曝光臺 注意防騙 網曝天貓店富美金盛家居專營店坑蒙拐騙欺詐消費者

until after power on the unit has been cycled.
HostBits Number of host bits as opposed to network
bits in network mask. A CIDR class C network
uses 24 network bits and 8 host bits. (Class A
= 24, Class B = 16).
This value can be changed by pressing the
SET key and entering a new value from the
keypad. Any change to this value will NOT
take effect until after power on the unit has
been cycled.
Port No TCP remote port number. This value must be
set to 5025 (SCPI) to support the built in web
page.
This value can be changed by pressing the
SET key and entering a new value from the
California Instruments 71
User Manual Compact i/iX Series
ENTRY DESCRIPTION
keypad. Any change to this value will NOT
take effect until after power on the unit has
been cycled.
California Instruments 72
User Manual Compact i/iX Series
4.2.10 CALIBRATION Menus
The measurement calibration menu can be used to perform routine calibration of the internal
measurement system. The recommended calibration interval is 12 months. To enter the calibration
screens, the calibration password must be entered first.
Note: Refer to chapter 6 for details on routine calibration procedures and equipment requirements. Do
not attempt calibration without consulting the user manual.
This menu also contains the LCD viewing angle adjustment.
ENTRY DESCRIPTION
VIEW ANGLE -10 to +10 LCD viewing angle adjustment.
CAL PWORD V range Calibration password required to access all
calibration screens. The calibration password
is the high voltage range value. [300 ] The
password can be entered using the keypad or
shuttle followed by the ENTER key.
Measurement Calibration Screens
MVOLT FS ± 9999 Calibration coefficient for full-scale voltage
measurement.
MCURR FS ± 9999 Calibration coefficient for full-scale current
measurement.
Output Calibration Screens
VOLT FS ± 9999 Calibration coefficient for voltage output.
PHASE OFST 0.0 - 360.0 Phase offset calibration for units equipped
with the –LKS option. Determines phase offset
from –LKM master clock.
California Instruments 73
User Manual Compact i/iX Series
4.2.11 APPLICATIONS Menu
Note that some of the application options list n may not be available on all i/iX models
and may not be configured. In this case, these fields in these menus will display “N/A” (not applicable)
an no access to these m will be availa
ed in this sectio
d enus ble.
pplication specific firmware functions if a
which case this screen
The Applications menu pro s access to a vailable. Note
that there may be no applications installed in will still be shown but has no
fun
vide
ction.
Possible applications are DO160 and MIL704. To access either of the application screens, position the
c rsor on the APPLICATIO ntry and pre n and
press ENTER.
u NS e ss the ENTER key. Select the desired applicatio
4.2.12 OPTIONS Menu
The Options menu provides access to available opti
ins in which case thi still be function. The option settings are
pro d and cannot be c he use re provided for information purposes
ly.
onal features. Note that there may be no options
talled
tecte
s screen will
hanged by t
shown but has no
r. These screens a
on
California Instruments 74
User Manual Compact i/iX Series
ENTRY DESCRIPTION
LANGUAGE ON If –ABL option is installed, this field will
indicate ON.
N/A Default is N/A. All Compact i/iX support SCPI
syntax standard.
ADVANCE ON Standard on all iX Series models.
N/A This feature is not available on i Se
models. N/A is shown.
ries
CLOCK/LOC N/A no –LKM option
is installed, this field will show N/A.
Clock and lock is an option. If
MAST -LKM Option installed. The unit can be used
as a Clock and Lock system master or standalone.
AUX -LKS option installed. The unit can be used as
a Clock and Lock system auxiliary or standalone.
MIL704 ON or N/A Mil-Std 704 Rev D,E test option.
(Rev A,B,C and F provided through iXGui Windows
software.)
DO160 ON or N/A RTCA-DO160 Rev D test option.
MS704 ON or N/A N/A
ABD ON or N/A Airbus ABD0100.1.8 test option.
WHM ON or N/A Watt Hour Meter option.
MB ON or N/A Multi-box option.
California Instruments 75
User Manual Compact i/iX Series
4.2.13 Elapsed Time and Temperature Screen
The Etime/Temp screen displays the elapsed time since the power source has first been turned on.
This is an accumulated total time in hours, minutes and seconds.
　
中國航空網 www.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：航空資料11(137)