular organisation. Table 1 specifies the types of limitation possible and whilst maintenance is listed last in each class rating it is acceptable to stress the maintenance task rather than the aircraft or engine type or manufacturer, if this is more appropriate to the organisation. An example could be avionic systems installations and maintenance.

9.  
Table 1 makes reference to series, type and group in the limitation section of class A and B. Series means a specific type series such as Cessna 150 or Cessna 172 or Beech 55 series or continental O-200 series etc. Type means a specific type or model such as Cessna 1 72RG type. Any number of series or types may be quoted. Group means for example Cessna single piston engined aircraft or Lycoming non-supercharged piston engines etc.

10.  
When a lengthy capability list is used which could be subject to frequent amendment, then such amendment shall be in accordance with a procedure acceptable to the D.G.C.A and included in the maintenance organisation exposition. The procedure shall address the issues of who is responsible for capability list amendment control and the actions that need to be taken for amendment. Such actions include ensuring compliance with Subpart-F for products or services added to the list.
　
中國航空網 www.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：CONTINUING AIRWORTHINESS REQUIREMENTS CAR -M(35)