曝光臺 注意防騙 網曝天貓店富美金盛家居專營店坑蒙拐騙欺詐消費者

Project Magenta Revision: 12 March-08
83
When you see the startup Project Magenta logo and the Instructor Station text, you can click with the
mouse to make it go away faster.
Instructor Station Keyboard Commands
Q – Quit Program
Esc – Menu
Ctrl-W – Full Screen Mode
Instructor Station - Instructor Mode
Cursor Keys – Screen Position
Numeric +/- - Screen Size
Instructor Station - Map Mode
Cursor Keys – Lat/Lon Position
Numeric +/- - Zoom Level
Shift-Cursor Keys – Command Bar Position
Ctrl-F – Find Navaid/Airport
V – VOR Toggle
N – NDB Toggle
I – ILS Toggle
W – Fix/Waypoints Toggle
A – Airport Toggle
F - Frequency Toggle
Project Magenta Revision: 12 March-08
84
Instructor Main Screen
This page gives you an overview of the connections pmInst can make to the simulator and other software.
As a general rule, white text items can be clicked on, blue or magenta text is for information only. The
following screenshots are made in full screen instructor mode (to set the program in a Windows full screen
mode, press [W])
Instructor Main Menu
Clicking on items such as the latitude, longitude, altitude etc. will take you from this to the POSITION page.
SLEW and FLIGHT CONTROLS will take you to the respective pages.
MAP SCREEN MODE will switch to that setting, BLACK display will allow you to change the background
appearance of the full screen mode.
pmInst will also list the programs it detects in the network, together with some basic information as well as
the reference airport. This airport can be set in the POSITION menu and will automatically be the nearest
airport once the program starts up.
In the bottom row of the instructor screen you will find a list of the main screens that can be accessed in
this program, as well as some options for pausing or positioning the screen. The currently selected page is
Project Magenta Revision: 12 March-08
85
highlighted in green, the current pause mode is highlighted in red. The three pause modes that can be
selected are:
SLEW – Flight Simulator Re-Positioning mode
FREEZE – Flight Simulator Pause Mode
FLIGHT FREEZE – Pause Mode where the Lat/Lon position is fixed, but the aircraft can be flown
These items can be selected on all Instructor Screens. Clicking on them activates the page/function.
The position of the screen and the menu itself can be changed by pressing the cursor keys
(up/down/left/right) and can be re-sized using the Numeric Keypad + and – keys.
Project Magenta Revision: 12 March-08
86
Instructor POSITION Screen
The positioning of the aircraft can be performed on this screen. Clicking on the ICAO code of the reference
airport allows you to change it. This can be done by entering the code directly or finding it in a list.
Pushback is only available when the aircraft is on the ground, ideally, the pause mode should be disabled
for this feature.
The reference airport is important to understand the operation of this page. All subsequent actions
performed on the aircraft are made based on the selected airport and runway. Thus, clicking on HOLD L
will now position the aircraft holding left of runway 04R at John F Kennedy airport in New York.
For instance, to position the aircraft 7 NM from the touchdown zone of runway 31R at KJFK, click on the
runway text, then select it from the list that is presented to you. As an option, you can also force the
setting of the ILS frequency by clicking on it. If the ILS for a given runway is not active, it will be indicated
by a blinking text.
Once the runway has been selected, click on the text 7 NM. This will instruct the flight simulator to position
itself at the given distance and respective altitude for the current reference runway. Depending on how far
the new position is from the present location of the flight simulator and the speed of the main FS
Project Magenta Revision: 12 March-08
87
computer, this action may take several seconds. You should see the text SETTING POSITION in the center
of the screen. Once the re-positioning is completed, the scenery is re-loaded and the simulator is paused.
The precise type of pause, FREEZE or FLIGHT FREEZE, can be set in the options menu.
The message POSITION SET (FREEZE ON) appears if FREEZE is selected as a mode.
Please note that depending on the settings of your flight simulator, the continuation of a flight may be
unstable after re-positioning. For this, the flight freeze mode can be used to set the desired configuration
and speeds. Under some circumstances you may have to force another repositioning command. Normally,
　
中國航空網 www.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：航空資料13(26)